Panasonic KX FLB853 User Manual

8. Programmable Features
59
Overseas mode{#}{4}{1}{1}{0}: “OFF” {1}: “NEXT FAX” 
{2}: “ERROR” (default)page 63
Delayed send{#}{4}{1}{2}{0}: “OFF” (default) {1}: “ON”page 63
ECM selection{#}{4}{1}{3}{0}: “OFF” {1}: “ON” (default) page 64
Connecting tone{#}{4}{1}{6}{0}: “OFF” {1}: “ON” (default) page 64
Distinctive Ring{#}{4}{3}{0}{0}: “OFF” (default) {1}: “ON”page 41
Fax ring pattern{#}{4}{3}{1}{1}: “A” {2}: “B” {3}: “C” {4}: “D” 
{5}: “B-D” (default)page 42
Auto reduction{#}{4}{3}{2}{0}: “OFF” {1}: “ON”...

8. Programmable Features
60
Output tray setting for 
copying{#}{4}{6}{6}{1}: “#1” (default)
{2}: “#2” {3}: “#3”page 67
Toner save{#}{4}{8}{2}{0}: “OFF” (default) {1}: “ON”page 63
Default scan type{#}{4}{9}{0}{1}: “B/W TEXT” (default) 
{2}: “B/W GRAPHIC” 
{3}: “B/W PHOTO” 
{4}: “COLOR”page 67
Default scan resolution{#}{4}{9}{1}{1}: “200dpi” 
{2}: “300dpi” (default) 
{3}: “600dpi”page 67
Default scan size{#}{4}{9}{2}{1}: “LETTER” (default) {2}: “A4” 
{3}: “LEGAL”page 67
DHCP mode setting{#}{5}{0}{0}{0}:...

8. Programmable Features
61
8.3 Basic features
{#}{1}{0}{0} Setting the quick setup
QUICK SETUP
PRESS SET
You can print out the quick fax setup guide and 
select the desired receiving mode depending on 
your situation.
{1} “FAX ONLY” (default): Use only as a fax 
(page 34).
{2} “DIST. RING”: With the Distinctive Ring 
service (page 41).
{3} “EXT. TAM”: With an external telephone 
answering machine (page 35).
{4} “TEL ONLY”: Mostly phone calls (page 34).
1.Press {MENU}.
2.Press {#}, then {1}{0}{0}....

8. Programmable Features
62
{0} “OFF” (default): The unit will not print the 
Caller ID list, but will keep records of the 
information for the last 30 callers.
{1} “ON”: The unit will print the Caller ID list 
automatically after every 30 new calls (page 38).
{#}{3}{2}{2} Enabling remote operation for 
a telephone answering machine 
REMOTE TAM ACT.
MODE=OFF [V^]
If you are using the unit with an answering 
machine, activate this feature, and program the 
remote activation ID to retrieve recorded voice...

8. Programmable Features
63
To set the timer before returning to the default 
operation mode (feature #463).
{0} “OFF”: Deactivates this feature.
{1} “30s”: 30 seconds
{2} “1min” (default): 1 minute
{3} “2min”: 2 minutes
{4} “5min”: 5 minutes
{#}{4}{8}{2} Setting toner save feature
TONER SAVE
MODE=OFF [V^]
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
Note:
LThis feature may lower the print quality by 
reducing toner consumption.
8.4 Fax features...

8. Programmable Features
64
company. This feature can be set up to 24 hours 
in advance of the desired time.
{0} “OFF” (default)
{1} “ON”
To send a document:
1.Insert the document into the auto document 
feeder.
2.If necessary, change to the desired resolution 
(page 26) and the desired contrast (page 26).
3.Press {MENU}.
4.Press {#}, then {4}{1}{2}.
5.Press {1} to select “ON”.
6.Press {SET}.
7.Enter the fax number.
LTo enter an item using one-touch dial 
feature and navigator directory, see step 4 
on...

8. Programmable Features
65
3.Press {1} to select “ON”.
4.Press {SET}.
5.Enter your code from 2 to 4 digits, using 0–9, 
{*} and {#}.
LThe default code is “;#9”.
LDo not enter “0000”.
6.Press {SET}.
7.Press {MENU}.
{#}{4}{3}{7} Setting the memory reception 
alert
RECEIVE ALERT
MODE=ON [V^]
To alert you with a beeping sound when a 
received fax document is stored into memory 
due to some existing problem.
The slow beeps will continue until you clear the 
printing problem and make sure the unit is...

8. Programmable Features
66
1.Press {MENU}.
2.Press {#}, then {4}{5}{9}.
3.Press {1} to select “YES”.
4.Press {SET}.
5.Press {SET} again.
6.Press {MENU}.
8.5 Copy features
{#}{4}{6}{0} Setting the input tray to use for 
copying
COPY INPUT TRAY
=#1 [V^]
You can select the input tray that will be used for 
copying.
{1} “#1” (default): Paper input tray
{2} “#2”: Multi-purpose input tray
LWhen the optional input tray is installed, the 
following will be displayed.
{1}: “#1”
{2}: “#2”
{3}: “#3”
{4}: “#1+#3”...

8. Programmable Features
67
{1} “ON”: When making more than 4 sets of 
multiple copies, the unit will add a pause every 3 
sets of copies.
Note:
LIf you select “ON”, the unit will display the 
following and stop copying after every 3 sets 
of copies.
TO CONTINUE COPY
PRESS START
Remove the stacked paper, then press 
{START} to restart copying.
{#}{4}{6}{6} Setting the output tray to use 
for copying
COPY OUTPUT TRAY
=#1 [V^]
You can select the output tray that will be used 
for copying.
{1} “#1”...

8. Programmable Features
68
Note:
LIf the optional LAN board is not installed, the 
computer connected to the unit by USB is 
assigned as the ADMIN PC.
{#}{5}{0}{0} LAN setting with a DHCP 
server
DHCP
=ENABLED [V^]
{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED”(default): The following will be 
allocated automatically using a DHCP (Dynamic 
Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
{#}{5}{0}{1} Setting the IP address for the 
LAN connection
IP ADDRESS...