Home > Panasonic > Wireless PBX > Panasonic Kx Taw848 PC Cprogramming Manual

Panasonic Kx Taw848 PC Cprogramming Manual

Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.

Page 71

2.7 [1] Configuration
PC Programming Manual 71
Feature Manual References
1.19.3 Voice Mail (VM) Group
DPT Type—Location No. (for Hybrid port)
Specifies the location number of the connected DSS Console. 
Default
1
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
None
DPT Type—VM Unit No. (for Hybrid port)
Selects the unit number of the connected VPS.
Default
1
Value Range
1
Maintenance Console Location
2.7.4 [1-1]...

Page 72

2.7 [1] Configuration
72 PC Programming Manual
Value Range
1–4
Maintenance Console Location
2.7.4 [1-1] Slot—Extension Port
Programming Manual References
None
Feature Manual References
1.19.3 Voice Mail (VM) Group
2.7.5 [1-1] Slot—Extension Port—Port Command
Commands for the extension ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port—Port Command
Programming Manual References
2.7.4 [1-1]...

Page 73

2.7 [1] Configuration
PC Programming Manual 73
Maintenance Console Location
2.7.5 [1-1] Slot—Extension Port—Port Command
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
2.7.6 [1-1] Slot—Extension Port—Port Type View
Displays the number of connected telephones and Cell Stations (CSs). 
This screen can only be accessed in Interactive mode.
Ty p e
Indicates the types of telephone (reference only).
Default
Not applicable.
Value Range
APT, SLT, DSS Console, VM,...

Page 74

2.7 [1] Configuration
74 PC Programming Manual
Programming Manual References
2.7.4 [1-1] Slot—Extension Port
Feature Manual References
None
2.7.7 [1-1] Slot—LCO Card Property
The properties of the analog CO line cards can be specified.
Outgoing Guard Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the 
line.
Default
3 s
Value Range
3–6 s
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual...

Page 75

2.7 [1] Configuration
PC Programming Manual 75
Feature Manual References
None
CO Feed Back Tone
Specifies whether the pulse feedback tone is turned on or not. For outgoing CO line calls, audible 
tones can be heard as the dialed number is sent out, which informs the extension user that the 
number has been dialed.
Default
Ye s
Value Range
No, Yes
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Bell Detection—Bell Start...

Page 76

2.7 [1] Configuration
76 PC Programming Manual
Default
6.0 s
Value Range
1.0 s–15.0 s
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
None
Feature Manual References
None
Pulse / DTMF Dial—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have 
enough time to accept the dialed digits correctly.
Default
112 ms
Value Range
64 + 16 × n (n=0–15) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card...

Page 77

2.7 [1] Configuration
PC Programming Manual 77
Programming Manual References
None
Feature Manual References
None
Low Speed Pulse Dial—Pulse % Break
Specifies the % break for a low speed pulse dial. This is the ratio between the break (on-hook) signal 
and make (off-hook) signal in a pulse dial.
Default
60 %
Value Range
Other, 60 %, 67 %
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature Manual References
None
Low Speed Pulse...

Page 78

2.7 [1] Configuration
78 PC Programming Manual
Low Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a low speed pulse dial. Low Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Default
40 ms
Value Range
4 × n (n=3–15) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature Manual References
None
High Speed Pulse Dial—Pulse % Break
Specifies the % break...

Page 79

2.7 [1] Configuration
PC Programming Manual 79
Value Range
4 × n (n=4–18) ms
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.8 [1-1] Slot—LCO Port
Feature Manual References
None
High Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a high speed pulse dial. High Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Default
20 ms
Value Range
4 × n (n=3–15) ms
Maintenance Console...

Page 80

2.7 [1] Configuration
80 PC Programming Manual
Feature Manual References
None
Option Card Equipment—Option 1 and Option 2
Indicates the type of the card that is installed on the LCOT card (reference only).
Default
Current option card type
Value Range
None, Caller ID Card
Maintenance Console Location
2.7.7 [1-1] Slot—LCO Card Property
Programming Manual References
2.7.8 [1-1] Slot—LCO Port—Caller ID Detection
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID Signalling
Selects the type of...
Start reading Panasonic Kx Taw848 PC Cprogramming Manual

Related Manuals for Panasonic Kx Taw848 PC Cprogramming Manual

All Panasonic manuals