Panasonic Kx Mc6040 Operating Instructions Manual

9. Programmable Features
71
Approving users for the LAN 
connection
{#}{5}{3}{2}{0} “Disabled” (default): Deactivates this feature.
{1} “Enabled”: The unit will deny/approve access from the pre-programmed 
IP patterns. Whether to deny or approve, and up to 4 patterns can be 
programmed through the web browser interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Network Configuration]
3.Type “root” as the user name, then enter the password (feature #155 on 
page 57). i...

9. Programmable Features
72
9.8 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
FeatureTa bSelection
Setting the LAN 
features[LAN Feature]Enter the LAN feature settings. See page 70 for details.
Setting the community 
name for SNMP[SNMP]Enter the SNMP community name. Consult your 
service provider or network administrator for details.
Setting the location 
where you use this unit[SNMP]Enter the location information of the unit.
Displaying...

9. Programmable Features
73
Setting the scan to e-
mail print feature[Scan to E-Mail Print][Enabled]: The unit will automatically print e-mail 
attachments that it receives.
[Disabled] (default): Deactivates this feature.
See page 31 for details.
Setting the e-mail 
checking interval for the 
scan to e-mail print 
feature[Scan to E-Mail Print]Enter the desired e-mail checking interval.
Setting the header print 
option for the scan to e-
mail print feature[Scan to E-Mail Print][Enabled] (default): The...

10. Useful Information
74
10 Useful Information U se ful  In for m at i on
10.1 Character entry
The dial keypad is used to enter characters and 
numbers.
–Press {} to move the cursor.
– Press dial keys to enter characters and numbers.
–Press {Back} to erase the character or number 
highlighted by the cursor. Press and hold {Back} to 
erase all characters or numbers.
– To enter another character located on the same dial 
key, press {>} to move the cursor to the next space, 
then press the appropriate dial...

10. Useful Information
75
10.2.2 Using Device Monitor
You can confirm the setting information and current 
status of the unit from your computer.
1Start Multi-Function Station.
2[Utilities] i [Device Monitor]
LThe [Device Monitor] window will appear.
3Confirm the status of the unit.
[Status]: Current status of the unit
Note:
LAdditional information (toner and recording paper 
status, unit information, etc.) will be displayed in 
[Status] tab by clicking [Advanced Information].
LYou can update the status...

10. Useful Information
76
10.4 Changing the color 
calibration
If color printing is too dark or too light, change the color 
calibration.
1Select the desired color to change the calibration.
LTo change the color density for cyan, magenta, 
yellow and black, press {Menu}. i 
{#}{4}{8}{5}
LTo change the color calibration for cyan, press 
{Menu}. i {#}{4}{8}{6}
LTo change the color calibration for magenta, 
press {Menu}. i {#}{4}{8}{7}
LTo change the color calibration for yellow, press 
{Menu}. i...

10. Useful Information
77
3Lift the handset cradle in the direction indicated by 
the arrow (4) to insert the tab (5), then insert the 
rib (6) by pushing the handset unit toward the unit.
4Pull out the handset cord holder (7) and pass the 
handset cord (8) through the handset cord holder.
5Place the handset (9) on the handset cradle, then 
connect the handset cord (j) to the handset.
Note:
LWhile talking to the other party, you can send a fax 
using the scanner glass as follows.
1Press {V} or {^}...

10. Useful Information
78
3.Pull the handset unit slightly forward (4), then lift it in 
the direction of the arrow (5) to remove the rib.
4.Remove the tab (6), then disconnect the handset 
connector (7).
10.6 Optional automatic duplex 
unit
You can add an optional automatic duplex unit. See page 
7 for accessory information.
A4, letter or legal-size recording paper (plain and thin) 
can be used.
Important:
LBefore starting installation of the optional 
automatic duplex unit, be sure to turn the power...

10. Useful Information
79
–To use thin paper, change the recording paper 
type setting (feature #383 on page 58).
Important:
LBefore starting installation of the optional input 
tray, be sure to turn the power switch OFF. For 
more details about the installation, please refer 
to the installation guide for the optional input 
tray.
LAfter installation, you can select the optional 
input tray to be used for the following:
– Paper input tray setting for faxing (feature 
#440 on page 62).
– Paper input tray...

10. Useful Information
80
10.8 Setting the optional input 
tray/optional automatic duplex 
unit
To use the optional input tray/optional automatic duplex 
unit with your computer, proceed as follows.
LThis setting is necessary for both the color and 
monochrome printer drivers.
1[Start]
2Open the printer window.
For Windows 98/Windows Me/Windows 2000:
[Settings] i [Printers]
For Windows XP Professional:
[Printers and Faxes]
For Windows XP Home:
[Control Panel] i [Printers and Other 
Hardware] i [Printers...