Panasonic Kx Mc6020 Operating Instructions Manual

9. Programmable Features
61
9.3 Fax features
Feature/CodeSelection
Printing a confirmation report
{#}{4}{0}{1}{0} “OFF”: Confirmation reports will not be printed.
{1} “ON”: A confirmation report will be printed after every fax transmission.
{2} “ERROR” (default): A confirmation report will be printed only when fax 
transmission fails.
Setting the journal report to 
print automatically
{#}{4}{0}{2}{0} “OFF”: The unit will not print a journal report, but will keep a record of the 
last 30 fax transmissions...

9. Programmable Features
62
Setting the Error Correction 
Mode (ECM)
{#}{4}{1}{3}This feature is available when the sending / receiving fax machines are ECM 
compatible.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): If there is an error during fax transmission / reception, the 
unit will support the communication.
Setting the connecting tone
{#}{4}{1}{6}If you often have trouble when sending faxes, this feature allows you to hear 
connecting tones: fax tone, ring back tone and busy tone. You...

9. Programmable Features
63
Setting friendly reception
{#}{4}{3}{8}To receive a fax automatically when you answer a call and hear a fax calling 
tone (slow beep).
{0} “OFF”: You have to press {Black} for fax reception.
{1} “ON” (default): You do not have to press {Black} for fax reception.
Setting the paper input tray to 
use for printing received 
faxes
{#}{4}{4}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional...

9. Programmable Features
64
9.4 Copy features
Feature/CodeSelection
Setting the paper input tray to 
use for copy
{#}{4}{6}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 58)
– Optional input tray (feature #382 on page 58)
If either is changed, “#1” will be...

9. Programmable Features
65
9.5 PC print features
Feature/CodeSelection
Setting the paper input tray in 
PCL
{#}{7}{6}{0}This feature will be displayed only when the optional input tray is installed.
{1} “#1” (default): Standard input tray
{2} “#2”: Optional input tray
{3} “#1+#2”
Note:
LIf you select “#1+#2”, make sure the same paper size is selected for the 
following:
– Standard input tray (feature #380 on page 58)
– Optional input tray (feature #382 on page 58)
If either is changed, “#1” will be...

9. Programmable Features
66
Setting the font number in 
PCL
{#}{7}{6}{9}To set the font number to be used in PCL printing. The unit assigns a number 
to each font.
1.{Menu} i {#}{7}{6}{9} i {Set}
2.Enter the font number from “000” to “054”, using the dial keypad.
LThe default setting is “000”.
3.{Set} i {Menu}
Note:
LIf feature #768 is set to “DOWNLOAD FONT”, the default setting is “001”.
LTo print the font list, see page 103.
Setting the font pitch/point in 
PCL
{#}{7}{7}{0}To set the font pitch/point...

9. Programmable Features
67
Setting mutual A4/letter print
{#}{7}{7}{6}This feature allows printing in A4-size even if letter-size recording paper is 
installed, and vice versa.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): Printing is possible between A4/letter-size.
Feature/CodeSelection 

9. Programmable Features
68
9.6 Scan features
Feature/CodeSelection
Setting the scan mode for 
Push Scan
{#}{4}{9}{3}{1} “VIEWER” (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{2} “FILE”: The scanned image will be saved as a file.
{3} “E-MAIL”: The scanned image will be saved for e-mail attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
{5} “E-MAIL SERVER”: The scanned image will be sent as an attachment 
without using e-mail software....

9. Programmable Features
69
Registering the scan to e-mail 
destinations (via e-mail 
server) (LAN connection 
only)
LThis feature can be 
programmed only through 
the web browser interface.When you send scanned files via e-mail server, you can register e-mail 
destinations (up to 300 destinations) for the unit through the web browser 
interface in advance.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Device Configuration]
3.Type “root” as the user name, then enter the...

9. Programmable Features
70
9.7 LAN features
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{Menu} i {#}{5}{0}{1} i {Set}
2.Enter the IP address of the...