Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  231
Considerations
•N/A
Intercom Calling
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System provides two methods of intercom calling: 
•Voice Calling: Extension calls are connected immediately, without a ringing tone.
•Tone Calling: A ringing tone is sent to the called extension.
Extension Class of Service (COS) programming determines whether the default for the originating 
extension is voice or tone...

232 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
• You cannot change from voice call to tone call.
Last Number Redial
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Last Number Redial allows you to automatically redial the last number dialed by pressing the 
REDIAL key.
Operation
To automatically redial the last number dialed:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  233
Operation
To leave a message waiting indication:
To answer a message waiting indication (callback):
To cancel a Callback Message:
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Message Wait set/cancel)
• FF1-0-03: Extension COS (Priority Message Wait set/cancel)
• FF1-2: Dial Plan
• FF3: Extension COS
Considerations
• The System has priority message waiting for 3rd-party Voice Mail....

234 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Onhook Dialing
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Onhook Dialing allows users to dial without lifting the handset. However, the Digital Single Line 
Telephone (DSLT) does not have a microphone so you must lift the handset to talk.
Operation
To use onhook dialing:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Offhook Signaling
CPC-96, CPC-288, and CPC-576 Version 1.0...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  235
Note:For details about handling multiple calls, see “Call Hold” on page 214.
Hardware Requirements
•N/A
Related Programming
• FF3: CO Off-Hook Signal.
Considerations
• The CO call type may be either multiple ring, direct, or camp-on.
• The system does not send the offhook signal under the following conditions:
•   During a conference call
•   During an OHVA or Busy override
•   Data Privacy is enabled
•   the...

236 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1 0 03 (System): Extension COS OHVA Originate
• FF1 0 03 (System): Extension COS OHVA Receive
• FF3 (Extension): Extension COS Assignments
• FF4: FF Key Assignments
Considerations
• If Onhook Transfer is enabled, the held call is transferred as soon as the extension sending the 
OHVA hangs up.
• If the transferred call is not answered immediately, it will queue...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  237
Meet-Me Answer
To answer a page using Meet-Me Answer:
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging. 
Related Programming
• FF1-0-02: Paging Override 
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made to...

238 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
Considerations
• The second extension called using the Reset Call feature must have the same number of digits as 
the first extension.
• If you program the System for Reset Call, the following features are not available: Camp-on 
(Ext. no. + 2), Callback Request...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  239
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters. The following table reflects which keys to 
use.Action Result
1.   Lift the handset or press the ON/OFF
 key....

240 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
* Indicates that the digits that follow are either a feature access code or an extension 
number. (Not needed if your System is set for Intercom Level.) See Note below.
** Indicates that the digits that follow are for an outside number and the System should 
seize the next available trunk when dialing. (Not needed if your System is set for CO 
Level.) See Note below.
Note:The System has two levels - CO Level...