Panasonic Kx Taw848 PC Cprogramming Manual
Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 41
2.5 Utility PC Programming Manual 41 2.5 Utility 2.5.1 Utility—Diagnosis Performs diagnostic tests on cards installed in the PBX, to identify the source of problems. If any of the tests listed here returns the result NG (No Good), contact your dealer. Test results can be saved as a TXT-format (text) file. When testing is complete, any cards that were set to OUS status must be returned to INS status if they are to be used again. Card Test Tests the relevant functions of a card to ensure that it is...
Page 42
2.5 Utility 42 PC Programming Manual Click Capture if you want to save the displayed information. 1.Enter a file name, or select a file to overwrite. 2.Click Save. Click Cancel to return to the Diagnosis screen. 2.5.2 Utility—File Transfer PC to PBX (SD Card) Copies PBX system files (program files and data files) from the connected PC to the SD memory card installed in the PBX. Pre-existing files on the SD memory card are overwritten. This option is only available at Installer level. Two types of...
Page 43
2.5 Utility PC Programming Manual 43 Language Data Default Value Data To transfer files to the SD memory card 1.From the Utility menu, select File Transfer PC to PBX (SD Card). The dialog box will be displayed. 2.Select the file to upload. A window showing the upload progress will be displayed. While transferring files to the SD memory card, the PBX automatically renames them according to the header information. A message will be displayed when the transfer is complete. 3.Click OK. 2.5.3 Utility—File...
Page 44
2.5 Utility 44 PC Programming Manual Downloading the DSSYS system data file allows you to make a backup of the configuration of the PBX. The error data files are snapshots of the configuration of the PBX taken automatically when a major error causes a system reset. They can be analysed by your dealer to identify the source of a problem. If there is only one error data file, its name will be $SYSERR. If there is more than one file, the files will be numbered in chronological order, up to a maximum of...
Page 45
2.5 Utility PC Programming Manual 45 Select ALL. All matching CSIF cards currently in INS status are displayed When one is selected, all related CS por ts currently in OUS status are displayed in the drop- down list directly below. 5.Click View to update the displayed header information of the selected files. The file with the higher File Version and File Revision numbers is newer. 6.Click Load to update the file stored on the PBX. When the update is finished, a message will be displayed. 7.Click...
Page 46
2.5 Utility 46 PC Programming Manual 2.5.7 Utility—Message File Transfer PBX to PC Transfers Outgoing Message (OGM) files from the MSG card to the PC. This option is only available at Installer level, and requires that at least 1 MSG card is installed. The MSG card must be set to OUS status. To transfer OGMs to the PC 1.From the Utility menu, select Message File Transfer PBX to PC. 2.From the upper drop-down list, select the target MSG card. 3.From the lower drop-down list, select the messages to...
Page 47
2.5 Utility PC Programming Manual 47 Note For a list of common errors and solutions, see 4.1.5 Troubleshooting by Error Log in the Installation Manual. To view the error log From the Utility menu, select Error Log. 2.5.9 Utility—CS Information Displays information stored by the PBX regarding each Cell Station (CS). This option is only available at Installer level, and requires that the target HLC card be set to INS status. The displayed items are as follows: TimeThe time of the error detection. Error...
Page 48
2.5 Utility 48 PC Programming Manual To view CS information 1.From the Utility menu, select CS Information. 2.From the Target CSI/F Slot No drop-down list, select the target slot. To display information on a single card, select the slot number and name of that card. To display information on all matching cards, select ALL. 3.From the Interval Timer drop-down list, select the number of seconds between each automatic screen refresh. 4.Click Start to begin monitoring. Monitoring will be performed and...
Page 49
2.5 Utility PC Programming Manual 49 When new DSSYS and PSMPR files are transferred from a connected PC to the SD memory card using the File Transfer PC to PBX (SD Card) utility (see 2.5.2 Utility—File Transfer PC to PBX (SD Card)), they are stored as the backup files. To use these files on the PBX, it is necessary to first swap them with the currently active files on the SD memory card. Requirements This utility only functions on PBXs version 1.005 and later. On earlier versions, the reset...
Page 50
2.6 Help 50 PC Programming Manual 2.6 Help 2.6.1 Frequently Asked Questions (FAQ) This section provides answers to some common questions about using the Maintenance Console software to program the PBX. The information is divided into the following topics: Connection TitleDescription ConnectionConnecting to the PBX using Maintenance Console. Maintenance Console SoftwareUsing the Maintenance Console software. Card StatusChanging the status (INS/OUS) of cards. Portable StationsSetting up portable stations,...