Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

							121
Indications (Logs) Descriptions
Download failed. Filed when failed to connect to the recorder. Check that the recorder is con-
nected correctly by using the connection test.
File name already exists. Rename
and save. User authentication upon recorder
access failed.
No file found for download.
Download images started.
Download interrupted.
Download failed. Moved to end of
list.
Download failed. Moved to failed
download list.
Download was successful.
File name already exists. Overwrite
the existing file.
Alarm download request registered.
Failed to save download files to the
designated folder.Filed when failed to connect to the recorder. Check whether the administra-
tor password of the recorder and the administrator password registered on
the recorder registration window are exactly the same.
Filed when the images recorded in the designated time range were not
found. Confirm whether the designated data was recorded.
Filed when downloading of the images recorded in the designated time
range was complete.
Filed when downloading of the images was interrupted by the user.
Filed when failed to download. The failed download information will be
added to the end of the download list.
Filed when failed to download. The failed download information will be
added to the failed download list.
Filed when downloading of the images recorded in the designated time
range was completed.
Filed when saving a file with a number-suffixed default name because the
same file name was found in the designated folder where the file was to be
saved.
Filed when saving the file by overwriting the same file name that was found
in the designated folder where the file was to be saved.
Filed when the alarm download information was registered in the down-
loader.
Displayed when failed to save downloaded files to specified location.
Download started. Filed when the connection to the recorder was started.
Close the downloader window
Step 1
Select Exit(X) from File(F) on the menu bar or click
the [Close] button.
The downloader window will be closed.Note:
Even though the downloader window is closed, the
downloader will still be active. Refer to page 113
for descriptions of how to exit the downloader. 
						

							122
Settings of the Recorder ADMIN ADMIN
It is necessary to register the recorder to play or download recorded images from the recorder. It is possible to regis-
ter up to 100 recorders.
Notes:
•Do not register a single recorder using multiple names. Otherwise, the alarm notification function will not work
and other functions may not work properly.
•It is necessary to perform the connection test to complete the recorder registration. The connection test checks
whether the recorder is connected and located in the registered IP address or the host name. If the connection
test fails, registration of the recorder cannot be completed.
Registration of the recorder
Step 1
Display the operation window in the network mode.
Note:
If the main application has not started, start the
main application and log in as the administrator.
Step 2
Select Recorder registration(R)... from the Setup
(O) on the menu bar.
The recorder registration window will be displayed.Perform the settings for the following items.
qRecorder title(T)
Give a name to the recorder. The name entered
here will be displayed on many windows. Use a
unique name for the recorder.
Enter up to 16 alphanumeric characters. The fol-
lowing characters are not available (\, /, :, *, ?, , , |).
wModel number
This is the model number of the recorder. The
model number of the recorder that was obtained
when running the connection test will be displayed
here. Before running the connection test,
Unknown will be displayed, which indicates
recorder registration has not been completed.
eAddress(A)
Enter the IP address or the host name of the
recorder. Enter up to 255 alphanumeric characters.
rHTTP port number(P)
Specify the HTTP port number of the recorder. 
A number from 1 - 65535 is available.
It is unnecessary to change it for normal use.
qw
r
y
i
!0
!2e
t
u
o
!1
!3
!4
!5
!6!7!8 
						

							123
tFTP port number(O)
Specify the FTP port number of the recorder. 
A number from 1 - 65535 is available.
It is unnecessary to change it for normal use.
Important:
An FTP port needs to be set up so that the port
becomes usable for changing the FTP port number
to one other than 21 when the Windows
®XP
Professional or Home Edition SP2 is run and the
firewall is set to ON. Refer to page 143 for excep-
tional settings for the firewall.
yAdministrator Name(N)
Enter the same name set for ADMIN of the
recorder.
It is fixed to ADMIN.
uAdministrator Password(D)
Enter the same password set for ADMIN pass-
word of the recorder. When a password is entered
that is different to the ADMIN password of the
recorder, it is impossible to log into the recorder.
Enter 4 to 8 alphanumeric characters.
Entered characters for the ADMIN password will
be displayed as *.
This is the administrator password.
iEnter password again to confirm.(C)
Enter the same password entered for
Administrator password(D) for confirmation.
oSave to(S)
Designate the directory where the downloaded files
from the recorder are to be saved. At the default
setting, it is set. to C:\WV-AS65DataFile\Data_n
(n=001-999).
!0Use an HTTP proxy server(H)
Check the box when using an HTTP proxy to con-
nect to the recorder.
It is necessary to enter the address of the HTTP
proxy in the option window. (Refer to page 142.)
!1Use an FTP proxy server(F)
Check the box when using an FTP proxy to down-
load the images.
It is necessary to enter the address of the FTP
proxy in the option window. (Refer to page 142.)
!2Alarm(M)
Set the alarm checkbox to ON when receiving an
alarm notification and select either protocol from
the following.
HD300
HD300
!3Panasonic Alarm Protocol(L)  *
The Panasonic protocol will be used.
PRE(R):
Select a recording duration prior to the occurrence
of an alarm. Available durations are OFF, 5 s and
10 s.
POST(B):
Select a recording duration after the occurrence of
an alarm. Available durations are OFF, 5 s and
10 s.
!4FTP Send by Alarm(W)*
The FTP protocol will be used.
Directory(V):
Designate the destination directory where the
image file transferred from the recorder is saved. 
* To activate the alarm function, it is necessary to set
up each recorder. Especially when using the
Panasonic alarm protocol function, number of the
event action and the camera number used for
recording must be same. Refer to the operating
instructions of the recorder for further information.
!5Periodic download of error log
Select an acquisition interval for error information
to download from the recorder. The available times
are OFF, 5 min, 10 min, 15 min, 30 min and 60
min.
Perform settings on the recorder side to activate
the alarm notification with Panasonic Alarm
Protocol.
!6[Connection test(E)…] button
The connection test checks whether the recorder is
connected and located in the entered IP address or
the host name for Address(A). Click this button
after completing the settings on this recorder regis-
tration window.
!7[OK] button
Click this button to save the settings and close the
recorder registration window.
!8[Cancel] button
Click this button to cancel the saving of the edited
settings and close the recorder registration window.
ND300
HD300
ND300 
						

