Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

							81
1 - File playback window
qList display area
The list of the files or the alarm logs will be dis-
played in this area. (page 78)
w[Alarm log] button
Click this button to display the alarm logs. 
(page 89)
e[File list] button
Click this button to display the list of the files.
(page 86)
rPlayback image display area
The recorded images will be displayed in this area
together with the camera title, recorder title, etc.t[ALTER DETECT] button
It is possible to check whether the image file was
altered.
Note:
Up to 2 GB per file can be checked. Anything
beyond 2 GB will not be checked.
y[EL-ZOOM] buttons
[x1]:The recorded image will be displayed with
normal size.
[x2]:The recorded image will be displayed with x2
zoomed size.
[x4]:The recorded image will be displayed with x4
zoomed size.
Clicking a point in the zoomed image moves the
zoomed image by positioning the clicked point as
the center point.
uPlayback control panel
Use the buttons on this panel to operate the
recorded images. (page 82)
r
t
y
u
qw
e 
						

							82
(1) Playback image display area
qRecorder title
The title of the recorder from which the recorded
image was downloaded will be displayed.
wCamera title
The title of the camera from which the image was
recorded will be displayed.eTime & Date
The time and date when the image was recorded
will be displayed. The time and date will be fol-
lowed by an asterisk [
*] when daylight saving is
applied.
rPlayback image display area
The recorded images will be played in this area.
qw e
r
(2) Playback control panel
qTime-line slider
The left edge is the start time and the right edge is
the end time. The position of the knob indicates the
point on the time-line of the images currently play-
ing. It is possible to go to the desired point of the
time-line by dragging the knob. When the knob is
released, the playback will be paused.wPlayback speed slider
The position of the knob indicates the playback
speed of the images currently playing. When the
knob is at the center point, the recorded images will
be played at the normal speed. When the knob is
moved to the right, the playback speed will be
changed as follows: x1/2, x1, x2, x5, x10, x20, x50,
x100
ertyuri
wq
o!0 
						

							83
When the knob is moved to the left, the recorded
images will be played in reverse and the playback
speed will be changed as follows: x1/2, x1, x2, x5,
x10, x20, x50, x100
The indicated numbers of playback speed are for
reference.
When playing images reversely, some frames of
recorded images will not be displayed. Images will
be played reversely with the set refresh interval of
the camera.
e[Audio] button
Click this button to turn on/off audio when the audio
is attached to the images currently playing.
(page 94)
rFrame play/reverse frame play
The previous frame will be displayed and paused
when the [PREV IMAGE] button is clicked.
The previous frame will be displayed and paused
when the [NEXT IMAGE] button is clicked.
When playing frames reversely, some frames of
recorded images will not be displayed. Frames will
be played reversely with the set refresh interval of
the camera.
t[PAUSE] button
The playback will be stopped when this button is
clicked during playback.
y[PLAY] button
The playback will be resumed when this button is
clicked during pausing.
u[STOP] button
Stops playback and goes to the start point of the
recorded images by clicking this button during play-
back or pausing.
i[Auto playback] button
When this button is lit green, playback from the
start point to the end point of all of the recorded
images on the list shown in the list display area will
be performed sequentially. When playback of all
the recorded images has finished, the playback will
be automatically paused at the end point of the last
recorded image. (page 95)o[CH] buttons
It is possible to switch the camera channel dis-
played on a single screen when an image file com-
posed of multiple channels is being played back.
Previous channel button:
Click this button to display the recorded
images of the previous camera channel to the
camera channel of the images currently
playing.
Next channel button:
Click this button to display the recorded
images of the next camera channel to the
camera channel of the images currently
playing.
!0[SPOT]/[Quad Screen]/[9 Screen]/[16 Screen]
buttons
•It is possible to switch the display pattern on a multi
screen when an image file composed of multiple
channels is being played back.
•Click the [SPOT] button and select the desired
camera channel to display the recorded images on
a single screen.
•Click the [Quad Screen] button to display the
desired recorded images on a 4-split screen. Each
time this button is clicked, the camera channels on
which the recorded images are to be displayed will
be changed as follows: CH 1 - 4 →CH 5 - 8 →CH
9 - 12 →CH 13 - 16 →CH 17 - 20…
•Click the [9 Screen] button to display the recorded
images on a 9-split screen. Each time this button is
clicked, the camera channels on which the record-
ed images are to be displayed will be changed as
follows: CH 1 - 9 →CH 10 - 18 →CH 19 - 27 →
CH 28 - 32 →CH 1 - 9…
•Click the [16 Screen] button to display the recorded
images on a 16-split screen. Each time this button
is clicked, the camera channels on which the
recorded images are to be displayed will be
changed as follows: CH 1 - 16 →CH 17 - 32 →CH
1 -16…
The usable numbers of camera channel is 16.
HD300 
						

