Panasonic LCD Projector Pt Rz670 Operating Instructions

Chapter 3 Basic Operations — Projecting
ENGLISH - 61
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1) Press the  button on the remote control while the shift adjustment screen is displayed.
 fThe  [HOME POSITION]  screen is displayed.
LENS
HOME POSITION
EXECUTE
CANCEL
ENTERMENU
2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the  
button.
 f[PROGRESS] is displayed in the  [HOME POSITION] screen, and...

Chapter 3 Basic Operations — Operating with the remote control
62 - ENGLISH
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image 
temporarily.
 button
1) Press the  button.
 f The image disappears.
 fThis operation can be also performed using the  button on the control panel.
2) Press the  button again.
 fThe image is displayed.
Note
 fThe power indicator...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 63
Switching the input
The input for projection can be switched.
 button
1) Press the input selection (, , , , , ) button.
 fThis operation can be also performed using the buttons on the control pa\
nel.
 Switches the input to RGB1 or RGB2. Switches to the other input when one input has already been 
chosen.
 Switches the input to DIGITAL LINK.
 Switches the input to DVI
- D.

*1Switches the input to RGB1.

*2Switches the input to...

Chapter 3 Basic Operations — Operating with the remote control
64 - ENGLISH
Using the Automatic setup function
The automatic setup function can be used to automatically adjust the resolution, clock phase, and image position when analog RGB signals 
consisting of bitmap images such as computer signals are being input, or to automatically adjust the image position when DVI- D/HDMI signals 
are input.  Supplying images with bright white borders at the edges and high-contrast black and white characters is...

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 65
Setting the remote control ID numbers
When you use the multiple projectors together, you can operate all the projectors simultaneously or each projector in\
dividually using single 
remote control, if a unique ID number is assigned to each projector.
After setting the ID number of the projector, set same ID number on the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector,...

66 - ENGLISH
Chapter 4 Settings
This chapter describes the settings and adjustments you can make using t\
he on-screen menu.   

Chapter 4 Settings — Menu navigation
ENGLISH - 67
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
Operating procedure
 button
1) Press the  button on the remote control or control panel.
 fThe  [MAIN MENU] screen is displayed.
MAIN MENUPICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
P IN P
ENTER
2) Press  as to select an...

Chapter 4 Settings — Menu navigation
68 - ENGLISH
4) Press as to select a sub-menu, and press qw or the  button to change or adjust settings.
 fSome items will switch in order as follows each time you press  qw .
ABC
 fFor some items, press  qw to display an individual adjustment screen with a bar scale as shown be\
low.
0CONTRAST
ADJUST
Note
 fPressing the  button while the menu screen is displayed returns to the previous menu. fDepending on the signals to be input to the projector
, some items or...

Chapter 4 Settings — Menu navigation
ENGLISH - 69
Main menu itemPage
[PROJECTOR SETUP] 107
[P IN P]125
[TEST PATTERN]127
[SIGNAL LIST]128
[SECURITY]131
[NETWORK]135
Sub-menu
The sub-menu of the selected main menu item is displayed, and you can se\
t and adjust items in the sub-menu.
[PICTURE] 
Sub-menu itemFactory defaultPage
[PICTURE MODE] [STANDARD]
*172
[CONTRAST] [0]72
[BRIGHTNESS] [0]72
[COLOR] [0]73
[TINT] [0]73
[COLOR TEMPERATURE] [DEFAULT]73
[WHITE GAIN] [+10]75
[GAMMA] [DEFAULT]75
[SYSTEM...

Chapter 4 Settings — Menu navigation
70 - ENGLISH
Sub-menu itemFactory defaultPage
[CLAMP POSITION] [24]
*186
[EDGE BLENDING] [OFF]87
[FRAME RESPONSE] [NORMAL]88
[RASTER POSITION] ―89
*1 Depends on the signal input.
Note
 fSub-menu items and factory default settings vary depending on the selected input terminal.
[DISPLAY LANGUAGE] 
Details (x page 90)
[DISPLAY OPTION] 
Sub-menu item Factory defaultPage
[COLOR MATCHING] [OFF]91
[COLOR CORRECTION] [OFF]92
[SCREEN SETTING] ―92
[AUTO SIGNAL] [OFF]93
[AUTO...