Panasonic Kx Taw848 PC Cprogramming Manual
Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
2.8 [2] System
PC Programming Manual 101
Value Range
External BGM, Internal BGM 1, Internal BGM 2
Maintenance Console Location
2.8.3 [2-2] Operator & BGM
Programming Manual References
None
Feature Manual References
1.2.1 BGM (Background Music)
BGM and Music on Hold—Music on Hold
Selects the audio source for Music on Hold.
Default
BGM
Value Range
To n e , B G M
Maintenance Console Location
2.8.3 [2-2] Operator & BGM
Programming Manual References
None
Feature Manual References
1.11.4 Music on Hold
BGM and...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-100.png "Page 101
2.8 [2] System
PC Programming Manual 101
Value Range
External BGM, Internal BGM 1, Internal BGM 2
Maintenance Console Location
2.8.3 [2-2] Operator & BGM
Programming Manual References
None
Feature Manual References
1.2.1 BGM (Background Music)
BGM and Music on Hold—Music on Hold
Selects the audio source for Music on Hold.
Default
BGM
Value Range
To n e , B G M
Maintenance Console Location
2.8.3 [2-2] Operator & BGM
Programming Manual References
None
Feature Manual References
1.11.4 Music on Hold
BGM and...")
2.8 [2] System PC Programming Manual 101 Value Range External BGM, Internal BGM 1, Internal BGM 2 Maintenance Console Location 2.8.3 [2-2] Operator & BGM Programming Manual References None Feature Manual References 1.2.1 BGM (Background Music) BGM and Music on Hold—Music on Hold Selects the audio source for Music on Hold. Default BGM Value Range To n e , B G M Maintenance Console Location 2.8.3 [2-2] Operator & BGM Programming Manual References None Feature Manual References 1.11.4 Music on Hold BGM and...
Page 102
![Page 102
2.8 [2] System
102 PC Programming Manual
Feature Manual References
1.3.8 Call Transfer
2.8.4 [2-3] Timers & Counters
Various system timers and counters can be programmed.
Dial / IRNA / Recall / Tone
Dial—Hot Line (Pickup Dial) Start
Specifies the length of time between going off-hook and the start of automatic dialing when the Hot
Line feature is set.
Default
1 s
Value Range
0–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-101.png "Page 102
2.8 [2] System
102 PC Programming Manual
Feature Manual References
1.3.8 Call Transfer
2.8.4 [2-3] Timers & Counters
Various system timers and counters can be programmed.
Dial / IRNA / Recall / Tone
Dial—Hot Line (Pickup Dial) Start
Specifies the length of time between going off-hook and the start of automatic dialing when the Hot
Line feature is set.
Default
1 s
Value Range
0–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References...")
2.8 [2] System 102 PC Programming Manual Feature Manual References 1.3.8 Call Transfer 2.8.4 [2-3] Timers & Counters Various system timers and counters can be programmed. Dial / IRNA / Recall / Tone Dial—Hot Line (Pickup Dial) Start Specifies the length of time between going off-hook and the start of automatic dialing when the Hot Line feature is set. Default 1 s Value Range 0–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References...
Page 103
![Page 103
2.8 [2] System
PC Programming Manual 103
Feature Manual References
1.1.5 Automatic Extension Release
Dial—Extension Inter-digit
Specifies the length of time within which subsequent digits must be dialed before the PBX sends a
reorder tone.
Default
10 s
Value Range
0–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.1.5 Automatic Extension Release
Dial—Analog CO First Digit
Specifies the length of time within which the first...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-102.png "Page 103
2.8 [2] System
PC Programming Manual 103
Feature Manual References
1.1.5 Automatic Extension Release
Dial—Extension Inter-digit
Specifies the length of time within which subsequent digits must be dialed before the PBX sends a
reorder tone.
Default
10 s
Value Range
0–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.1.5 Automatic Extension Release
Dial—Analog CO First Digit
Specifies the length of time within which the first...")
2.8 [2] System PC Programming Manual 103 Feature Manual References 1.1.5 Automatic Extension Release Dial—Extension Inter-digit Specifies the length of time within which subsequent digits must be dialed before the PBX sends a reorder tone. Default 10 s Value Range 0–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.1.5 Automatic Extension Release Dial—Analog CO First Digit Specifies the length of time within which the first...
