Panasonic Kx Ta308 User Manual

Telephone Features3-107
3.2 Telephone FeaturesR
Conditions
• The doorphone access tone can be disabled by System Programming.
• The access tone will not be sent to the monitored PT. The paging access tone will also not be sent to the monitored PT.
• System Programming is required for a PT to be monitored.
• This feature is not available for the KX-TA30850.
Programming References
• System Programming — Installation Manual [612] Room Monitor Assignment
[707] Doorphone Access Tone  Selection
PT
PT
PT...

3-108Telephone Features
S3.2 Telephone Features
Conditions
•A secret code, “[” or “]” (pressing the INTERCOM button), are counted as one digit.
•You can conceal one or more parts of a telephone number.
•If the phone number “9-1-[201]-431-2111” has been stored, the display will show the
following when the call is made.
•You can program whether to print out the concealed number(s) on the SMDR or not by
System Programming.
•Do not press the INTERCOM button before a line access number (9 or 81 through 83)....

Telephone Features3-109
3.2 Telephone FeaturesS
Station Feature Clear
Allows you to reset the following station features to the default settings.
a) Absent Message Capability
b) Automatic Callback Busy (Camp-On)
c) Background Music (BGM)
d) Call Forwarding
e) Call Log, Incoming
f) Call Pickup Deny
g) Call Waiting
h) Data Line Security
i) Do Not Disturb (DND)
j) Executive Busy Override Deny
k) Log-In/Log-Out
l) Message Waiting – (All messages will be erased.)
m) Paging — DENY
n) Pickup Dialing (Hot Line)...

3-110Telephone Features
S3.2 Telephone Features
Condition
•This feature is not available for rotary telephones.
Programming Reference
•Station Programming (Section 2)
Intercom Alert Assignment
Switching to Tone Alert
“Voice Call” (through the built-in speaker) which is set at the called party’s extension can
be switched to “Tone Call” (ringing). This feature must be set beforehand at the called
party’s extension by Station Programming.
Any Telephone
extension no.
Lift the handset or press...

Telephone Features3-111
3.2 Telephone FeaturesS
Conditions
•System Speed Dial numbers must be stored by System Programming.
•“Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.
•You may press a CO button or dial a line access code to select a desired outside (CO)
line before pressing the AUTO DIAL/STORE button or dialing  .
•It is possible to change toll restriction COS number with this feature (Toll Restriction
for System Speed Dialing). In this case, System Programming is...

3-112Telephone Features
T3.2 Telephone Features
Condition
•The Day/Night/Lunch mode is automatically switched at a predetermined time
(default: 9:00 AM for every day, 5:00 PM for every night), if the automatic mode is
selected.
Programming References
•System Programming — Installation Manual
[006] Time (Day/Night/Lunch) Service Changing Mode
[007] Time (Day/Night/Lunch) Service Start Time
Feature References
Time (Day/Night/Lunch) Service Setting (3.3 Operator/Manager Service Features)
Time...

Telephone Features3-113
3.2 Telephone FeaturesT
Timed Reminder
You can receive a ringback at your telephone to remind you of a meeting or appointment.
Either one time or daily (everyday until canceled) is available at a pre-set time.
Setting
Any Telephone
Lift the handset or press SP-PHONE/MONITOR.Dial 76.
Hang up or press 
SP-PHONE/MONITOR.
Enter the hour 
(01 through 12).
Dial #.
hourminute
For AM: Dial 0. 
For PM: Dial 1.
For a one time alarm*
1: Dial 1. 
For a daily alarm*2: Dial 2.
Enter the minute...

3-114Telephone Features
T3.2 Telephone Features
Conditions
•Be sure the system clock is set correctly.
•The alarm continues for thirty seconds.
•If you receive an incoming call during the alarm, ringing starts after the alarm stops.
•If the alarm is set to sound during a conversation, the alarm will start after the
conversation.
•If the operator, manager or you set a new time, the preset time will be cleared.
•If an alarm time has not been set, the display will show the following.
Programming Reference...

Telephone Features3-115
3.2 Telephone FeaturesT
Toll Restriction Override
There are three types of toll restriction override.
• Toll Restriction Override by Account Codes
• Toll Restriction for System Speed Dialing
• Toll Restriction — Station Lock Boundary Class
Toll Restriction Override by Account Codes
Allows you to temporarily override toll restriction and make a toll call from a toll-
restricted telephone assigned to the verify-toll mode. You can carry out this feature by
entering a pre-assigned...

3-116Telephone Features
T3.2 Telephone Features
Toll Restriction for System Speed Dialing
Allows you to change the toll restriction in “System Speed Dialing”. Normally, calls
originated by “System Speed Dialing” are restricted depending on the extension’s toll
restriction COS number. Once this option is set, the COS number is changed to the one
assigned in the program [301]. You can select the toll restriction COS number by System
Programming.
Programming Reference
•System Programming — Installation...