Panasonic Kx Taw848 PC Cprogramming Manual
Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.
Page 121
2.8 [2] System PC Programming Manual 121 Value Range 1–600 s Maintenance Console Location 2.8.4 [2-3] Timers & Counters Programming Manual References 2.10.7 [4-1-6] Wired Extension—Simplified Voice Message 2.10.12 [4-2-4] Portable Station—Simplified Voice Message Feature Manual References 1.16.5 SVM (Simplified Voice Message) SVM—Dial Tone Continuous Time Specifies the length of time that dial tone 3 is heard after all messages stored by the SVM feature for an extension are finished playing. Default 5...
Page 122
2.8 [2] System 122 PC Programming Manual To program the time blocks of the currently displayed Time Table, including adding or deleting time blocks, click Time Setting. 2.8.6 [2-4] Week Table—Time Setting The start times of 4 different time blocks can be programmed for each day of the week, for the selected Time Table, as well as the start and end times of up to 3 break periods. 1. Day/Lunch/Night—Day1 Start, Lunch Start, Day2 Start, Night Start— Setting Enables the setting of the start time for each...
Page 123
2.8 [2] System PC Programming Manual 123 Programming Manual References None Feature Manual References 1.17.2 Tenant Service 1.17.4 Time Service 2. Break—Break 1–3 Start—Setting Enables the setting of the start time for each break period. Default Disable Value Range Disable, Enable Maintenance Console Location 2.8.6 [2-4] Week Table—Time Setting Programming Manual References None Feature Manual References 1.17.2 Tenant Service 1.17.4 Time Service 2. Break—Break 1–3 Start—Hour, Minute Specifies the start...
Page 124
2.8 [2] System 124 PC Programming Manual 2. Break—Break 1–3 End—Hour, Minute Specifies the end time for each break period. Times can only be set when 2. Break—Break 1–3 Start—Setting is set to Enable. Default 00:00 Value Range 00:00–23:59 Maintenance Console Location 2.8.6 [2-4] Week Table—Time Setting Programming Manual References None Feature Manual References 1.17.2 Tenant Service 1.17.4 Time Service 2.8.7 [2-5] Holiday Table A specific time mode (day, night, lunch, or break) can be selected for...
Page 125
2.8 [2] System PC Programming Manual 125 Holiday Table—Start Date—Month Specifies the month of the holiday start date. Default 1 Value Range 1–12 Maintenance Console Location 2.8.7 [2-5] Holiday Table Programming Manual References None Feature Manual References 1.17.4 Time Service Holiday Table—Start Date—Day Specifies the day of the holiday start date. Default 1 Value Range 1–31 Maintenance Console Location 2.8.7 [2-5] Holiday Table Programming Manual References None Feature Manual References 1.17.4...
Page 126
2.8 [2] System 126 PC Programming Manual Maintenance Console Location 2.8.7 [2-5] Holiday Table Programming Manual References None Feature Manual References 1.17.4 Time Service Holiday Table—End Date—Day Specifies the day of the holiday end date. Default 1 Value Range 1–31 Maintenance Console Location 2.8.7 [2-5] Holiday Table Programming Manual References None Feature Manual References 1.17.4 Time Service 2.8.8 [2-6-1] Numbering Plan—Main Details of the extension numbering schemes and feature access...
Page 127
2.8 [2] System PC Programming Manual 127 Extension Numbering Scheme 21: 5 Extension Numbering Scheme 22: 6 Extension Numbering Scheme 05–20, 23–64: Not stored. Value Range Max. 2 digits (consisting of 0–9) Maintenance Console Location 2.8.8 [2-6-1] Numbering Plan—Main Programming Manual References 2.9.9 [3-5-1] Incoming Call Distribution Group—Group Settings 2.9.15 [3-7-2] VM(DPT) Group—Unit Settings 2.9.18 [3-8-2] VM(DTMF) Group—Group Settings 2.10.1 [4-1-1] Wired Extension—Extension Settings 2.10.8...
Page 128
2.8 [2] System 128 PC Programming Manual Operator Call Specifies the feature number used to call the operator. Default 0 Value Range Max. 4 digits (consisting of 0–9, *, and #) Maintenance Console Location 2.8.8 [2-6-1] Numbering Plan—Main Programming Manual References 2.8.3 [2-2] Operator & BGM 2.12.6 [6-6] Tenant Feature Manual References 1.12.3 Operator Features Idle Line Access (Local Access) Specifies the feature number used to make a CO line call by Idle Line Access (selects an idle CO line...
Page 129
2.8 [2] System PC Programming Manual 129 Value Range Max. 4 digits (consisting of 0–9, *, and #) Maintenance Console Location 2.8.8 [2-6-1] Numbering Plan—Main Programming Manual References 2.15.1 [9-1] CO Line Settings Feature Manual References 1.3.11 CO Line Access Redial Specifies the feature number used to redial the last number dialed. Default # Value Range Max. 4 digits (consisting of 0–9, *, and #) Maintenance Console Location 2.8.8 [2-6-1] Numbering Plan—Main Programming Manual References None...
Page 130
2.8 [2] System 130 PC Programming Manual Feature Manual References 1.16.3 Speed Dialing, Personal 1.16.4 Speed Dialing, System Personal Speed Dialing - Programming Specifies the feature number used to program Personal Speed Dialing numbers at an extension. Default *30 Value Range Max. 4 digits (consisting of 0–9, *, and #) Maintenance Console Location 2.8.8 [2-6-1] Numbering Plan—Main Programming Manual References None Feature Manual References 1.16.3 Speed Dialing, Personal Doorphone Call Specifies the...