Page 104
![Page 104
2.8 [2] System
104 PC Programming Manual
Dial—Analog CO Inter-digit
Specifies the length of time within which subsequent digits of a telephone number must be sent to an
analog CO line. If no digit is sent before this time expires, the PBX recognizes end of dialing and stops
muting the callers voice over the analog CO line.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Dial—Analog CO Call...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-103.png "Page 104
2.8 [2] System
104 PC Programming Manual
Dial—Analog CO Inter-digit
Specifies the length of time within which subsequent digits of a telephone number must be sent to an
analog CO line. If no digit is sent before this time expires, the PBX recognizes end of dialing and stops
muting the callers voice over the analog CO line.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Dial—Analog CO Call...")
2.8 [2] System 104 PC Programming Manual Dial—Analog CO Inter-digit Specifies the length of time within which subsequent digits of a telephone number must be sent to an analog CO line. If no digit is sent before this time expires, the PBX recognizes end of dialing and stops muting the callers voice over the analog CO line. Default 5 s Value Range 1–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References None Dial—Analog CO Call...
Page 105
![Page 105
2.8 [2] System
PC Programming Manual 105
Value Range
1–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.9.9 Intercept Routing
Recall—Hold Recall
Specifies the length of time until the holding extension receives a Hold Recall ring or alarm tone when
a held call remains unretrieved.
Default
60 s
Value Range
0 (disable the Hold Recall)–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-104.png "Page 105
2.8 [2] System
PC Programming Manual 105
Value Range
1–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.9.9 Intercept Routing
Recall—Hold Recall
Specifies the length of time until the holding extension receives a Hold Recall ring or alarm tone when
a held call remains unretrieved.
Default
60 s
Value Range
0 (disable the Hold Recall)–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual...")
2.8 [2] System PC Programming Manual 105 Value Range 1–240 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.9.9 Intercept Routing Recall—Hold Recall Specifies the length of time until the holding extension receives a Hold Recall ring or alarm tone when a held call remains unretrieved. Default 60 s Value Range 0 (disable the Hold Recall)–240 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual...
Page 106
![Page 106
2.8 [2] System
106 PC Programming Manual
2.10.8 [4-2-1] Portable Station—Extension Settings
Feature Manual References
1.3.8 Call Transfer
Recall—Call Park Recall
Specifies the length of time that a parked call waits to be retrieved, before the Transfer Recall
destination assigned to the extension that parked the call hears a Call Park Recall ring.
Default
60 s
Value Range
1–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.10.1 [4-1-1] Wired...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-105.png "Page 106
2.8 [2] System
106 PC Programming Manual
2.10.8 [4-2-1] Portable Station—Extension Settings
Feature Manual References
1.3.8 Call Transfer
Recall—Call Park Recall
Specifies the length of time that a parked call waits to be retrieved, before the Transfer Recall
destination assigned to the extension that parked the call hears a Call Park Recall ring.
Default
60 s
Value Range
1–240 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.10.1 [4-1-1] Wired...")
2.8 [2] System 106 PC Programming Manual 2.10.8 [4-2-1] Portable Station—Extension Settings Feature Manual References 1.3.8 Call Transfer Recall—Call Park Recall Specifies the length of time that a parked call waits to be retrieved, before the Transfer Recall destination assigned to the extension that parked the call hears a Call Park Recall ring. Default 60 s Value Range 1–240 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.10.1 [4-1-1] Wired...
Page 107
![Page 107
2.8 [2] System
PC Programming Manual 107
Tone Length—Busy Tone / DND Tone
Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in
busy status or DND mode. A reorder tone will be sent when this timer expires. (For a call through
DISA, the call will be disconnected when this timer expires.)
Default
10 s
Value Range
0 (continuous)–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.4.8 DND...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-106.png "Page 107
2.8 [2] System
PC Programming Manual 107
Tone Length—Busy Tone / DND Tone
Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in
busy status or DND mode. A reorder tone will be sent when this timer expires. (For a call through
DISA, the call will be disconnected when this timer expires.)
