Panasonic Kx Ta308 User Manual

Station Programming (Personal Programming)2-3
2.1 Station Programming Instructions
To confirm the assigned data
—Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press HOLD. Enter the program access number.
program access numberHOLD
— To exit the Station Programming mode, press the PROGRAM button.
— If you wish to change the data, follow the programming procedure explained in this
section.
* A program access numberis required to program/confirm the data by Station...

2-4Station Programming (Personal Programming)
2.1 Station Programming Instructions
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
— The following outline contains the buttons and program access numbers used for Station
Programming. Detailed operating instructions are explained in this section.— To exit the Station Programming mode, press the PROGRAM...

(Preferred Line Assignment — Outgoing)
(Preferred Line Assignment — Incoming)
(Outside (CO) Line Ringing Selection)
(Intercom Alert Assignment)
(Call Waiting Tone Type Assignment)
(Self-Extension Number Confirmation)
(Extension Password Set)*
(Electronic Station Lockout — CANCEL ALL)*
(Date and Time Setting)*
(Station Programming Data Default Set)
(Exit) Direct Station Selection (DSS) Button
Conference (CONF) Button
FWD/DND Button
SAVE Button
Caller ID Indication — Personal Button
Caller ID Selection —...

Call Waiting Tone Type Assignment
Allows you to select the call waiting tone type (Tone 1 or Tone 2).
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Conditions
• The tone type patterns are described in the Appendix (Section 4).
• The default is “Tone 1”.
Feature References
Busy Station Signaling (BSS)
Call Waiting
PT
Dial 5.Press STORE.
or
Dial 1 or 2.
1 : to select Call Waiting Tone 1
2 : to select Call...

Station Programming (Personal Programming)2-7
2.2 Station Programming (Personal Programming)
Flexible Button Assignment
Each Flexible button on your telephone and the console can be assigned as various
feature buttons such as a DSS Button, FWD/DND Button, etc. The assignable features
are limited by the button type. Please refer to “Flexible Buttons” in Section 1.1.
Another Extension Message Waiting Button (Assignment)
Allows you to assign a Flexible CO button as an Another Extension Message Waiting...

2-8Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Caller ID Indication Button (Assignment)
Allows you to assign a Flexible CO button as the Caller ID Indication button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible CO button you wish to 
assign as the Caller ID Indication — Personal button.Dial 6.Press STORE.
–– Personal
Press the desired Flexible CO button you wish to 
assign as the Caller ID...

Station Programming (Personal Programming)2-9
2.2 Station Programming (Personal Programming)
Caller ID Selection Button (Assignment)
Allows you to assign a Flexible CO button as the Caller ID Selection button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Condition
•System Programming determines who can assign the Caller ID Selection — Common
button.
Programming Reference
•System Programming —...

2-10Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
— To exit the Station Programming mode, press the PROGRAM button.
Feature References
Conference
Conference, Unattended
PT
Press the desired Flexible CO 
button you wish to assign as 
the Conference button.Dial 3.Press STORE.
3COAUTO DIAL
STORE

Conference
•The STORE indicator lights.
•The display shows the initial programming mode.
Conference (CONF) Button (Assignment)
Allows you to assign a Flexible CO button...

Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible CO button as a DSS button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
Station Programming (Personal Programming)2-11
2.2 Station Programming (Personal Programming)
— To exit the Station Programming mode, press the PROGRAM button.
Feature Reference
Intercom Calling
PT
Press the desired Flexible CO
button you wish to assign as 
a DSS button.Dial 1.
Press STORE. Enter the extension...

2-12Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
FWD/DND Button (Assignment)
Allows you to assign a Flexible CO button as the FWD/DND button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible CO 
button you wish to assign as 
the FWD/DND button.Dial 4.Press STORE.
4COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming
mode.
FWD/DND
— To exit the Station...