Panasonic Kx Ta824 Operating Manual

1.3 Telephone Features
Operating Manual 91
1.3.46 Flash/Recall
You can disconnect the current call and make a call to another party without going on-hook.Programming Manual References
[PT Programming]
 [110] Flash/Recall Key Mode
 [418] Flash/Recall Time
[PC Programming]
 9.1.11 Detail [1-10]—Proprietary Telephone—Flash/Recall Key Mode
 9.3.3 Detail [3-3]—Flash/Recall Time
Feature Manual References
 1.1.56 External Feature Access (EFA)
Operating Manual References
 1.3.46 Flash/Recall
Programming...

1.3 Telephone Features
92 Operating Manual
1.3.47 Hands-free Answerback
To set/cancel
1.3.48 Hands-free Operation
You can set your proprietary telephone (PT) to answer incoming intercom calls 
without going off-hook. When an intercom call arrives, you will hear the caller 
talking without the phone ringing. 
 The AUTO ANS/MUTE button light shows the current status as follows:
Off: Not set
Red on: Set
 This feature is not available for incoming outside (CO) line calls and doorphone calls.
Feature Manual...

1.3 Telephone Features
Operating Manual 93
To switch from the handset to hands-free mode
To switch from hands-free mode to the handset
1.3.49 Headset Operation
Helpful hints for hands-free operation:
If it is difficult to hear the other partys voice:
Increase the volume using the Navigator Key or Volume Key.
If the other party has difficulty hearing you:
Decrease the volume.
If the other party reports that your voice echoes:
Use the telephone in a room that has curtains, carpeting or both.
If parts...

1.3 Telephone Features
94 Operating Manual
To talk using the headset
1.3.50 Hot Line
A single line telephone (SLT) user can make a call simply by going off-hook, if the telephone number has 
been stored beforehand.
This feature is also known as Pickup Dialing.
To store a phone number
To set/cancel
Feature Manual References
 1.1.64 Headset Operation
Press SP-PHONE.
PT
SLT
Enter #.On-hook.Off-hook.Dial desired
phone number
(max. 32 digits).
desired 
phone no.
Enter 74.
2
Enter 2.
47C.Tone   
Dial an...

1.3 Telephone Features
Operating Manual 95
To dial
1.3.51 Intercom Call
You can call another extension.To call another party, dial the desired partys phone number before the preprogrammed 
number is dialed. 
 Up to 32 digits including   can be stored. However, depending on your mode of account 
code entry,   may not be regarded as a pause.
 Rotary SLT users cannot program this feature.
Programming Manual References
[PT Programming]
 [203] Hot Line Waiting Time
[PC Programming]
 9.1.7 Timers...

1.3 Telephone Features
96 Operating Manual
1.3.52 Line Access, Outside (CO) Line—SUMMARY
There are 3 methods of seizing an outside (CO) line. Use whichever method you prefer, unless requested 
by your manager to use a specific method.
Choose one of the following methods:
Line Access, Automatic
Line Access, Outside (CO) Line Group
Line Access, S-CO LineFor quick operation
If you are the operator or dial certain extension numbers frequently, DSS buttons are 
useful.
Hands-free Operation
You can make an...

1.3 Telephone Features
Operating Manual 97
1.3.53 Line Access, Automatic
You can select an idle outside (CO) line automatically. You can also select an idle outside (CO) line from 
among the outside (CO) lines that are not assigned to Single-CO (S-CO) or Group-CO (G-CO) buttons (Line 
Access Using the Other-CO (O-CO) Button).To make a call to another party without going on-hook, press the FLASH/RECALL 
button. Pressing the button will re-access the outside (CO) line and provide an external 
dial tone....

1.3 Telephone Features
98 Operating Manual
To select an idle outside (CO) line automatically
To select an idle unassigned outside (CO) line
1.3.54 Line Access, Outside (CO) Line Group
You can select an idle outside (CO) line in the specified outside (CO) line group (1–8) automatically.Programming Manual References
[PT Programming]
 [206] Dialing Start Time
 [400] CO Line Connection
 [405-407] Flexible Outward Dialing—Day/Night/Lunch
 [419] Automatic Designated Line Access
[PC Programming]
 9.1.7...

1.3 Telephone Features
Operating Manual 99
1.3.55 Line Access, S-CO Line
You can select a specified outside (CO) line. You can press the G-CO button without going off-hook first.
Programming Manual References
[PT Programming]
 [206] Dialing Start Time
 [400] CO Line Connection
 [404] CO Line Group Number
 [405-407] Flexible Outward Dialing—Day/Night/Lunch
[PC Programming]
 9.1.7 Timers [1-6]—CO Dialing—Dialing Start Time
 9.3.2 Incoming / Outgoing [3-2]—Outgoing Call—Day, Night, Lunch
 9.3.3...

1.3 Telephone Features
100 Operating Manual
1.3.56 Live Call Screening (LCS) (Voice Mail APT Integration only)
Before operating
 Create a Live Call Screening (LCS) button.
 Select the mode, either Hands-free or Private.
 Set the LCS password.
 Set the LCS feature.Programming Manual References
[PT Programming]
 [206] Dialing Start Time
 [400] CO Line Connection
 [405-407] Flexible Outward Dialing—Day/Night/Lunch
[PC Programming]
 9.1.7 Timers [1-6]—CO Dialing—Dialing Start Time
 9.3.2 Incoming /...