Panasonic Kx Ta308 User Manual

Press the desired Flexible CO 
button you wish to assign as 
the Log-In/Log-Out button.Dial 8.Press STORE.
8COAUTO DIAL
STORE
Station Programming (Personal Programming)2-13
2.2 Station Programming (Personal Programming)
PT
•The STORE indicator lights.
•The display shows the initial programming mode.

Group Log In/Out
Log-In/Log-Out Button (Assignment)
Allows you to assign a Flexible CO button as the Log-In/Log-Out button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
—...

2-14Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible button (CO, MESSAGE) as a One-Touch Dialing button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible button you wish 
to assign as a One-Touch Dialing button and 
then dial 2.Press STORE. Enter the desired number 
(extension number, 
phone number, etc.).
desired number+
))...

Station Programming (Personal Programming)2-15
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible 
CO button you wish to assign 
as the O-CO button.Press STORE.
Dial    .
COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming
mode.
Other CO Key
— To exit the Station Programming mode, press the PROGRAM button.
Other-CO (O-CO) Button (Assignment)
Allows you to assign a Flexible CO button as the Other-CO button.
— Be sure that you are in the...

2-16Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
SAVE Button (Assignment)
Allows you to assign a Flexible CO button as the SAVE button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible CO 
button you wish to assign as 
the SAVE button.Dial 5.Press STORE.
5COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming mode.

Save Button
— To exit the Station Programming...

Station Programming (Personal Programming)2-17
2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Condition
•You can assign the same outside (CO) line to an S-CO and G-CO button.
PT
Press the desired Flexible 
CO button you wish to assign 
as an S-CO button.Dial...

2-18Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Intercom Alert Assignment
Allows you to select the alert mode (tone/voice) when receiving an intercom (extension)
call.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Dial 4.Press STORE.
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
124
AUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial...

Station Programming (Personal Programming)2-19
2.2 Station Programming (Personal Programming)
Outside (CO) Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at
your extension.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press STORE. Dial 3.
Enter the outside (CO) line numbers 
you want to ring (1 through 3).
outside (CO) line no.3
AUTO DIAL
STORE

RNG:1,2,3
— To exit the Station Programming mode, press...

2-20Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming outside calls from the
following three line preferences.
1.) No Line Preference
2.) Ringing Line Preference (— default)
3.) Prime Line Preference
Follow the corresponding programming procedure according to your selection.
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook. You must select...

Station Programming (Personal Programming)2-21
2.2 Station Programming (Personal Programming)
Ringing Line Preference — Incoming (Assignment)
When you go off-hook, you can answer any call ringing at your telephone.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button. — To exit the Station Programming mode, press the PROGRAM button.
Prime Line Preference — Incoming (Assignment)
When you go off-hook, you can...

2-22Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the
following three line preferences.
1.) No Line Preference (— default)
2.) Idle Line Preference
3.) Prime Line Preference
Follow the programming procedure according to your selection.

When setting “Idle Line Preference” or “Prime Line Preference”, you cannotaccess any
PT features after going...