							124
Note:
When 100 recorders are registered, a message
window that says Reached the maximum registra-
tion number. Cannot register. will be displayed.
Step 3
Complete settings above.
Step 4
Click the [Connection test(E)...] button.
The Connection test window will be displayed.2. Go to step 8.
Step 7
When the message of Connection failed is displayed
1. Check the description on the screen.
2. Click the [Close(C)] button.
The connection test window will be closed.
3. Return to the recorder registration window and
check the entered settings.
4. Retry the connection test after checking the set-
tings.
Step 8
Register the recorder.
The model number of the recorder (obtained by the
connection test) will be displayed in the recorder regis-
tration window. Click the [OK] button to complete the
registration. Before starting the connection test, configure the NW
Camera settings of the recorder. Information of the
settings (compression method) will be obtained from
the recorder when the connection test is carried out,
and it will be saved in this software 
Step 5
When the message of Connection succeeded is dis-
played, go to step 6.
When the message of Connection failed is displayed,
go to step 7.
Step 6
When the message of Connection succeeded is dis-
played
1. Click the [Close(C)] button.
The Connection test window will be closed and
the recorder registration window will be displayed
again.
ND300
d 
						

							125
The message window may be displayed when the [OK]
button is clicked. When the message window is dis-
played by clicking the [OK] button, refer to the page
151 and follow the descriptions.
Note:
When the [OK] button is clicked without performing
the connection test, the recorder registration will
not be completed.
It is impossible to operate the recorder until the
obtained model number using the connection test
is registered. A message will be displayed when
trying to operate without completing the registra-
tion.
Refer to page 129 for the descriptions of how to
register the recorder.
Step 9
Check whether the recorder is registered correctly.
Click the [RECORDER] tab on the operation window in
the network mode. When the icon of the registered
recorder is displayed in the tree view, the recorder is
registered correctly.
Perform the settings of the cameras
It is possible to edit the title, type  of the camera connected to the recorder, or the Live image reception set-
ting  . The camera title will be displayed to identify cameras in each window of the main application. The icon
of the camera differs depending on the type of the camera.
The camera information obtained by the connection test will be applied.
There are 2 methods to perform the settings of the cameras:
•Perform the settings of all the cameras connected to the recorder (page 126)
•Perform the settings of the cameras independently (page 128)
Notes:
•When the registration of the recorder is not completed, it is impossible to perform the settings of the connected
cameras.
•When the settings are edited while displaying images, the edited settings will not be applied until the camera
channel is allocated to the image display area again.
ND300
ND300
HD300 
						

							126
Perform the settings of all the cameras
connected to the recorder
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder and select
Camera setup(C)... from the displayed pop-up menu.
The Camera setup window will be displayed.
d
!0o
q
w
e
r
ND300
!0o
i
tyu
q
w
e
r
HD300
Perform the following settings:
qRecorder title
The title of the recorder will be displayed.
wRecorder model number
The model number of the recorder will be dis-
played.
e[1CH-16CH/17CH-32CH] tabs
The lower or higher numbered channels will be dis-
played by clicking these tabs.
Note:
When the recorder in use is the WJ-HD300 or WJ-
ND200, only the [1CH - 16CH] tab is available. 
						

