Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

							61
Play the recorded images of the selected
result on a multi-screen
It is possible to play the searched recorded images on
a multi-screen while playing images in the playback
image display area on the search result list window by
switching the search result list window to the operation
window in the network mode.
Step 1
Double click the desired result.
The recorded images of the selected result will be dis-
played in the playback image display area.
Play the images selected from the search results
Select the desired images from the search results to play them back. Only a single screen display is available when
selected from the search results. To play on a multi-screen, display the operation window in the network mode and
play the searched recorded images.
Notes:
•
There may be cases where thumbnail indication is not available depending on the status of the network and the
recorder. If this happens, retry.
•
Thumbnails will not be displayed.
•
When a result is selected from the search result list window of the SD search and the result contains not many
frames (recorded at a recording event) to play smoothly, a black screen may be displayed or it may take time to
refresh images. In this case, display the image with frame playback/reverse frame playback.
ND300
ND300
HD300
Play the recorded images of the selected
result
Step 1
Double click the desired result.
The recorded images of the selected result will be dis-
played in the playback image display area.
Refresh interval of recorded images can be selected.
Right-click on the image currently being played and
change the value of Video Rate(I).
HD300 
						

							62
Step 2
Click the desired multi-screen button on the tool bar.
The search result list window will be switched to the
operation window in the network mode and the record-
ed images of the selected result will be displayed on
the selected multi-screen.
Notes:
•It is also possible to set the desired pattern of
screen by selecting 1(1), 4(2), 9(3) or 16(4)
(View(V) - Number of area(N) - 1(1)/4(2)/
9(3)/16(4)) from the menu bar.
•To display the search result list window again,
select Search(S) - Search result list(R) in the
menu bar, or click the [Search result list] button on
the tool bar.
•It is impossible to play on a multi-screen by switch-
ing to the operation window in the network mode
while playing images selected from the search
result list window of the SD search.
d 
						

							63
Download the images selected from the search results
It is possible to download images from the search results.
Notes:
•
When starting download on the search result list window of the SD search, SD memory data (images saved on
the SD memory card on the camera) will be downloaded.
•
Time length of downloaded images may sometimes be longer than the designated time range.
ND300
ND300
Download the images form the search
result list 
Step 1
Right click on the desired item of the search results
and select Download(D)… in the pop-up menu.
The download image file window will be displayed.
Step 2
Designate a time range (start and stop time) and click
the [Start download(D)] button.
ADMIN ADMIN
Download after playback
Step 1
Play the recorded images of the selected result
Step 2
Click the [DOWNLOAD] button.
The download image file window will be displayed.
Step 3
Designate a time range (start and end points) and click
the [Start download(D)] button. 
						

							64
Download Recorded Images
Important:
When using Windows®XP Professional or Home Edition SP2, it may be possible that the Windows Security
Alert window is displayed. In this case, click the Unblock button on the displayed Windows Security Alert win-
dow.
Manually download recorded images from the recorder
It is possible to manually download recorded images during playback by designating the start and end points. Refer
to page 92 for descriptions of how to play the downloaded recorded images.
Step 1
Playback of a recorded image will be performed.
Refer to page 52 for descriptions of how to play the
recorded images.
Step 2 
Click the [Start] button on the recorder control panel at
the desired point to set as the start point of the image
to be downloaded.
The time and date of the start point of the image to be
downloaded will be displayed at the bottom of the win-
dow.
Step 3 
Click the [End] button on the recorder control panel at
the desired point to set as the end point of the image
to be downloaded.
The time and date of the end point of the image to be
downloaded will be displayed at the bottom of the win-
dow.
Note:
The image recorded at the designated end time will
not be downloaded. 
						

							65
Step 4
Click the [DOWNLOAD] button.
The Download image file window will be displayed.
The time and date of the start point of the image to be
downloaded will be displayed in the FROM(F) boxes.
The time and date of the end point of the image to be
downloaded will be displayed in the TO(T) boxes.
Note:
There is another way to click the [DOWNLOAD]
button prior to using the [Start] and [End] buttons.
In this case, designate the start point FROM(F)
and the end point TO(T) in the Download image
file window.
It is possible to select channels to be used for down-
load.
ADMIN ADMIN
Step 5
For ADMIN user
When an ADMIN user is operating, the Download
image file window for ADMIN user will be displayed.
After selecting the channels for download, click the
[Start download(D)] button.
Download image file window for ADMIN user
It is possible to select two channels or more to be used
for download.
Select a standard channel (Standard CH) from the
pull-down.
Note:
It is impossible to select a standard channel when
the recorder in use is the WJ-ND200.
For normal user
When a user who is not ADMIN is operating, the fol-
lowing Download image file window will be displayed.
Download image file window for user 
who is not ADMIN
ND300 
						

