Home > Panasonic > Wireless PBX > Panasonic Kx Taw848 PC Cprogramming Manual

Panasonic Kx Taw848 PC Cprogramming Manual

Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.

Page 51

2.6 Help
PC Programming Manual 51
Maintenance Console Software
Card Status
Portable Stations
QCan I perform initial setup of the PBX without being connected to the PBX?
A Yes. This is possible in Batch mode. 
Create a new system data file using 2.2.1 File—New, edit settings as required, and then 
upload this file to the PBX later (see 2.5.2 Utility—File Transfer PC to PBX (SD Card)).
QHow do I confirm the software version of the PBX or installed cards?
AFrom 2.7.1 [1-1] Slot, click Summary. Summary...

Page 52

2.6 Help
52 PC Programming Manual
Numbering
A Is the status of the HLC card or preinstalled Hybrid ports set to INS?
 Is a CS connected to the HLC card or preinstalled Hybrid ports? If not, connect one.
 Do the PINs (Personal Identification Numbers) of the PBX and the Portable Station 
match? Confirm that they are the same.
 Is the Portable Station within transmission range of the CS?
 Has the Portable Station previously been registered at another location? 
It is not possible to register a Por...

Page 53

2.6 Help
PC Programming Manual 53
QHow do I change the extension numbering plan from 3-digit numbers to 4-digit 
numbers?
A Perform the following steps:
1.Open the 2.8.8 [2-6-1] Numbering Plan—Main screen.
2.Enter a 2-digit number in Leading Number, or change No. of Additional Digits 
from x to xx. 
For more details, see What is the procedure to modify the Numbering Plan?.
QHow do I set a 3-digit numbering plan?
A There are 2 methods of creating a 3-digit numbering plan, using 2.8.8 [2-6-1] 
Numbering...

Page 54

2.6 Help
54 PC Programming Manual
A It is not possible to use the same Leading Number for 2 extension blocks, or to use a 
number that could possibly overlap with another Leading Number.
 
So, for example, if 2 is already set as a Leading Number it is not possible to set 21 as 
another Leading Number because of the possible overlap of extension numbers.
 
The number you are trying to store cannot be used if it is already being used by:
 A feature number
 Another extension block
 Quick Dialing (see...

Page 55

2.6 Help
PC Programming Manual 55
Saving Modified Data
A Change New Card Installation—Automatic Extension Number Set for Extension 
Card in the 2.7.13 [1-3] Option screen from Automatic to Manual.
QModified settings have not been updated in the PBX.
AClick Apply or OK in the sub-menu screen.
QModified settings are not saved even when I press the Apply button.
A To save the system data files, choose Save from the File menu.
QIf I reset the PBX directly after modifying settings, the modified settings...

Page 56

2.6 Help
56 PC Programming Manual
Setting Features
A The following setting data is not saved to the SD memory card, so will be deleted when 
the PBX is initialized. This data is stored in the PBXs battery backup memory.
 Incoming Call Log
 Outgoing Call Log (including Last Number Redial)
 Message Waiting
SMDR
 PBX date and time
 Timed Reminder
 Daily test start time
 PT handset/headset volume
PT SP-PHONE volume
 PT ring volume
 PT display contrast
 ICD Group login status
(All extensions are...

Page 57

2.6 Help
PC Programming Manual 57
QI have set the type of an extension port to DSS Console, but I cannot apply 
this setting. (Error E000402)
A The number entered in DPT Type—Location No. (for Hybrid port) on the 2.7.4 [1-1] 
Slot—Extension Port screen is the same as that entered for another DSS Console. 
Change this so that the numbers do not overlap.
QI have set the type of an extension port to VM (DPT), but I cannot apply this 
setting. (Error E000403)
AThe DPT Type—VM Unit No. (for Hybrid port) and...

Page 58

2.6 Help
58 PC Programming Manual
A Perform the following steps:
1.On the 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings screen, 
enter the floating extension number you chose for the ICD group in the Floating 
Extension Number cell.
2.Click Apply.
3.On the 2.9.11 [3-5-4] Incoming Call Distribution Group—Member screen, select 
the ICD group you created from the Incoming Call Distribution drop-down list.
4.Enter the extension numbers of member extensions in the Extension No. column....

Page 59

2.7 [1] Configuration
PC Programming Manual 59
2.7 [1] Configuration
2.7.1 [1-1] Slot
The operating characteristics associated with each service card can be programmed. 
Move the mouse pointer over an installed card to display the menu of options for that card. To view a 
summary of status and MPR versions for all cards installed in the PBX, click the Summary button 
(see 
2.7.2 [1-1] Slot—Summary).
To install a new card to the PBX
1.Click on the name of the card to install in the list on the right. 
An...

Page 60

2.7 [1] Configuration
60 PC Programming Manual
Card Type
Indicates the type of service card that can be installed to the PBX.
Default
 
Slot 00: MPR (Main Processing Card: fixed) 
Slot 01: HLC4 (Hybrid ports: fixed) 
Slot 02: LCOT4 (4-Port Analog CO Line Card: installed by default) 
Other slots: Not stored.
Value Range
Card Type:
HLC4: 4-Port Hybrid Extension Card
PLC4: 4-Port Proprietary Extension Card
PLC8: 8-Port Proprietary Extension Card
SLC8: 8-Port Single Line Telephone Extension Card
LCOT4:...
Start reading Panasonic Kx Taw848 PC Cprogramming Manual

Related Manuals for Panasonic Kx Taw848 PC Cprogramming Manual

All Panasonic manuals