Panasonic Kx Mc6020 Operating Instructions Manual

9. Programmable Features
71
Approving users for the LAN 
connection
{#}{5}{3}{2}{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will deny/approve access from the pre-programmed 
IP patterns. Whether to deny or approve, and up to 4 patterns can be 
programmed through the web browser interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Network Configuration]
3.Type “root” as the user name, then enter the password (feature #155 on 
page 58). i...

9. Programmable Features
72
9.8 Network features (LAN connection only)
These features can be programmed only through the web browser interface.
FeatureTa bSelection
Setting the community 
name for SNMP[SNMP]Enter the SNMP community name. Consult your 
service provider or network administrator for details.
Setting the location 
where you use this unit[LAN FEATURE]Enter the location information of the unit.
Displaying the link local 
address[IPv6]The link local address will be displayed.
Displaying the IP...

9. Programmable Features
73
Note:
LSee the following sections for details on these related features:
– DHCP mode (feature #500 on page 70)
– IP address (feature #501 on page 70)
– Subnet mask (feature #502 on page 70)
– Default gateway (feature #503 on page 70)
– DNS server #1 (feature #504 on page 70)
– DNS server #2 (feature # 505 on page 70)
– Machine name (feature #507 on page 70)
– Approved users (feature #532 on page 71)
– Auto IP (feature #533 on page 71)
– HTTPD (feature #534 on page 71)
– IPv6...

10. Useful Information
74
10 Useful Information U se ful  In for m at i on
10.1 Character entry
The dial keypad is used to enter characters and 
numbers.
–Press {} to move the cursor.
– Press dial keys to enter characters and numbers.
–Press {Stop} to erase the character or number 
highlighted by the cursor. Press and hold {Stop} to 
erase all characters or numbers.
– To enter another character located on the same dial 
key, press {>} to move the cursor to the next space, 
then press the appropriate dial...

10. Useful Information
75
10.2 Status of the unit
10.2.1 Using Remote Control
You can easily operate the following functions from your 
computer.
– Programming the features (page 57)
– Storing, editing or erasing items in directories (page 
44)
– Storing or erasing items for broadcast transmission 
(page 46)
– Viewing items in the journal report (page 43)
– Saving the journal report on your computer
– Viewing items in the Caller ID list (page 53)
– Storing caller information into directories (page 54)
–...

10. Useful Information
76
10.3 Canceling the operations
You can cancel the current operation from the unit. You 
can also select the desired operation to cancel.
1{Stop}
L“USER STOPPED” is displayed.
LWhen “USER STOPPED” is not displayed, go to 
step 2.
2To cancel printing:
Press {Stop} repeatedly to display “STOP 
PRINTING?”.
To cancel scanning:
Press {Stop} repeatedly to display “STOP 
SCANNING?”.
To cancel copying:
Press {Stop} repeatedly to display “STOP 
COPYING?”.
To cancel sending or receiving...

10. Useful Information
77
Option
10.5 Optional handset unit
You can add the optional handset unit. See page 7 for 
accessory information.
Important:
LBefore installing or removing the optional 
handset unit, be sure to turn the power switch 
OFF. For more details about the installation, 
please refer to the installation guide for the 
optional handset unit.
1Connect the handset cord (1) to the handset cradle.
2Connect the handset connector (2).
LRemove the cover (3) from the handset unit 
connection jack...

10. Useful Information
78
5Place the handset (9) on the handset cradle, then 
connect the handset cord to the handset (j).
Note:
LWhile talking to the other party, you can send a fax 
using the scanner glass by pressing {Black} i {1} 
(To receive a fax, press {2}).
To remove the handset unit
1.Disconnect the handset cord (1) from the handset, 
then remove the handset (2) from the handset 
cradle.
2.Remove the handset cord from the handset cord 
holder (3), then close the handset cord holder.3.Pull the...

10. Useful Information
79
10.6 Optional automatic duplex 
unit
You can add the optional automatic duplex unit. See 
page 7 for accessory information.
A4, letter or legal-size recording paper (plain and thin) 
can be used.
Important:
LBefore starting installation of the optional 
automatic duplex unit, be sure to turn the power 
switch OFF. For more details about the 
installation, please refer to the installation guide 
for the optional automatic duplex unit.
10.7 Optional input tray
You can add the...

10. Useful Information
80
LDo not position the unit in a location where it is 
unstable or subject to vibrations. The unit weighs 
approximately 40 kg (88 lb) when the optional input 
tray is installed and the recording paper is fully 
installed.
10.7.1 Setting the optional input tray
To use the optional input tray with your computer, 
proceed as follows.
1[Start]
2Open the printer window.
For Windows 98/Windows Me/Windows 2000:
[Settings] i [Printers]
For Windows XP Professional:
[Printers and Faxes]...