Panasonic Digital Business System 576 Technical Manual
Here you can view all the pages of manual Panasonic Digital Business System 576 Technical Manual. The Panasonic manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 271
Section 700 - Operation Chapter 7. SLT Features 576-13-700 DBS 576 (USA), Revised 6/11/98 271 • FF1-0-03: Extension COS (Broker’s Hold or Conference) • FF3: Extension COS Considerations • Broker’s Hold must be disabled to establish a conference call. Eight-Party Conferencing With the optional Conference Card installed, up to 8 parties can be included in a conference call. One of the parties can be a CO line (i.e., 8 extensions or 7 extensions and 1 CO line). Operation To establish an Eight-party...
Page 272
272 DBS 576 (USA), Revised 6/11/98 576-13-700 Chapter 7. SLT Features Section 700 - Operation •N/A Related Programming • FF1-0-03: Extension COS (8-party Conference) • FF3: Extension COS (Broker’s Hold or Conference) Considerations • A Conference Card (VB-44120) must be installed in the System in order to use Eight-party Conferencing. • Broker’s Hold must be disabled to establish a conference call. • If the originating party hangs up, the conference call will be disconnected. If any other party hangs...
Page 273
Section 700 - Operation Chapter 7. SLT Features 576-13-700 DBS 576 (USA), Revised 6/11/98 273 To set DND for another extension: To cancel DND for another extension: Hardware Requirements •N/A Related Programming • FF1-0-03: Extension COS (Manual DND Override Send) • FF1-0-03: Extension COS (Forced DND Override) • FF1-0-03: Extension COS (DND Set/Clear) • FF1-0-03: Extension COS (DND Set/Clear Other) • FF1-2: Dial Plan • FF3-0: Extension COS Considerations • Forced DND override is available. • DND...
Page 274
274 DBS 576 (USA), Revised 6/11/98 576-13-700 Chapter 7. SLT Features Section 700 - Operation Flash Send CPC-96, CPC-288, and CPC-576 Version 1.3 Description Flash send allows you to send a flash to a CO line. Operation To send a flash on a CO line: Related Programming • FF1-2: Dial Plan • FF5-5: Hot Line Considerations •N/A Hot Line CPC-96, CPC-288, and CPC-576 Version 1.0 Description Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number simply by lifting...
Page 275
Section 700 - Operation Chapter 7. SLT Features 576-13-700 DBS 576 (USA), Revised 6/11/98 275 •N/A Intercom Calling CPC-96, CPC-288, and CPC-576 Version 1.0 Description The System provides two methods of intercom calling: • Voice Calling: Extension calls are connected immediately, without a ringing tone. •Tone Calling: A ringing tone is sent to the called extension. Extension Class of Service (COS) programming determines whether the default for the originating extension is voice or tone calling....
Page 276
276 DBS 576 (USA), Revised 6/11/98 576-13-700 Chapter 7. SLT Features Section 700 - Operation Last Number Redial CPC-96, CPC-288, and CPC-576 Version 1.0 Description Last Number Redial allows you to automatically redial the last number dialed. Operation To automatically redial the last number dialed: Hardware Requirements •N/A Related Programming • FF1-0-03: Extension COS (Intercom Redialing) • FF3: Extension COS Considerations • Extension Class of Service (COS) determines whether Last Number Redial can...
Page 277
Section 700 - Operation Chapter 7. SLT Features 576-13-700 DBS 576 (USA), Revised 6/11/98 277 Hardware Requirements •N/A Related Programming • FF3: CO Off-Hook Signal • FF1-1: Off-Hook Signal Timer Considerations • The CO call type may be either multiple ring, direct, or camp-on. • Offhook signaling is not supported for an ISDN terminal. • The System does not send the offhook signal under the following conditions: • During a conference call • During an OHVA or Busy override • Data Privacy is...
Page 278
278 DBS 576 (USA), Revised 6/11/98 576-13-700 Chapter 7. SLT Features Section 700 - Operation Offhook Voice Announce All Versions Description You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice Announce (OHVA) feature to make an announcement. Operation To make an OHVA : Hardware Requirements •N/A Related Programming • FF1 0 03 (System): Extension COS OHVA Originate • FF1 0 03 (System): Extension COS OHVA Receive • FF3 (Extension): Extension COS Assignments •...
Page 279
Section 700 - Operation Chapter 7. SLT Features 576-13-700 DBS 576 (USA), Revised 6/11/98 279 Operation To leave a message waiting indication: To answer a message waiting indication (Callback): To cancel a Callback Message: Hardware Requirements •N/A Related Programming • FF1-0-03: Extension COS (Message Wait set/cancel) • FF1-0-03: Extension COS (Priority Message Wait set/cancel) • FF1-2: Dial Plan • FF3: Extension COS Considerations • The System has priority message waiting for 3rd-party voice mail....
Page 280
280 DBS 576 (USA), Revised 6/11/98 576-13-700 Chapter 7. SLT Features Section 700 - Operation Paging CPC-96, CPC-288, and CPC-576 Version 1.0 Description The System allows you to make both internal and external pages and announcements. Internal pages are made via the System’s key telephone speakers. External pages are made through the speakers of an external paging system connected to the System. Paging calls can be answered from any extension using the Meet-Me Answer feature. Operation To make a...