Panasonic Kx Ta308 User Manual
Here you can view all the pages of manual Panasonic Kx Ta308 User Manual. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.
Page 121
Telephone Features3-67 3.2 Telephone FeaturesE Conditions • This feature does not work when “Data Line Security” or “Executive Busy Override Deny” is set at either or both of the other parties. • When a two-party call is changed to a three-party call or vice versa, a confirmation tone is sent to all parties. The tone can be disabled. Programming References • System Programming — Installation Manual [105] Conference Tone [608] Executive Busy Override Feature References Conference Data Line Security...
Page 122
3-68Telephone Features E3.2 Telephone Features Conditions •This feature does not work when “Data Line Security” or “Executive Busy Override Deny” is set at the extension engaged in the existing outside call. •When a two-party call is changed to a three-party call or vice versa, a confirmation tone is sent to all parties. The tone can be disabled. Programming References •System Programming — Installation Manual [105] Conference Tone [608] Executive Busy Override Feature References Conference Data Line...
Page 123
Telephone Features3-69 3.2 Telephone FeaturesE Programming Reference •System Programming — Installation Manual [608] Executive Busy Override Feature References Executive Busy Override — Extension Executive Busy Override — Outside (CO) Line Executive Busy Override Deny Allows you to prevent other extension users from interrupting your conversation. Setting / Canceling Any Telephone To set Deny: Dial 7330#. To set Allow: Dial 7331#. To set Deny. To set Allow. Lift the handset or press SP-PHONE/...
Page 124
3-70Telephone Features E3.2 Telephone Features Conditions •A“Flash Time” must be assigned as required by the host PBX, or outside (CO) line. •You may access some features of the host PBX using the FLASH/RECALL button. If the system is connected to a host PBX and the flash operation is required, follow the flash operation procedure which is required by the host PBX. Programming References •System Programming — Installation Manual [110] Flash Key Mode [418] Flash Time Feature Reference Flash PT PT External...
Page 125
Telephone Features3-71 3.2 Telephone FeaturesF Condition •System Programming may be required to perform this feature properly. Programming References •System Programming — Installation Manual [110] Flash Key Mode [418] Flash Time Feature Reference External Feature Access Flash Allows you to disconnect the current call and make another call without hanging up. PT Press FLASH/RECALL.Enter the phone number. phone no. While hearing any tone, dialing, or talking Dial tone FLASH/RECALL
Page 126
3-72Telephone Features H3.2 Telephone Features Conditions •This feature does not work for incoming outside calls or doorphone calls. •When an outside call is transferred to your extension, this feature is overridden and a ring tone is heard. PTPT Hands-free Answerback (— for KX-TA30820/KX-TA30830 only) Allows you to answer an intercom call without lifting the handset. Setting PT Press AUTO ANSWER/MUTE. When the SP-PHONE and the AUTO ANSWER/MUTE indicators are off AUTO ANS MUTE •The AUTO ANSWER/MUTE...
Page 127
Telephone Features3-73 3.2 Telephone FeaturesH Conditions •Helpful hints for the Hands-free operation: — Use this unit in a quiet room for best performance. — If you and the other party talk at the same time, parts of your conversation will be lost. To avoid this, talk alternately. •The hands-free mode is canceled if you do not start dialing within ten seconds. •The KX-TA30850 has a MONITOR button instead of a SP-PHONE button. It can be used for hands-free dialing, etc., but it cannot be used for a...
Page 128
3-74Telephone Features I3.2 Telephone Features Conditions •After dialing an extension number, you will hear one of the following tones. Ringback tone:Indicates the destination extension is being called. Confirmation tone:Indicates you can perform voice calling (e.g., Paging). Busy tone:Indicates the destination extension is busy. Do Not Disturb (DND) tone:Indicates the destination extension has set the “Do Not Disturb (DND)” feature. •An extension number and a name, if programmed, are shown on a display...
Page 129
Telephone Features3-75 3.2 Telephone FeaturesL Local Carrier-Based Voice Mail Service Allows you to receive an indication to notify you that a message is waiting from your telephone company’s voice mail service. After subscription, the voice mail system can answer calls automatically when you are busy or calls are not answered, and callers can leave their messages in your mailbox of the voice mail system located at the telephone company. The Message/Ringer Lamp will light red and an S-CO button will flash...
Page 130
3-76Telephone Features L3.2 Telephone Features Lockout If one party in a conversation goes on-hook, both parties will be disconnected from the speech path automatically. A reorder tone is sent to the off-hook party before it is disconnected. No operation is necessary. Log-In/Log-Out Allows you to assign the Log-In mode or Log-Out mode within a hunting or ring group. When in the Log-Out mode, you can leave the group temporarily, preventing hunting calls from being sent to your extension. The lighting...