Panasonic Kx Tg2730 Operating Instructions Manual

31
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
1
Press (DIGITAL!SP-PHONE).
•The DIGITAL SP-PHONE indicator and the IN USE indicator light.
2
Dial a phone number.
3
When the other party answers, talk into the MIC (microphone).
4
To hang up, press (DIGITAL!SP-PHONE).
•The indicator lights go out.
•To switch to the handset while using the base unit speakerphone:
– If the handset is off the base unit, press  or  on the handset, then
press (DIGITAL!SP-PHONE)on the base unit.
– If on...

Making Calls
32To adjust the speaker volume (8 levels) while talking
To increase, press Ñ.
To decrease, press 
Ö.
•The volume level is displayed.
To redial the last number dialed on the base unit
Press (DIGITAL!SP-PHONE)and press (REDIAL/PAUSE).
To put a call on hold
Press (HOLD).
•The DIGITAL SP-PHONE indicator and IN USE indicator lights start to flash.
•If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4
additional minutes on hold the call will be disconnected.
To...

Answering Calls
33
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262)
When a call is received, the unit rings and “Incoming call” is displayed
on the handset and the IN USE indicator flashes quickly on the base unit. 
If you subscribe to a Caller ID service, the calling party information will be
displayed after the first ring (p. 34). In order to view the Caller ID
information, please wait until the second ring to answer a call.
Handset
1
Press .
•You can also answer a call by pressing...

Caller ID Service
34
This unit is compatible with a Caller ID service offered by your telephone
company. If you subscribe to a Caller ID service, the calling party’s
information will be shown on the handset after the first ring.
The handset can record information of up to 50 different callers, including
the time and date received and the number of times called, in the Caller
List. The Caller List information is sorted by the most recent to the oldest
call. When the 51st call is received, the first call is...

1
Press Öor Ñto enter the Caller List.
•The display will show, for example, the
following.
2
To search from the most recent call, 
press 
Ö.
To search from the oldest call, press 
Ñ.
•To scroll between callers, press Öor Ñ.
3
To exit the list, press (OFF).
Using the Caller List
35
Cordless Telephone
For assistance, please call: 1-800-211-PANA(7262) •If “No items stored” is displayed, the Caller List is empty.
•
If there is no name information for a caller, the display will only show the phone number....

What “√” means
When the display shows “√”, you have already
viewed this calling information, answered the call
or called back the caller. If the same caller calls
again, the call entry with “√” will be replaced with
the new call entry.
If a caller calls more than once
The number of times the same caller called is
displayed (✕2 to ✕9). The date and time of the
most recent call will be recorded. After checking,
✕2 to ✕9 will be replaced with “√”.
Calling Back from the Caller List
1
Press Öor Ñto enter the...

Make sure the handset is not being used.
1
Press Öor Ñto enter the Caller List.
2
Scroll to the desired caller by pressing
Öor Ñ.
3
Press the right soft key ( ) to
select a pattern.
•Each time you press the right soft key
( ), the number is rearranged into
one of 3 patterns.
a
b– 
c1 – – 
•The order in which patterns a–care
displayed depends on how the telephone
number is displayed in step 2.
4
After editing the number, you can continue with calling back or storing
procedures. To call back, press  ,  ,...

Using the Caller List
38
The Caller ID Number Auto Edit Feature
There are 3 patterns of phone number (a, b, and c, p. 37). This feature
allows your phone to automatically edit an in-coming Caller ID number into
one pattern you preferred, and display the Caller ID number with that
pattern on the handset automatically.
After this feature is activated, Caller ID numbers coming from considered
area codes (201, for example), from which the Caller ID numbers have
been chosen to follow the desired pattern (7...

Storing Caller List Information in the Directory
You can store phone numbers that are in the Caller List into the directory. 
Make sure the handset is not being used.
1
Press Öor Ñto enter the Caller List.
2
Scroll to the caller you want to store in the
directory by pressing 
Öor Ñ.
•If the number requires editing, press the right
soft key ( ) (p. 37).
3
Press á.
•To stop storing, press Ü.
4
Press áagain.
•A beep sounds.
•To continue storing other items, repeat from 
step 2.
•To exit the programming...

Using the Caller List
40
Erasing Caller List Information
After checking the Caller List, you can erase some or all of the entries.
Make sure the handset is not being used.
To erase a specific caller from the Caller List
1
Press Öor Ñto enter the Caller List.
2
Scroll to the caller you want to erase from
the Caller List by pressing 
Öor Ñ.
3
Press (HOLD/CLEAR).
•A beep sounds and the information is erased.
•To erase other items, repeat from step 2.
•To exit the Caller List, press (OFF).
To erase all...