Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

							71
Copying (Duplicate)
It is possible to manually copy (duplicate) the recorded images to the HDD copy area or the external recording
device (DVD-RAM disk, DVD-R disk, CD-R disk, SD card, external HDD)  connected to the recorder.
HD300
Step 1
Displays the images from the desired recorder.
Refer to page 43 for descriptions of how to display live
images.
Note:
When another user is copying or the current copy-
ing is not yet completed, it is impossible to start any
new copying. Check that the [COPY] indicator is
not lit.
When the [COPY] indicator is lit, copying is being
performed.
Step 2
Click the [RECORDER] control tab.
The recorder control panel will be displayed.
Step 3
Click the [COPY] button.
The copy window will be displayed.
Note:
This button will become unavailable when the
recorder in use is the WJ-ND200.
Step 4
Designate the time range FROM(F) - TO(T) of the
recorded images to be copied.
Notes:
•The available time range (duration from the start
point FROM(F) to the end point TO(T)) for copy-
ing may differ depending on the model of the
recorder in use. Refer to the operating instructions
of the recorder in use.
•Do not designate a time range wider than the time
range described on the operating instructions.
Step 5
Select the camera channels used to record images to
be copied.
Note:
To select all the camera channels, check the ALL
(A) box. To select only the desired camera chan-
nels, check the Per camera(P) box. Check the
boxes of the desired camera channels from which
images are to be copied. 
						

							72
Step 6
Select the disk drive to be used from the following.
Notes:
•
When selecting COPY1(1) or COPY2(2), check
the external recording device is connected to the
respective port.
• When the recorder in use is the WJ-ND300, it is
impossible to select COPY1(1) and COPY2(2).
Step 7
Click the [OK] button.
Copying will start and the [COPY] indicator lights
green.
HD300
Notes:
• The [COPY] indicator will not light immediately after
the [OK] button is clicked.
• When another user is accessing the destination
areas for copying, it is impossible to start any new
copying.
• Even though the auto copy function is set to be
performed, it is impossible to start any new copying
when another user is copying or the current copy-
ing is not yet completed.
d 
						

							73
Cancel the alarm action
It is possible to reset the alarm actions.
Step 1
When an alarm has occurred and the [ALARM RESET]
indicator is lit red, click the [ALARM RESET] button to
cancel the alarm actions.
The alarm actions will be canceled and the [ALARM
RESET] indicator will go off.
Note:
It is impossible to reset the alarm status display
when displaying images on a 9-/16-split screen.
d 
						

							74
Perform the settings of the recorder using a web browser
It is possible to access the setup page of the recorder via a network using the web browser.
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder for which
the settings are to be performed and select Open
recorder setup(S)… from the pop-up menu.
The web browser will start. Refer to the Network
Operating Instructions (PDF) and the Network Setup
Instructions (PDF) of the recorder for descriptions of
how to perform the settings of the recorder using the
web browser.
Notes:
•The setup menu of the recorder will be displayed in
the web browser window.
•Instead of the recorder setup menu, a white screen
will be displayed when logging into the recorder
with a user level that is not allowed to access the
setup menu.
d 
						

							75
Display/edit text information
It is possible to attach text information to the recorded images.
Up to 200 characters can be entered.
Step 1
Playback of a recorded image will be performed.
Refer to page 52 for descriptions of how to play the
recorded images.
Step 2
Pause playback by clicking the [Pause] button.
Step 3
Click the [TEXT] button on the recorder control panel.
Text information attached to the paused playback
image will be displayed in the text information window.
Step 4
Edit text information.
About the available characters
The following characters can be entered:
A B C D E F G H I J K L M N O P Q R S T U V W X Y
Z a b c d e f g h i j k l m n o p q r s t u v w x y z 0 12 3
4 5 6 7 8 9 !  # $ % &‘ ( ) * + ,- . / : ; < = > ? @ [  ] ^ _ `
{ | } ~ (space)
Step 5
Click the [Save(S)] button. 
						

