Panasonic Kx Tg4500 Operating Instructions Manual

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp81
Caller ID edit
 
You can turn the Caller ID number auto 
edit feature (page 49) on or off. The default 
setting is ON.
Using the base unit
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {}, then press 
{ENTER}.
3Scroll to “Caller ID edit” by 
pressing {}, then press 
{ENTER}.
4Press {} to select “On” or 
“Off”.
5Press {ENTER}.
LConfirmation tone is heard. 
Using the cordless handset
1Press {MENU}.
2Scroll to...

Programmable Settings
82For assistance, please visit http://www.panasonic.com/phonehelp
Display options
Adjusting the LCD 
contrast
 
You can adjust the base unit and cordless 
handset display contrast. There are six 
levels; the default setting is level three.
Note:
LProgramming must be carried out 
separately for the base unit and cordless 
handset(s).
Base unit LCD contrast
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {}, then press 
{ENTER}.
3Scroll to “LCD contrast” by pressing 
{}, then...

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp83
Telephone settings
Selecting the flash time
The flash time depends on your telephone 
exchange or host PBX. 
You can select: “90ms” (milliseconds), 
“100ms”, “110ms”, “250ms”, “300ms”, 
“400ms”, “600ms”, or “700ms”.
Each line has its own setting. The default 
setting for all lines is “700ms”.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {}, then press 
{ENTER}. 
3Scroll to “Set telephone line” by 
pressing...

Programmable Settings
84For assistance, please visit http://www.panasonic.com/phonehelp
Cordless handset line selection 
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press  .
3 Scroll to “Line selection” by 
pressing {V} or {^}, then press  . 
4Press {V} or {^} to select the desired 
line.
5Press .
LConfirmation tone is heard. 
Setting up the telephone 
line
Restricting calls  
You can prevent selected phone numbers 
from being dialed by the base unit and 
cordless...

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp85
10Press {ENTER}.
LConfirmation tone is heard.
In the above example, phone numbers 
that start with “111” are restricted for 
cordless handsets 1, 2, 8 and the base 
unit.
LTo store a second call restriction 
number, repeat from step 4.
LTo return to standby mode, press 
{EXIT}.
Canceling the restricted number
Repeat step 1 through step 6 under “To set 
up call restriction” on page 84. Press and 
hold {CLEAR}, followed...

Programmable Settings
86For assistance, please visit http://www.panasonic.com/phonehelp
The following describes how to set-up the 
number to be alerted, turn the feature on, 
and verify that the cell phone/paging 
device is called.
Note:
LWhen a message has been transferred 
or delivered from another user, the unit 
will not alert your cell phone/paging 
device. 
LProgramming must be carried out 
separately for the base unit and cordless 
handset(s).
“Alert number”. Defines the alert 
number.
“Alert...

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp87
Note:
LTo display the currently set alert number 
without changing it, perform steps 1 
through 5 above. 
Automatically deleting 
messages
If this feature is set to ON, messages in the 
mailboxes will automatically be erased 
after a month. Your phone comes from the 
factory set to “OFF”.
1While in standby mode, press {MENU}.
2Scroll to “Initial setting” by 
pressing {}, then press 
{ENTER}.
3Scroll to “Mailbox” by...

Programmable Settings
88For assistance, please visit http://www.panasonic.com/phonehelp
3Scroll to “Music on hold” by pressing 
{}, then press {ENTER}.
4Scroll to “Music on hold on/off” by 
pressing {}, then press 
{ENTER}.
LThe current setting is displayed.
5Select “On” or “Off” by pressing {}, then press {ENTER}.
LThe confirmation screen is displayed 
and confirmation tone is heard.
Recording music on hold
You can record music or a message for 
callers to hear when they are on hold.
Recording is...

Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp89
Erasing the current music on 
hold 
Note:
LYou cannot erase the unit’s 
pre-recorded music.
1Follow step 1 through step 4 under 
“Recording music on hold” on page 88.
2While the current music on hold is 
playing, press {CLEAR}.
LThe pre-recorded music on hold is set.
Other options
Selecting key tone
You can select whether key tones are 
heard when keys are pressed. Includes 
confirmation and error tones. The default...

Programmable Settings
90For assistance, please visit http://www.panasonic.com/phonehelp
Storing speed dial numbers
 
You can store up to 10 speed dial 
numbers. The base unit and cordless 
handset(s) speed dial numbers can be set 
independently of one another. Use the 
dialing keys ({0} to {9}) to dial the stored 
numbers.
Note:
LIf required, you can include {*}, {#}, 
{PAUSE} (page 41) or {FLASH} (page 
41) in the speed dial number.
Using the base unit
1Press {MENU}.
2Scroll to “Speed dial #” by...