Panasonic Kx Mc6040 Operating Instructions Manual

9. Programmable Features
61
Setting the Error Correction 
Mode (ECM)
{#}{4}{1}{3}This feature is available when the sending / receiving fax machines are ECM 
compatible.
{0} “Off”: Deactivates this feature.
{1} “On” (default): Fax transmission / reception will be carried out so that the 
errors do not occur.
Setting the connecting tone
{#}{4}{1}{6}If you often have trouble when sending faxes, this feature allows you to hear 
connecting tones: fax tone, ring back tone and busy tone. You can use these...

9. Programmable Features
62
Setting the memory reception 
alert
{#}{4}{3}{7}To alert you with a beeping sound when a received fax document is stored into 
memory due to some existing problem.
{0} “Off”: Deactivates this feature.
{1} “On” (default): You will hear a beeping sound.
Note:
LThe slow beeps will continue until you solve the printing problem and make 
sure the unit is supplied with enough paper to print the stored document.
Setting friendly reception
{#}{4}{3}{8}To receive a fax automatically...

9. Programmable Features
63
Resetting fax features to their 
default settings
{#}{4}{5}{9}{0} “No” (default)
{1} “Yes”
To reset the fax features:
1.{Menu} i {#}{4}{5}{9}
2.Press {1} to select “Yes”. i {Set} i {Set} i {Menu}
Note:
LThe PC fax reception (feature #443 on page 24) will not be reset.
LIf you select “Yes”, the unit will print the received fax documents that have 
been stored into memory.
Setting the information for 
saving a fax document as an 
e-mail attachment (via an e-
mail server) (LAN...

9. Programmable Features
64
9.4 Copy features
Feature/CodeSelection
Setting the paper input tray to 
use for copy
{#}{4}{6}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 58)
– Optional input tray (feature #382 on page 58)
If either is changed, “#1” will be...

9. Programmable Features
65
9.5 PC print features
Feature/CodeSelection
Setting the paper input tray in 
PCL
{#}{7}{6}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 58)
– Optional input tray (feature #382 on page 58)
If either is changed, “#1” will be...

9. Programmable Features
66
Setting the font number in 
PCL
{#}{7}{6}{9}To set the font number to be used in PCL printing. The unit assigns a number 
to each font.
1.{Menu} i {#}{7}{6}{9} i {Set}
2.Enter the font number from “000” to “054”, using the dial keypad.
LThe default setting is “000”.
3.{Set} i {Menu}
Note:
LIf feature #768 is set to “Download Font”, the default setting is “001”.
LTo print the font list, see page 104.
Setting the font pitch/point in 
PCL
{#}{7}{7}{0}To set the font pitch/point...

9. Programmable Features
67
Setting mutual A4/letter print
{#}{7}{7}{6}This feature allows printing in A4-size even if letter-size recording paper is 
installed, and vice versa.
{0} “Off”: Deactivates this feature.
{1} “On” (default): Printing is possible between A4/letter-size.
Feature/CodeSelection 

9. Programmable Features
68
9.6 Scan features
Feature/CodeSelection
Setting the scan mode for 
scanning to your computer
{#}{4}{9}{3}{1} “Viewer” (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{2} “File”: The scanned image will be saved as a file.
{3} “E-Mail”: The scanned image will be saved for e-mail attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
Holding the previous 
scanning parameter for Push 
Scan
{#}{4}{9}{4}{0} “Disabled”...

9. Programmable Features
69
Setting the information for 
scan to FTP (LAN connection 
only)
LThis feature can be 
programmed only through 
the web browser interface.When you send scanned files to an FTP server, you can register FTP 
destinations (up to 6 destinations) to the unit through the web browser interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Advance Configuration]
3.Type “root” as the user name, then enter the password (feature #155 on 
page 57). i [OK]...

9. Programmable Features
70
9.7 LAN features
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “Disabled”: Deactivates this feature.
{1} “Enabled” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{Menu} i {#}{5}{0}{1} i {Set}
2.Enter the IP address of the...