							84
4 - File playback window
qList display area
The list of the files or the alarm logs will be dis-
played in this area. (page 78)
w[Alarm log] button
Click this button to display the alarm logs.
(page 89)e[File list] button
Click this button to display the list of the files.
(page 86)
rPlayback image display area
The recorded images will be played in this area.
tPlayback control panel
Use the buttons on this panel to operate the
recorded images. (page 85)
r
t
qwe
q
w
(1) Playback image display area 
						

							85
qTime & Date
The time and date when the image was recorded
will be displayed. The time and date will be fol-
lowed by an asterisk [
*] when daylight saving is
applied. wPlayback image display area
The recorded images will be played in this area.
(2) Playback control panel
ertye
wq
u
qTime-line slider
The left edge is the start time and the right edge is
the end time. The position of the knob indicates the
point on the time-line of the images currently play-
ing. It is possible to go to the desired point of the
time-line by dragging the knob. When the knob is
released, the playback will be paused.
wPlayback speed slider
The position of the knob indicates the playback
speed of the images currently playing. When the
knob is at the center point, the recorded images will
be played at the normal speed. When the knob is
moved to the right, the playback speed will be
changed as follows: x1/2, x1, x2, x5, x10, x20, x50,
x100
When the knob is moved to the left, the recorded
images will be played in reverse and the playback
speed will be changed as follows: x1/2, x1, x2, x5,
x10, x20, x50, x100
The indicated numbers of playback speed are for
reference.
When playing images reversely, some frames of
recorded images will not be displayed. Images will
be played reversely with the set refresh interval of
the camera.
eFrame play/reverse frame play
The previous frame will be displayed and paused
when the [PREV IMAGE] button is clicked.
The previous frame will be displayed and paused
when the [NEXT IMAGE] button is clicked.
When playing frames reversely, some frames of
recorded images will not be displayed. Frames will
be played reversely with the set refresh interval of
the camera.
r[PAUSE] button
The playback will be stopped when this button is
clicked during playback.
t[PLAY] button
The playback will be resumed when this button is
clicked during pausing.
y[STOP] button
Stops playback and goes to the start point of the
recorded images by clicking this button during play-
back or pausing.
u[CH] buttons
It is possible to switch the camera channel dis-
played on a single screen when an image file com-
posed of multiple channels is being played back.
Previous channel button:
Click this button to display the recorded
images of the previous camera channel to the
camera channel of the images currently play-
ing.
Next channel button:
Click this button to display the recorded
images of the next camera channel to the
camera channel of the images currently play-
ing. 
						

							86
Browse the Downloaded Files in the Local Mode
Step 1
Run the main application in the local mode.
If the main application has not started, start the main
application. Refer to page 20 for descriptions of how to
start the main application.Step 2
Select Local(L) from Mode(M) on the menu bar or
click the [Local mode] button.
The list display window will be displayed in the local
mode.
Note:
When Local mode(L) is selected for Default
screen of the optional settings (on the option win-
dow), the local mode list window will be displayed.
The operation window in the network mode will be
displayed immediately after logging in at the default
setting.
Display the list of the files downloaded from the recorder
Step 1
Select List view(L) from View(V) on the menu bar or
click the [List view] button on the tool bar. The list dis-
play window (in the local mode) will be displayed. 
						

