Panasonic Kx Taw848 PC Cprogramming Manual
Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 111
2.8 [2] System PC Programming Manual 111 DISA—CO-to-CO Call Prolong Counter Specifies the number of times that the caller can prolong a CO-to-CO line call on a DISA line. (Selecting 0 enables the caller to prolong the CO-to-CO line call without restriction.) Default 10 Value Range 0–15 Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.4 [5-3-2] Voice Message—DISA Message Feature Manual References 1.4.6 DISA (Direct Inward System Access) DISA—CO-to-CO Call...
Page 112
2.8 [2] System 112 PC Programming Manual Value Range 0–7 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.4 [5-3-2] Voice Message—DISA Message Feature Manual References 1.12.1 OGM (Outgoing Message) DISA—Reorder Tone Duration Specifies the length of time that a reorder tone is sent to the caller before the call is disconnected. Default 10 s Value Range 1–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.4...
Page 113
2.8 [2] System PC Programming Manual 113 Feature Manual References 1.4.10 Doorphone Call Doorphone—Call Duration Specifies the length of time until an answered doorphone call is disconnected. Default 60 s Value Range 10 × n (n=0–30) s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.11.1 [5-1] Doorphone Feature Manual References 1.4.10 Doorphone Call Doorphone—Open Duration Specifies the length of time that a door stays unlocked after being opened from an...
Page 114
2.8 [2] System 114 PC Programming Manual Value Range 1–15 Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.17.3 Timed Reminder Timed Reminder—Interval Time Specifies the length of time between the repeated alarms. Default 30 s Value Range 10 × n (n=1–120) s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.17.3 Timed Reminder Timed Reminder—Alarm Ringing...
Page 115
2.8 [2] System PC Programming Manual 115 Feature Manual References 1.17.3 Timed Reminder Unattended Conference—Recall Start Timer Specifies the length of time until the conference originator receives an Unattended Conference Recall tone. Default 10 min Value Range 0–60 min Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.3.13 Conference Unattended Conference—Warning Tone Start Timer Specifies the length of time until the parties...
Page 116
2.8 [2] System 116 PC Programming Manual Unattended Conference—Disconnect Timer Specifies the length of time until an Unattended Conference is disconnected after the parties involved in the conference receive a warning tone but the conference originator does not return to the conference. Default 15 s Value Range 0–240 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.3.13 Conference Miscellaneous Caller ID—Waiting to receive...
Page 117
2.8 [2] System PC Programming Manual 117 Caller ID—Visual Caller ID Display Specifies the length of time that a Caller ID number, with the Call Waiting tone offered by an analog line from the telephone company, is shown on the display. The Caller ID number flashes on the display for five seconds, followed by a 10-second pause, then flashes again for five seconds. Default 30 s Value Range 0–250 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual...
Page 118
2.8 [2] System 118 PC Programming Manual Default 30 s Value Range 10 × n (n=1–15) s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.5.9 External Sensor PT Display—PT Last Display Duration in Idle Mode Specifies the length of time that the current information remains on the display after the extension returns to idle status. Default 5 s Value Range 1–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual...
Page 119
2.8 [2] System PC Programming Manual 119 Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.19.3 Voice Mail (VM) Group During Conversation—DTMF Signal Length Specifies the length of time that a DTMF signal is sent when a number is dialed from a PT or PS during a conversation. Default 160 ms Value Range 80 ms, 160 ms, 240 ms, 320 ms Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature...
Page 120
2.8 [2] System 120 PC Programming Manual During Conversation—Pause Signal Time Specifies the length of the pause inserted when the PAUSE button is pressed during a conversation. Default 1.5 s Value Range 1.5 s, 2.5 s, 3.5 s, 4.5 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.13.4 Pause Insertion System Wireless—PS Out of Range Timer *) If 0 is set, timer is controlled by cell station. When the destination of an incoming call is...