Panasonic Kx Ta308 User Manual

Telephone Features3-27
3.2 Telephone FeaturesC
Logging the call information into the Personal Area
PT
Dial 7381#. Lift the handset or press 
SP-PHONE.Hang up or press 
SP-PHONE. Confirmation tone 
and dial tone
1387

P-Answer Log On
Logging the call information into the Common Area
Canceling logging the call information to restore the default*
2
PT
Dial 7382#. Lift the handset or press 
SP-PHONE.Hang up or press 
SP-PHONE. Confirmation tone 
and dial tone
2387

C-Answer Log On
PT
Dial 7380#. Lift the...

3-28Telephone Features
C3.2 Telephone Features
Confirming and calling back
Display Operation (— for the KX-TA30830)
When the Caller ID Indication — Personal button indicator is red,
there are new calls logged in the personal area. When the Caller ID
Indication — Common button indicator is red, there are new calls
logged in the common area.
1.Confirm the number of logged calls.
2.Press the Caller ID Indicationbutton to see the incoming call
information.
•The new information that you have not confirmed...

Telephone Features3-29
3.2 Telephone FeaturesC

If the information is stored in log 003,
— caller’s name
— caller’s number
— date and time 
•Only twelve digits (or characters) of caller’s number (or
name) can be displayed even though sixteen digits (or
characters) of information may have been received. To scroll
the display, press →(the FWD/DND button).
4.Confirm the displayed number and lift the handsetor press the
SP-PHONEbutton.
5.Press the Caller ID Indicationbutton.
•You may press a CO button first...

3-30Telephone Features
C3.2 Telephone Features
Confirming the number of logged calls
PT
Press Caller ID Selection — Personal button while on-hook.
— In the Personal Area
Press Caller ID Selection — Common button while on-hook.
— In the Common Area
Conditions
• When “Disregarding the 21st call in the personal area” has been set and 20 calls are
logged or all of the old information has been overwritten in the personal area, the
Caller ID Selection — Personal button indicator lights and informs you that no...

Telephone Features3-31
3.2 Telephone FeaturesC
Programming References
•Station Programming (Section 2)
Flexible Button Assignment — Caller ID Indication Button
Caller ID Selection Button
•System Programming — Installation Manual
[900] Caller ID Assignment
[901] Caller ID Area Code Assignment
[902] Caller ID Modification for Local Calls
[903] Caller ID Modification for Long Distance Calls
[904] Caller ID Log Priority Selection
[909] Common Area Call Log Check Assignment
Feature References
Call Log Lock,...

3-32Telephone Features
C3.2 Telephone Features
Call Log Lock, Incoming in the Personal Area
Allows you to lock the display of your extension so that the “Call Log, Incoming” feature
is not shown on the display when you press the Caller ID Indication — Personal button,
if you do not want others to see the information stored in the personal area. This feature
also works as Electronic Station Lockout.
Locking
PT
Lift the handset 
or press SP-PHONE.Dial 77. Hang up or press 
SP-PHONE.Enter a 4-digit lock...

Telephone Features3-33
3.2 Telephone FeaturesC
Call Park
Allows you to place a held call into a system parking area so that you can perform other
tasks. The parked call can be retrieved by any extension user. Up to ten calls can be
parked.
PT and SLT
For a PT: Press HOLD.
For an SLT: Flash the hookswitch.Dial 22. Confirmation tone 
and dial tone Confirmation tone 
and dial toneEnter a parking zone number 
(0 through 9).
parking zone no.
During a conversation
For an SLT For a PT22
HOLD

Parking zone...

3-34Telephone Features
C3.2 Telephone Features
Conditions
•If a parked call is not retrieved within a pre-determined time (default: 30 seconds),
“Hold Alarm/Hold  Recall” occurs.
•If a parked call is not retrieved within thirty minutes, it will be automatically
disconnected.
•This feature is useful when you want to hold more than one intercom call with a PT, or
more than one intercom or outside call with an SLT.
Programming Reference
•System Programming — Installation Manual
[200] Hold Recall Time...

Telephone Features3-35
3.2 Telephone FeaturesC
Conditions
•Doorphone calls can be picked up from extensions that are not programmed to answer
doorphone calls.
•You can hear a confirmation tone when the call is picked up. The tone can be disabled.
•If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone.
Programming Reference
•System Programming — Installation Manual
[117] Call Pickup Tone
Feature References
Call Pickup Deny
Doorphone Call
Call Pickup, Directed
Allows you to...

3-36Telephone Features
C3.2 Telephone Features
Conditions
•You can pick up an incoming outside, intercom or doorphone call, but you cannot
pickup a Camp-On recall and hold recall.
•You can hear a confirmation tone when the call is picked up. The tone can be disabled.
•If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone.
Programming References
•System Programming — Installation Manual
[117] Call Pickup Tone
[600] Extension Group Assignment
Feature References
Call Pickup...