Default
10 s
Value Range
0 (continuous)–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.4.8 DND...")
2.8 [2] System PC Programming Manual 107 Tone Length—Busy Tone / DND Tone Specifies the length of time that a busy/DND tone is heard when a call is made to an extension in busy status or DND mode. A reorder tone will be sent when this timer expires. (For a call through DISA, the call will be disconnected when this timer expires.) Default 10 s Value Range 0 (continuous)–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.4.8 DND...
Page 108
![Page 108
2.8 [2] System
108 PC Programming Manual
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.1.5 Automatic Extension Release
1.8.2 Hands-free Operation
DISA / Door / Reminder / U. Conf
DISA—Delayed Answer Timer
Specifies the length of time that the caller hears a ringback tone before hearing an OGM.
Default
5 s
Value Range
0–30 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-107.png "Page 108
2.8 [2] System
108 PC Programming Manual
Value Range
1–15 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
1.1.5 Automatic Extension Release
1.8.2 Hands-free Operation
DISA / Door / Reminder / U. Conf
DISA—Delayed Answer Timer
Specifies the length of time that the caller hears a ringback tone before hearing an OGM.
Default
5 s
Value Range
0–30 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual...")
2.8 [2] System 108 PC Programming Manual Value Range 1–15 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References None Feature Manual References 1.1.5 Automatic Extension Release 1.8.2 Hands-free Operation DISA / Door / Reminder / U. Conf DISA—Delayed Answer Timer Specifies the length of time that the caller hears a ringback tone before hearing an OGM. Default 5 s Value Range 0–30 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual...
Page 109
![Page 109
2.8 [2] System
PC Programming Manual 109
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
DISA—No Dial Intercept Timer
Specifies the length of time after the OGM finishes playing in which the caller must begin dialing
before the call is redirected to the operator.
Default
10 s
Value Range
0–120 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.8.3 [2-2] Operator & BGM...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-108.png "Page 109
2.8 [2] System
PC Programming Manual 109
Programming Manual References
2.11.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
1.4.6 DISA (Direct Inward System Access)
DISA—No Dial Intercept Timer
Specifies the length of time after the OGM finishes playing in which the caller must begin dialing
before the call is redirected to the operator.
Default
10 s
Value Range
0–120 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.8.3 [2-2] Operator & BGM...")
2.8 [2] System PC Programming Manual 109 Programming Manual References 2.11.4 [5-3-2] Voice Message—DISA Message Feature Manual References 1.4.6 DISA (Direct Inward System Access) DISA—No Dial Intercept Timer Specifies the length of time after the OGM finishes playing in which the caller must begin dialing before the call is redirected to the operator. Default 10 s Value Range 0–120 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.8.3 [2-2] Operator & BGM...
Page 110
![Page 110
2.8 [2] System
110 PC Programming Manual
DISA—Intercept Timer—Day, Lunch, Break, Night
Specifies the length of time until an unanswered DISA call is intercepted and redirected to the
intercept routing destination after the original destination receives the call in each time mode.
Default
40 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept—Intercept Destination—Day, Lunch, Break,
Night
2.10.1...](http://img.usermanuals.tech/thumb/58/64586/w300_kx-taw848_en_adv_pcprog_v3_om_d-109.png "Page 110
2.8 [2] System
110 PC Programming Manual
DISA—Intercept Timer—Day, Lunch, Break, Night
Specifies the length of time until an unanswered DISA call is intercepted and redirected to the
intercept routing destination after the original destination receives the call in each time mode.
Default
40 s
Value Range
0–60 s
Maintenance Console Location
2.8.4 [2-3] Timers & Counters
Programming Manual References
2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept—Intercept Destination—Day, Lunch, Break,
Night
2.10.1...")
2.8 [2] System 110 PC Programming Manual DISA—Intercept Timer—Day, Lunch, Break, Night Specifies the length of time until an unanswered DISA call is intercepted and redirected to the intercept routing destination after the original destination receives the call in each time mode. Default 40 s Value Range 0–60 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept—Intercept Destination—Day, Lunch, Break, Night 2.10.1...