Panasonic Kx Ta308 User Manual

Appendix4-7
4 Appendix
Conditions
• If the displayed characters exceed sixteen digits, “&” is shown on the right-hand side
of the display.
• The duration time display is only shown when you make or receive an outside call. 
The Count start time for outgoing calls can be programmed as desired.
• When you confirm key programming, be sure to press the button while on-hook. 

4-8Appendix
4 Appendix
Additional Required DigitsNumberFeature
Feature Number List
Feature Numbers and Additional Required Digits 
Absent Message Capability set / cancel
Account Code Entry for an SLT
Call Forwarding set / cancel
Call Forwarding — Follow Me set / cancel
Call Hold (Hold Mode 2 or 3) for an SLT
Call Hold, Retrieve outside call / intercom call
Call Log, Incoming
Logging — Personal Area
Logging — Common Area
Cancel
Call Log, Incoming in the Common Area All Clear
Call Log, Incoming in the...

Appendix4-9
4 Appendix
Additional Required DigitsNumberFeature
*2hhmm hh: hour (01 - 12) / mm: minute (00 - 59)
Extension Number
External Feature Access for an SLT
Log-In / Log-Out
Message Waiting set / cancel
Message Waiting cancel all messages
Message Waiting for Another Extension cancel all
messages
Message Waiting for Another Extension Lock set
cancel
Operator Call
Outward Dialing
—  Line Access, Automatic
— Line Access, Outside (CO) Line Group
Paging — All
Paging — External
Paging — Group all /...

4-10Appendix
4 Appendix
NumberFeature
Feature Numbers
Condition
• When “ ” or “#” are included in a feature number, users with rotary telephones cannot
access the feature except for the ones which can use “0” instead of “#”.
While a busy tone is heard
Automatic Callback Busy (Camp-On)
Busy Station Signaling (BSS)
Executive Busy Override
While a Do Not Disturb tone is heard
Do Not Disturb (DND) Override
During a call or while talking
Switching to Tone Alert
Conference for an SLT
Door open
Pulse to Tone...

Appendix4-11
4 Appendix
Tone List
1 s
Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Dial Tone 1
Dial Tone 2
Dial Tone 3
Busy Tone 
Reorder Tone
Ringback Tone
< TONE >
Do Not Disturb (DND) Tone
Outside-to-Outside 
(CO-to-CO) Line 
Call Limit Warning Tone
Call Waiting Tone 1
Call Waiting Tone 2
(Single)
5 s
Call Waiting Tone 2
(Double)
Call Waiting Tone 2
(Triple)
Hold Alarm
15 s
15 s 

4-12Appendix
4 Appendix
1 s
Incoming Calls (Single) /
Hold Recall (Outside calls)
Callback Ringing (Camp-on 
Recall) / Doorphone Ringing 
(S-Double)
< RING TONE >
Incoming Calls (Double) /
Hold Recall (Intercom calls)
Incoming Calls (Triple) / 
Timed Reminder 

Appendix4-13
4 Appendix
ProblemProbable CausePossible Solution
The unit does not ring.
The display flashes the
following message.
Set Time & Date
• An outside (CO) line
number is not programmed.
• The Ringer Volume is set to
“OFF”.
The system internal clock is
not working properly.• To program outside (CO) line
numbers, refer to the Installation
Manual.
• Increase the Ringer Volume. Refer
to “Initial Settings” (Section 1.1).
Consult with an authorized
Panasonic Factory Servicenter.
If a power failure...

PSQX3024ZAKK1203HK0
Panasonic Consumer Electronics Company, 
Division of Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, 
New Jersey 07094
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc. 
Ave. 65 de Infantería, Km. 9.5, 
San Gabriel Industrial Park, Carolina, 
Puerto Rico 00985
Copyright:
This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). 
You may print out this manual solely for internal use with this model. Except above, you may...