							66
Automatically download recorded images at a designated time
(Schedule download) 
This software will start the downloading of the images of a specific time range at a designated time according to the
created schedule.
ADMIN ADMIN
Step 1
Select Schedule(S)… from Setup(O) on the menu
bar.
The schedule window will be displayed. It is possible to
display the schedule window both in the network mode
and the local mode.Refer to page 136 for further information about the
schedule window.
The schedule set on the schedule window will be reg-
istered in the downloader at the download start time.
When the schedule is invalid, the download will not be
performed even though the settings are saved. Refer
to page 138 for further information.
Note:
When the downloader is closed, the schedule
download will not be performed. When using the
schedule download function, activate the down-
loader. The downloader icon will be displayed in
the system tray when the downloader is active.
Click the [Start download(D)] button.
The download information (the start time and the end
time) will be registered in the downloader and a mes-
sage window will be displayed when completing the
download information registration.
Notes:
•The time range (duration from the start point to the
end point) for downloading should be 24 hours or
less.
•
When downloading image files and audio files
recorded for a channel, set the time range of the
download schedule to 10 hours or less. 
•When an error message is displayed, refer to
Check the Download Status on page 114.
HD300
Step 6
Click the [OK] button. 
						

							67
Save as a Still Image File (JPEG)
It is possible to save the live image or recorded image of the recorder as a JPEG image file. 
Step 1
Display the images from the desired recorder.
Refer to Monitor Live Images on page 41 or Play
Recorded Images on the Recorder on page 52 for
descriptions of how to display images.
Note:
Saving an image as a JPEG is available only when
images are displayed on a single screen.
Step 2
Select Save as JPEG file(S)… from File(F) on the
menu bar or click the [Save as JPEG file] button on the
tool bar.
The Save as JPEG file window will be displayed.
Perform the following settings:
qFolder where the file is to be saved
Designate the folder where the file is to be saved.
wFile name
Enter the name of the file to be saved. The default
name to be given is as follows:Example: RECORDERA_1_20051008110340.jpg
(Recorder title: Recorder A, channel number: 1,
time and date: 2005/Oct/8, from 11:03:40)
Note:
When Camera is selected for Live image recep-
tion, the time and date part of the default name will
be given from the clock of the PC.
e[Save] button
Click this button to save the file in the designated
folder and close the Save as JPEG file window.
r[Cancel] button
Click this button to cancel the file save and close
the Save as JPEG file window.
Step 3
Designate the folder and click the [Save] button.
The still image file will be saved with the given name in
the designated folder.
Notes:
•The image to be saved is the image displayed in
step 2.
•The image will be saved with the same size that it
had when transferred from the recorder.
•It is possible to save an image as JPEG image file
on the search result list window.
q
w
r e 
						

							68
Print
It is possible to print an image of live images or recorded images from the recorder.
Step 1
Display the images from the desired recorder.
Refer to Monitor Live Images on page 41 or Play
Recorded Images on the Recorder on page 52 for
descriptions of how to display images.
Step 2
Select Print(P)… from File(F) on the menu bar or
click the [Print] button on the tool bar.
The Print window will be displayed.
Note:
Printing is available only when images are dis-
played on a single screen.
Step 3 
Perform the print settings and click the [Print] button on
the Print window.
The displayed image will be printed.
Notes:
•The image to be printed is the image displayed in
step 2.
•It is possible to print an image on the search result
list window.
•When Camera is selected for Live image recep-
tion, the current time and date of the clock of the
PC will be printed. 
						

							69
Check the Log of the Recorder
The following logs can be checked.
•Event log (event occurred time and details)
•Error log
•Access log
•Network log
Obtain the log from the recorder
Step 1
Display live images from the desired recorder from
which the log was obtained.
Refer to Monitor Live Images on page 41 or Play
Recorded Images on the Recorder on page 52 for
descriptions of how to display images.
Step 2
Select Recorder log(R)… from View(V) on the
menu bar or click the recorder log button. The
Recorder log window will be displayed. Select a
desired tab from [Event log], [Error log], [Access log]
and [Network log].

Step 3
Click the [Save as(S)…] button.
Designate the file name and the directory where the
file is to be saved. The event log will be saved as a
CSV format file.
Note:
When the application has failed to obtain the log
from the recorder, a message window will be dis-
played.
If the message window is displayed even after
repeating step 2, check whether the recorder is
connected and located in the registered IP address
or the host name by performing the connection
test.
d 
						

							70
Operate the Recorder
Start/stop the manual recording
Step 1
Displays the images from the desired recorder.
Refer to page 43 for descriptions of how to display live
images.
Step 2
Click the [RECORDER] control tab.
The recorder control panel will be displayed.
Step 3
Click the shutter on the recorder control panel. The
[REC] button and the [REC STOP] button will be dis-
played.
Step 4
Click the [REC] button.
Recording will start and the [REC] indicator will light
red.
Note:
When the version of the recorder in use is the fol-
lowing, it is impossible to recognize which channel
is currently being recorded. (When recording starts
on a channel, the REC indicators of all channels
will light.) Refer to the operating instructions of the
recorder for how to check the version of the
recorder.
: Any version
WJ-ND300: Older than ver. 3.00

Step 5
Click the [REC STOP] button.
The recording will be stopped and the [REC] indicator
will go off.
When stopping manual recording while another record-
ing with a different recording mode (eg. event record-
ing) is being performed, the [REC] indicator will remain
lit and the other recording will continue. Refer to the
Network Operating Instructions (PDF) of the recorder
for further information about the recording mode.
HD300
HD300