Panasonic Kx Ta308 User Manual

Telephone Features3-77
3.2 Telephone FeaturesL
Conditions
• The default is “Log-In” mode.
• There should be at least one extension that is in Log-In mode.
• If every extension has logged out except one person, and that person tri\
es to log out,their extensions will display “Not Valid”. In other words, the last member of the group
cannot log out.
• The Log-In/Log-Out button can be assigned to a Flexible CO button.
Programming References
• Station Programming (Section 2) Flexible Button Assignment —...

3-78Telephone Features
M3.2 Telephone Features
Message Waiting
When the called extension is busy or does not answer your call, you can leave a
notification so that the called party may call you back.
As a message receiver, the lit Message/Ringer Lamp lets you know that a call has been
received. If you receive notification, you can call back the original party by a simple
operation. This operation is available only for proprietary telephones with MESSAGE
buttons.
Setting
Any Telephone
Dial 701.Enter the...

Telephone Features3-79
3.2 Telephone FeaturesM
PT
Press MESSAGE 
twice.Enter the extension number 
(100 through 199) where 
you left a message.
extension no.
Lift the handset or press 
SP-PHONE/MONITOR.Hang up or press 
SP-PHONE/MONITOR. Confirmation 
tone and 
dial tone
MESSAGEMESSAGE
Canceling using the MESSAGE button
Checking and Selecting a message notification by the message receiver
If there is a message, the Message/Ringer Lamp will light red.
PT
Press MESSAGE repeatedly until the desired message...

3-80Telephone Features
M3.2 Telephone Features
Clearing all message notifications by the message receiver
• All messages are cleared.
PT
Dial 700.Dial #. Lift the handset or press 
SP-PHONE/MONITOR.Hang up or press 
SP-PHONE/MONITOR.
007
Conditions
• If the Message/Ringer Lamp does not go out after calling the extension which left the
message, another message is waiting.
• If multiple message notifications are left at your extension, call back is executed in the
order received.
• If you select a specific...

Telephone Features3-81
3.2 Telephone FeaturesM
• If another extension has more than one message, the
line connects you to the selected message sender.• The message is cleared after
the conversation.
Calling back the message notification sender for another extension
PT
Press the Flexible CO button assigned as an 
Another Extension Message Waiting button.Lift the handset or press 
SP-PHONE/MONITOR.Talk.
PT
Press the Flexible CO button assigned as an Another Extension Message 
Waiting button repeatedly until...

3-82Telephone Features
M3.2 Telephone Features
Conditions
• If the Another Extension Message Waiting button indicator does not go out after calling
the extension which left the message, another message is waiting.
• If multiple message notifications are left at another extension, call back is executed in
the order received.
• If you select a specific message to call back, the other call backs will be executed in the
order received, starting with the one selected.
(ex.) 5 → 6 → 7 → 8 → 1 → 2 → 3 → 4
• The...

Telephone Features3-83
3.2 Telephone FeaturesM
Message Waiting for Another Extension Lock
Allows you to lock the Message Waiting for Another Extension feature so that another
extension cannot check messages left at your extension.
Locking
Any Telephone
Lift the handset or 
press SP-PHONE.Dial 70.Hang up or press 
SP-PHONE.Enter a 4-digit lock code 
(4000 through 9999) twice.Dial #.
lock codelock code
same code
Confirmation tone 
and dial tone.
07

Lock Code
Locked : xxxx
Unlocking
Any Telephone
Lift the...

3-84Telephone Features
M3.2 Telephone Features
Condition
• This feature is only available during a hands-free conversation.
Mixed Station Dialing
Any telephone, either a KX-TA30820/KX-TA30830/KX-TA30850, single line rotary
phone (10 pps, 20 pps) or single line touch tone telephone, may be used as an extension
for the system. PT
Microphone Mute 
(— for KX-TA30820/KX-TA30830 only)
Allows you to turn off the microphone so you can consult privately with others in the
room. You will still be able to hear the...

Telephone Features3-85
3.2 Telephone FeaturesO
Conditions
• The destination numbers are stored through Station Programming.
• You may press a CO button to select a desired outside (CO) line before pressing the
One-Touch Dialing button.
• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.
• You can store a number consisting of twenty-five digits or more by dividing and storing
it into two One-Touch Dialing buttons.
• The telephone number stored will be displayed on the LCD. Use...

3-86Telephone Features
O3.2 Telephone Features
Condition
• If an operator is not assigned, this feature is not available and you will hear a reorder
tone.
Programming Reference
• System Programming — Installation Manual
[008] Operator Assignment
Operator Call
Allows you to call an operator within the system. One extension can be assigned as an
operator.
Any Telephone
Dial 0.Lift the handset or press 
SP-PHONE/MONITOR.
0