							76
Operation Windows in the Local Mode
qTitle bar
The title of the main application will be displayed.
wMenu bar
The menu items will be displayed.
eTool bar
The buttons of tools will be displayed.
rList display area
The list of downloaded image files or alarm logs will
be displayed. (page 78)
tStatus bar
Displays the latest alarm status of the recorder or
information of a disk designated as storage for
downloaded images such as available disk space.
The recorder title and the camera title of the
images currently playing will also be displayed.y[Alarm log] button
Click this button to display the alarm logs.
(page 79)
u[File list] button
Click this button to display the list of the files.
(page 78)
i[List view] button
Click this button to change the display form to the
list form when the list with thumbnail form is dis-
played. (page 78)
o[Thumbnail view] button
Click this button to change the display form to the
list with thumbnail form when the list form is dis-
played. (page 87)
List display window
y
r
t
ui
o q
e w 
						

							77
(1) Tool bar
q[List view] button
Click this button to bring up the list display window
when displaying another window, such as the sin-
gle file playback window, in the local mode. (page
76)
w[1 image file playback] button
The 1-file playback window will be displayed.
(page 81)
e[4 image file playback] button
The 4-file playback window will be displayed.
(page 84)
r[Filter setup] button
Click this button to display the filter setup window.
(page 90)
t[Filter] button
Click this button to turn on/off the filtering.
(page 91)
y[Jump] button
Click this button to display the jump window.
(page 97)u[Import a motion image file] button
It is possible to import files of recorded motion
images from an external source to play them back
on this software. (page 98)
i[Save as a motion image file with viewer soft]
button
Click this button to save a part of the downloaded
recorded images with the viewer software.
(page 99)
o[Save as JPEG file] button
Click this button to save the recorded images cur-
rently playing as a still image. (page 101)
!0[Print] button
Click this button to print an image of live images or
recorded images from the recorder. (page 102)
!1[Delete] button
Click this button to delete the downloaded files.
(page 88)
!2[Network mode] button
Click this button to run this application in the net-
work mode. (page 22)
!3[Local mode] button
Click this button to run this application in the local
mode. (page 22)
qwertyuio!0!1!2!3
(2) Status bar
Refer to page 35 about the status bar. 
						

							78
(3) List display window 
qFile status icon
The icon displayed next to the recorder title indi-
cates whether the file is being played or not.
wRecorder
The recorder title from which the file was down-
loaded will be displayed.
eCH
The camera channel from which the image was
recorded will be displayed.
rFROM*
The start time and date when the image was
recorded will be displayed.
tTO*
The end time and date when the image was
recorded will be displayed.
* The time and date will be followed by an asterisk [
*]
when daylight saving is applied.yREC event
When the files were downloaded from the recorder
using the alarm notification transmission, the
recording event type will be displayed.
If the file is the image recorded on the pre-record-
ing area on the hard disk drive, the recording event
type will not be displayed.
uAudio 
When an audio file is attached to the recorded
image, Added will be displayed. (page 94)
When no audio file is attached, None will be dis-
played.
HD300
HD300
q
wertyuio!0
Icons
(New)
(Played)Descriptions
The file with this icon is not played after being downloaded.
The file with this icon has been played before. 
						

							79
Indications iType
The download method of the file will be displayed.
SCHEDULE
MANUAL
Alarm 
ND300
FTP
ImportDescriptions
The file was downloaded by the schedule download. (page 136)
The file was downloaded by manual download. (page 64)
The image file recorded at an alarm occurrence was downloaded by the alarm notifi-
cation with Panasonic protocol. (page 111)
The file was downloaded using the FTP server transmission to download.(page 123)
The motion image file was imported from an external source (page 98).
oComment
The text information attached to the recorded
image will be displayed. (page 88)!0MAC Address
The MAC address of the recorder from which the
file was downloaded will be displayed. When the
image file does not have a MAC address, no MAC
address will be displayed. 

werty
q
qPlayback icon
Indications
No iconDescriptions
The image file is ready to be played. Playback of the recorded images will start by
double clicking this icon.
The download process of the image file is not yet complete. 
						

							80
wRecorder
The title of the recorder connecting the camera that
detected the alarm occurrence will be displayed.
eCH
The number of the camera channel connecting the
camera that detected the alarm occurrence will be
displayed.
rTime & Date*
The time and date of the event occurrence will be
displayed.
tREC event
An event type will be indicated.
If the file is the image recorded on the pre-record-
ing area on the hard disk drive, the recording event
type will not be displayed. Refer to the Operating
Instructions of the recorder about the pre-recording
area on the hard disk drive
The time and date will be followed by an asterisk [
*]
when daylight saving is applied.
yMAC Address
The MAC address of the recorder that detected the
alarm occurrence will be displayed. When the
image file does not have a MAC address, no MAC
address will be displayed.
HD300