							127
rTitle
Enter the name of the camera. The default title is
CAM# (#: camera channel).
Enter up to 16 alphanumeric characters. The fol-
lowing characters are not available (\, /, :, *, ?, , , |). 
tModel number 
The model number obtained from the recorder at
the connection test will be displayed. For a camera
channel to which no camera is assigned, -- will be
displayed.
(However, this function will not work when the ver-
sion of the recorder in use is the following. Refer to
the operating instructions of the recorder for how to
check the version of the recorder.
WJ-ND300: Older than ver. 3.00 
yLive image reception 
Select Recorder or Camera to determine to how
to receive live images.
When Recorder is selected, live images will be
received via a recorder.
When Camera is selected, live images will be
received from a camera directly.
Important:
•Even when Camera is selected, it is necessary to
register the camera in the recorder. Refer to the
operating instructions of the recorder in use for how
to register the camera.
•When Camera is selected, live images can be
monitored even when OFF is selected for LIVE
VIDEO on the recorder.
Note:
Depending on the model or the version of the
recorder/camera in use, it may be impossible to
select Camera. The applicable models/versions
are the following.
WJ-ND300: Ver. 3.00 or later
WJ-ND200: Ver. 1.00 or later
WV-NP472: Ver. 2.20 or later
WV-NS32x: Ver. 2.20 or later
WV-NW47x: Ver. 2.20 or later
WV-NP24x: Ver. 1.20 or later
WV-NP100x: Ver. 1.20 or later
WJ-NS202: Ver. 1.00 or later
uCOMPRESSION 
Select JPEG or MPEG-4 to determine the
image compression method.
When JPEG is selected, live images can be mon-
itored in JPEG format.
When MPEG-4 is selected, live images can be
monitored in MPEG-4 format.
Notes:
•This setting is available only when the model num-
ber of the camera is WV-NP24x, WV-NP100x or
WV-NS202, and also when Camera is selected
for Live image reception.
•The image compression method obtained from the
recorder at the connection test will be displayed
when the model number of the camera is not WV-
NP24x, WV-NP100x or WV-NS202, or when
Recorder is selected for Live image reception.
iType 
Select PTZ Camera or Fixed Camera from the
pull-down.
When PTZ Camera is selected, it is possible to
carry out all operations of the camera.
When Fixed Camera is selected, it is possible to
control the camera except panning/tilting opera-
tions, turning on/off the auto functions and the pre-
set function.
o[OK] button
Click this button to save the settings and close the
camera setup window.
!0[Cancel] button
Click this button to cancel the saving of the edited
settings and close the camera setup window.
Step 4
Click the [OK] button after completing the settings for
each camera channel.
The message window may be displayed when the [OK]
button is clicked. When the message window is dis-
played by clicking the [OK] button, refer to the page
152 and follow the descriptions.
HD300
ND300
ND300
ND300 
						

							Step 3
Right click the icon of the desired camera.
Changing the camera type 
1. Select Change camera type(T) from the displayed
pop-up menu.
The pop-up menu will be displayed.
2. Select PTZ Camera(P) or Fixed Camera(F) from
the submenu.
Changing the camera title
1. Select Rename(R) from the displayed pop-up
menu. The selected camera title will be highlighted
and can now be edited.
2. Enter the new name for the camera title.
HD300
128
Perform the settings of the cameras
independently
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorders will be displayed in the tree view.
The recorder and the connected cameras will be dis-
played in the tree view by clicking [+].
ND300
HD300 
						

							129
Edit the registered recorder information
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder for which
the registered information is to be edited and select
Edit (E)... from the displayed pop-up menu.
The recorder registration window will be displayed.
Step 4
Edit the registered information and click the [OK] but-
ton.
The edited information will be saved and the recorder
registration window will be closed.
Notes:
•When any of the following items are edited, it is
necessary to perform the connection test again:
Address(A)
HTTP port number(P)
FTP port number(O)
Administrator Name(N)
Administrator Password(D)
Communication setup (Use an HTTP proxy
server(H) or Use a FTP proxy server(F))
When a camera is added/deleted using the
NW Camera setting
•A message window will be displayed after the con-
nection test.
When the [Yes] button is clicked, the recorder will
be registered as a new one discarding all recorder
information previously registered. Other settings
(schedule, favorite, etc) and image files related to
this recorder will also be deleted. 
When the [No] button is clicked, the message will
close and the recorder registration window will be
displayed.
ND300 
						

							130
Delete the registered recorder information
Step 1
Display the operation window in the network mode.
Step 2
Click the [RECORDER] tab.
The recorder and the connected cameras will be dis-
played in the tree view.
Step 3
Right click the icon of the desired recorder and select
Delete(D)... from the displayed pop-up menu.
The deletion confirmation window will be displayed.
Step 4
After reading the message in the window, click the
[Yes] button to delete the selected recorder.
Deletion of the selected recorder will start. The dele-
tion status window will be displayed during deletion of
the recorder.
The deletion status window will close when the dele-
tion is complete.
Note:
When deleting the recorder information, all images
downloaded from that recorder will be deleted. Any
schedule settings and favorite settings relevant to
that recorder to be will also be deleted.
d