Panasonic Kx Ta824 Operating Manual

1.3 Telephone Features
Operating Manual 61
1.3.24 Call Retrieving from a TAM (Telephone Answering 
Machine)
Without leaving your desk, you can answer an incoming call that was received by a preprogrammed 
Telephone Answering Machine (TAM) extension from your phone.
1.3.25 Call Splitting
When talking to one party with another party on hold, you can switch between the 2 par ties.If you hear a reorder tone when trying to retrieve a call from a TAM, the dialed 
extension is not the TAM extension, or the TAM...

1.3 Telephone Features
62 Operating Manual
 This feature is not available for calls from doorphones or paging announcements.
Feature Manual References
 1.1.24 Call Splitting
Operating Manual References
 1.3.15 Call Hold
 1.3.16 Call Hold, Exclusive
PT
During a conversation
Press CO or 
INTERCOM. Press HOLD.
OR
Press HOLD.
(CO)
C.Tone
Talk to the 
other party.
C.Tone
Press CO or 
INTERCOM.
OR
(CO)
Talk to the 
original party.
Disregard this step if both 
parties are extensions.
Disregard this step if...

1.3 Telephone Features
Operating Manual 63
1.3.26 Call Transfer—To Extension
You can transfer incoming calls to another extension. Depending on the setting of your PBX, proprietary 
telephone (PT) users may also be able to transfer incoming outside (CO) line calls to another extension 
simply by pressing the corresponding Direct Station Selection (DSS) button (One-touch Transfer). 
To transfer
To transfer with a one-touch operation (One-touch Transfer)
Press DSS or dial 
extension number.
On-hook.
Talk....

1.3 Telephone Features
64 Operating Manual
1.3.27 Call Transfer—To Outside (CO) Line
 * You may have to enter the Call Hold feature number, 20, after pressing the Recall/
hookswitch on your single line telephone (SLT), depending on the SLT Hold Mode of your 
PBX. For more details, refer to 1.1.15 Call Hold in the Feature Manual.
 You can go on-hook before the destination extension answers the call. If the destination 
extension does not answer the call within a specified time period, you will hear an...

1.3 Telephone Features
Operating Manual 65
CO-to-CO Line Call Duration
The length of outside-to-outside (CO-to-CO) line calls may be limited through system 
programming.
Both the outside caller and the outside destination will hear a warning tone 15 seconds 
before a specified time limit. When the timer expires, the call is disconnected.
To return to the held call before the destination answers, press the TRANSFER button 
or corresponding CO/INTERCOM button.
 After transferring the call to an outside...

1.3 Telephone Features
66 Operating Manual
1.3.28 Call Waiting
During a conversation, you can be informed of a waiting call by a tone through the built-in speaker of your 
proprietary telephone (PT) or the handset of your single line telephone (SLT) (Default: Disable). You can 
answer the second call by disconnecting the current call or placing the current call on hold. 
To change the call waiting tone using your PT, refer to 3.1.2 Personal Feature Assignment—Call Waiting 
Tone Type Selection. 
To...

1.3 Telephone Features
Operating Manual 67
To hold the current call and then talk to the new party
 * You may have to enter the Call Hold feature number, 20, after pressing the Recall/
hookswitch on your SLT, depending on the SLT Hold Mode of your PBX. For more details, 
refer to 1.1.15 Call Hold in the Feature Manual.
 An SLT user cannot transfer a new call while holding the current call. To transfer the new 
call, first park the original call using the Call Park feature, then go on-hook and...

1.3 Telephone Features
68 Operating Manual
1.3.29 Call Waiting Caller ID
Programming Manual References
[PT Programming]
 [104] SLT Hold Mode
 [115] Extension Ring Tone Pattern
 [423] CO Line Ring Tone Pattern
[PC Programming]
 9.1.11 Detail [1-10]—Extension—Ring Tone Pattern, Single Line Telephone—Hold 
Mode
 9.2.2 Feature settings [2-2]—Call Waiting—intercom calls, Call Waiting—outside calls
 9.3.3 Detail [3-3]—Ring Tone Pattern
Feature Manual References
 1.1.15 Call Hold
 1.1.27 Call Waiting...

1.3 Telephone Features
Operating Manual 69
To disconnect the current call and then talk to the new party
To hold the current call and then talk to the new party
To return to the original party, repeat the operation.
 If you do not press the FLASH/RECALL button while the information is displayed 
(flashing), the caller information is automatically recorded in your personal area and the 
Caller ID Indication—Personal button lights if the call has been directed to your PT. A call 
directed to multiple...

1.3 Telephone Features
70 Operating Manual
1.3.30 Call Waiting from the Telephone Company
Your telephone company may also offer an optional call waiting service, which can inform you that you have 
another call on the same outside (CO) line. For more details, consult your telephone company.Programming Manual References
[PT Programming]
 [414-416] CO Line Mode—Day/Night/Lunch
 [900] Caller ID
 [908] Call Waiting Caller ID Time
 [913] Call Waiting Caller ID Assignment
 [914] Call Waiting Caller ID CAS...