							87
Display the thumbnails of the files
downloaded from the recorder
Step 1
Display the list of files
Step 2
When displaying the downloaded files in list form, click
the [Thumbnail view] button.
The downloaded files will be displayed with the thumb-
nails.
qThumbnail
The first frame of the recorded image will be dis-
played.
The thumbnail display is not available for MPEG-4
image.
wFROM
The start time and date when the image was
recorded will be displayed.
Note:
The file status icon and the start time and date
when the image was recorded will be displayed
with the thumbnails. When the cursor is moved
onto the thumbnail, other information will be dis-
played in the pop-up window.
q
w 
						

							88
Step 2
Enter comments and click the [Save(S)] button.
The entered comment will be saved.
Delete the downloaded file ADMIN ADMIN
Step 1
Select the desired downloaded file to be deleted.
Select Delete(D)… from File(F) on the menu bar or
click the [Delete] button on the tool bar.
The deletion confirmation window will be displayed.Step 2
Click the [Yes] button.
The selected downloaded file will be deleted.
Notes:
•It is possible to select two or more files to be delet-
ed by clicking the desired files while holding down
the Shift key or the Control key (CTRL) on the key-
board.
When using the Shift key, all the files between the
first clicked file and the last clicked file will be
selected.
•It may take a while when trying to delete a number
of files at one time.
Attach a comment to the downloaded file
Step 1
Select the desired downloaded file to which a com-
ment is to be attached.
Select Edit comments(C)… from File(F) on the
menu bar.
The Edit comments window will be displayed. 
						

							89
Notes:
•Up to 200 characters can be entered.
•When the unit has failed to save the entered com-
ment, a message window will be displayed. In this
case, follow the instructions again from step 1.Check the alarm log
Step 1
Select List view(L) from View(V) on the menu bar or
click the [List view] button on the tool bar. The list dis-
play window (in the local mode) will be displayed.
Step 2
Click the [Alarm log] button.
The alarm log will be displayed.
Refer to page 79 for further information about the list
display window. 
						

							90
Filter the Listed Files
All the downloaded files will be shown in the list display window in the local mode. It is possible to find the desired
files from the listed files using filtering.
Step 1
Bring up the list display window in the local mode.
Select List view(L) from View(V) on the menu bar or
click the [List view] button on the toolbar to bring up
the list display window when displaying another win-
dow, such as the single file playback window, in the
local mode.
Step 2
Select Filter setup(S)... from View(V) on the menu
bar or click the [Filter setup] button on the tool bar.
The Filter setup window will be displayed.
Perform the following settings:qSource list(S)
Designate the recorder from which the file was
downloaded.
wAttribute(A)
Designate the status of the downloaded file.
eFROM(F)
Designate the start time of the time range to be
used to filter the downloaded file.
rTO(T)
Designate the start time of the time range to be
used to filter the downloaded file.
tREC event(N)
Search for only images recorded with or without
recording event. Select Event(E) or Non-event
(O) whether or not to filter the downloaded file by
the recording event.
When selecting Event(E), designate the recording
event type from the following to be used to filter the
downloaded file.
•CAM(C)
•VMD(V)
•TERMINAL(R)
•COMMAND(D)
•VIDEO LOSS(I)
•EMERGENCY(M)
•PRE(P)
yComment(X)
Enter the character string to be used for filtering.
u[OK] button
Click this button to start filtering with the set condi-
tions.
i[Cancel] button
Click this button to cancel search with the selected
conditions and close the search window.
q
w
e
r
t
y
d
ui