Panasonic Dp C354 Operating Instructions Manual

31
 Chapter 2    Basic Fax Transmission
5Choose the original size, and then 
select “OK”.
6Set “Quality Adj.” as required.
zRefer to Setting Original Quality (see page 
26).
7Select “Address Book”, and then 
select a destination.
zRefer to Entering a Destination (see page 
16).
8Press the Start key.
The original(s) are stored into memory with a 
file number.
zThe confirmation screen appears each time 
an original is scanned.
zWhen the last original is scanned, select 
“No” to start transmission.
LEDGER...

32
 Chapter 2    Basic Fax Transmission
Transmitting 2-Sided Originals
2-sided originals loaded in the ADF are scanned automatically with a specified binding edge position, 
and transmitted.
Two binding edge selections are available:
•Long Edge: 2-sided scanning is aligned to the long edge of the original.
•Short Edge: 2-sided scanning is aligned to the short edge of the original.
zThis feature works only when originals are loaded in the ADF.
zThe verification stamp feature does not work when a 2-sided...

33
 Chapter 2    Basic Fax Transmission
5Select a binding position, and then 
select “OK”.
6Set “Quality Adj.” as required.
zRefer to Setting Original Quality (see page 
26).
7Select “Address Book”, and then 
select a destination.
zRefer to Entering a Destination (see page 
16).
8Press the Start key.
The original(s) are stored into memory with a 
file number. Then starts dialing the telephone 
number.
Select when the 
binding position is on 
the long side of the 
original.
Select when the 
binding...

34
 Chapter 2    Basic Fax Transmission
Verification Stamp
This function confirms successful transmission, or storage 
into the memory by stamping at the bottom of each 
successfully transmitted original(s) with a small “x” mark. 
zThe standard setting of the verification is “Off”. The stamp setting can be changed with “04 Stamp (HOME)” in 
Function Parameters (Fax/Email Settings> Fax Parameters). For instructions on how to change the standard setting, 
refer to 
Fax/Email Settings in the Operating...

35
 Chapter 2    Basic Fax Transmission
Memo 

36
 Chapter 2    Basic Fax Transmission
Transmitting a Document Stored in Memor y
Documents can be quickly scanned, and stored in the memory before transmission.
This feature allows you to send the documents to multiple destinations without having to scan the 
same documents over again. It also allows you to retrieve your original(s) immediately without having 
to wait for the fax transmission to complete.
In addition to the memory transmission, the machine supports the direct transmission feature. In...

37
 Chapter 2    Basic Fax Transmission
To send documents using memory transmission, follow the steps below. (This is an example when the 
direct transmission is set as default in the Function Parameters.)
1Place Original(s).
zRefer to Placing Originals (Facsimile/Internet 
Fax) in the Operating Instructions
 (For Basic 
Operations) of provided booklet.
2Press the Fax key.
3Select “Basic Menu”.
4Select “Memory”.
5Set “Quality Adj.” as required.
zRefer to Setting Original Quality (see page 
26).
6Select...

38
 Chapter 2    Basic Fax Transmission
Job Build and SADF
Job Build and SADF setting enables to scan sets of originals that exceed the maximum capacity of 
ADF. Special originals (like thin paper, etc.) can be fed from the ADF for Memory Transmission.
This function is available when “Job Build and SADF” is selected in the “Basic Menu”.
zThe standard setting of “133 Job Build and SADF Mode” is set to “No”. For instruction on how to change the 
standard setting, refer to Fax/Email Settings in the...

39
 Chapter 2    Basic Fax Transmission
7Select “Address Book”, and then 
select a destination.
zRefer to Entering a Destination (see page 
16)
8Press the Start key.
The original(s) are stored in to memory with a 
file number.
zFor instructions on how to cancel a 
transmission, refer to Canceling a 
Communication (see page 48)
9If you have another original(s), place 
the next original(s) within 5 seconds 
after the last original is scanned.
zIf you do not place the next original(s) within 
5 seconds, a...

40
 Chapter 2    Basic Fax Transmission
Direct Transmission
Documents can be transmitted immediately on scanning without storing into memory. Direct 
transmission is more convenient in situations as shown below:
‰When you want to send the documents right away.
‰When you want to send a large amount of documents.
zDirect transmission cannot be used to send documents to multiple destinations.
zMemory transmission may switch automatically to direct transmission when memory overflow occurs during 
document...