Panasonic Kx Ta308 User Manual

Telephone Features3-47
3.2 Telephone FeaturesC
Conditions
•You can return to the original party by pressing the FLASH/RECALL button again.
•You can return to the original party by repeating the steps above.
•If “Hold-3” is assigned in System Programming, you must dial “20” after flashing the
hookswitch.
Programming References
System Programming — Installation Manual
[104] Hold Mode Selection
[110] Flash Key Mode
[418] Flash Time
Feature Reference
External Feature Access SLT
SLT
PT
Call Waiting from a...

3-48Telephone Features
C3.2 Telephone Features
Caller ID Call Waiting
During a conversation, a Call Waiting tone offered by your Central Office informs you
that there is a call waiting. If the Caller ID service provides you with a caller’s
information, such as the name and telephone number, the new caller’s information will be
displayed (flashing) on your extension (KX-TA30830 only) during the assigned time. You
can answer the second call by disconnecting the first call or placing it on hold.
To talk to...

Telephone Features3-49
3.2 Telephone FeaturesC
Conditions
• You can program the new caller information display timer. If you do not press the
FLASH/RECALL button while the information is displayed (flashing), the display
stops flashing. In this situation, the caller information is automatically recorded in your
personal area and your Caller ID Indication — Personal button indicator lights if the
call has been directed to your extension. A call directed to multiple extensions is
automatically recorded in...

3-50Telephone Features
C3.2 Telephone Features
Conference
During a two-party conversation, you can add a third party to make a three-party
conference. The members of a conference may be three extensions, one extension and
two outside (CO) lines, or two extensions and one outside (CO) line.
To establish a conference
SLT
Enter the phone 
number of the 
third party.Talk to the 
third party.
During a two-party conversation
Flash the 
hookswitch.Dial 3.Flash the 
hookswitch.
A three-party 
conference 
is now...

Telephone Features3-51
3.2 Telephone FeaturesC
To leave the conference
Any telephone
Hang up or press SP-PHONE.
•A conversation with the desired party is established and
the other party is disconnected.
To talk to the original party while holding the third party
To terminate one party and talk to the other
SLT
Talk to the original party.Flash the hookswitch.
PT
Talk. Press the CO or INTERCOM 
of the party to remain connected.
COINTERCOM
or
•The other two parties may continue their conversation.
•If the...

3-52Telephone Features
C3.2 Telephone Features
Conditions
• A conference call can also be established by “Executive Busy Override”\
.
• When a two-party call is changed to a three-party call or vice versa, a \
confirmationtone is sent to all parties. The tone can be disabled.
• Pressing a CO button which is not in the conference allows you to exit f\
rom the conference, leaving the other two parties connected unless they are both\
 outside (CO)
lines.
If the other parties are both outside (CO) lines,...

Telephone Features3-53
3.2 Telephone FeaturesC
Conditions
•System Programming is required to execute this feature.
•When an Unattended Conference is established, an alarm tone is sent to both outside
parties fifteen seconds before the assigned time limit (default: 10 minutes). “Hold
Recall” is activated at the extension that leaves the conference fifty seconds before the
time-out. The call is disconnected when the time-out expires unless the extension
returns to the conference.
•For example, if you are...

3-54Telephone Features
D3.2 Telephone Features
Feature References
Call Waiting
Executive Busy Override — Extension
Executive Busy Override — Outside (CO) Line
Hold Alarm/Hold Recall (→See the Installation Manual.)
Data Line Security
Your extension can be protected against interruptions from the “Call Waiting”, “Hold
Alarm/Hold Recall”, and “Executive Busy Override” features. Data communication
devices, such as computers and facsimiles, can operate uninterrupted.
Setting / Canceling
Any Telephone
To set:...

Telephone Features3-55
3.2 Telephone FeaturesD
Calling an extension
Any Telephone
Enter the DISA phone number.Ringback tone and 
one short beep
DISA phone no.extension no.
Enter the extension number.
Ring back tone
Enter the DISA 
phone number.Ringback tone
and one short 
beep
DISA phone no.extension no.
Enter the 
extension number.
DISA security code
Enter the pre-assigned
DISA security code.Ring back 
tone One short 
beep
In None Security Mode
In All Security Mode
Dial    .
•You can dial the AA number...

3-56Telephone Features
D3.2 Telephone Features
Any Telephone
Enter the DISA 
phone number.Ringback tone and 
one short beep
DISA phone no.line access code
Enter a line access code 
(9 or 81 through 83).
phone no.
Enter the phone number 
of the external party.
In None Security Mode
In Trunk Security Mode
In All Security Mode
Enter the DISA 
phone number.Ringback 
tone and 
one short 
beep
DISA 
phone no.line access 
code
Enter a 
line access code 
(9 or 81 through 83).
DISA security 
code
Enter the...