Home > Panasonic > Wireless PBX > Panasonic Kx Taw848 PC Cprogramming Manual

Panasonic Kx Taw848 PC Cprogramming Manual

Here you can view all the pages of manual Panasonic Kx Taw848 PC Cprogramming Manual. The Panasonic manuals for Wireless PBX are available online for free. You can easily download all the documents as PDF.

Page 161

2.8 [2] System
PC Programming Manual 161
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.5.3 Executive Busy Override
DND Override
Enables making a call to an extension in DND mode by entering the feature number.
Default
Disable
Value Range
Disable, Enable...

Page 162

2.8 [2] System
162 PC Programming Manual
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.3.4 Call Monitor
Programming & Manager
COS Name
Specifies the name of the COS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming...

Page 163

2.8 [2] System
PC Programming Manual 163
Feature Manual References
1.3.16 COS (Class of Service)
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Default
Enable-Group
Value Range
Disable: An extension cannot set call forwarding for any group. 
Enable-All: An extension can set call forwarding for all groups. 
Enable-Group: An extension can only set call forwarding for the group to which the extension belongs.
Maintenance Console Location
2.8.11 [2-7-1]...

Page 164

2.8 [2] System
164 PC Programming Manual
Manager
Specifies the authorization to use manager features.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
Feature Manual References
1.11.1 Manager Features
Time Service Switch
Enables manual switching of time modes.
Default
Disable
Value Range...

Page 165

2.8 [2] System
PC Programming Manual 165
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
None
Feature Manual References
1.3.16 COS (Class of Service)
Door Unlock
Enables using the door opener feature.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension...

Page 166

2.8 [2] System
166 PC Programming Manual
Programming Manual References
2.11.6 [5-4] External Relay
Feature Manual References
1.5.8 External Relay
Accept the Call from DISA
Enables reception of calls from DISA.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—COS
2.11.4 [5-3-2] Voice Message—DISA...

Page 167

2.8 [2] System
PC Programming Manual 167
Accept Wireless XDP Parallel Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Default
Allow
Value Range
Allow, Deny
Maintenance Console Location
2.8.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
Feature Manual References
1.20.3 Wireless XDP Parallel Mode
2.8.12 [2-7-2] Class of Service—External Call Block
Each COS can have different trunk groups available for making...

Page 168

2.8 [2] System
168 PC Programming Manual
2.8.13 [2-7-3] Class of Service—Internal Call Block
Internal Call Block determines the restrictions placed on making intercom calls. The extensions, 
incoming call distribution groups, and doorphones belonging to a certain COS can be programmed 
to not receive intercom calls from those belonging to a certain COS.
COS Number of the Extension Which Receive the Call from Other Extension 
1–64
Specifies the combinations of COS levels for which intercom calls are...

Page 169

2.8 [2] System
PC Programming Manual 169
Programming Manual References
2.15.1 [9-1] CO Line Settings—Trunk Group Number
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
1.15.2 Ring Tone Pattern Selection
2.8.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
Different ring tone patterns can be selected for incoming doorphone calls depending on the 
doorphone port that the calls...

Page 170

2.8 [2] System
170 PC Programming Manual
Extension—Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming intercom calls.
Default
Double
Value Range
Single, Double, Triple
Maintenance Console Location
2.8.16 [2-8-3] Ring Tone Patterns—Call from Others
Programming Manual References
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Ring Pattern Table
2.10.8 [4-2-1] Portable Station—Extension Settings—Main—Ring Pattern Table
Feature Manual References
None
Timed Reminder—Ring Tone...
Start reading Panasonic Kx Taw848 PC Cprogramming Manual

Related Manuals for Panasonic Kx Taw848 PC Cprogramming Manual

All Panasonic manuals