Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  281
• Only one page may be performed at a time. If you attempt to make a page while another 
extension is paging, you will receive a busy signal unless your system allows Paging Override.
Reset Call
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply 
pressing the last digit of the new extension number.
Operation
To use...

282 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
Personal Speed Dial
You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored 
in PSD bins numbered 80-99. 
Operation
To assign PSD numbers:
To dial a PSD number by entering the speed dial bin number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
•N/AAction Result
1.   Lift the handset. Intercom dial tone
2.    Enter the Speed Dial Set/Clear code...

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  283
Considerations
• Storing a new number erases any previously stored data.
• Speed Dial numbers can contain up to 24 characters.
• Single Line Telephone SLT can only enter 0, 1-9, *, and #. If a pause, MCO code, intercom level, 
Dial Pulse (DP) - Dual Tone Multifrequency (DTMF) code, or SSD code needs to be 
programmed, use User Maintenance to program the speed dial.
System Speed Dial
You can store frequently...

284 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-0-15, 16, & 17 SSD Blocks
• FF1-0-02 SSD Digits
• FF1-0-03 Extension COS (SSD Assignment)
• FF8-1-02: SSD Number
• FF8-1-02: SSD Name
Considerations
• The system can be programmed to allow SSD Numbers to override toll restrictions.
Speed Dial Linking
You can automatically link together up to 6 SSD numbers in 1 PSD bin to handle telephone numbers 
longer than...

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  285
Timed Reminder Call
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Your telephone can act as an alarm clock with the Timed Reminder Call feature.
Operation
To set the Timed Reminder Call feature:
To cancel the Timed Reminder Call feature:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
• An alarm tone (default = 60 seconds) will be issued at the specified time.
• An extension can have...

286 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
Trunk Access
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System supports the following ways to seize an idle trunk to make an outside call:
• Direct Trunk Access
• MCO Trunk Access
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access 
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
Hardware...

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  287
Operation
To seize an idle trunk:
Hardware Requirements
•N/A
Related Programming
• FF1: MCO Access 
• FF5-2: MCO Trunk Group (Outbound)
• FF7: ARS/TRS
Considerations
• The System supports up to 576 outside lines in a six-cabinet configuration. These lines can be 
divided into 99 different trunk groups.
• Each trunk group can support up to 50 outside lines.
• Each MCO Tenant Group can have up to 5 MCO trunk...

288 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation
Trunk Queuing
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
When you try to originate a call by MCO (enter 
9) and all outside lines in a trunk group are busy, the 
System can call you when a line becomes free. Simply pick up the handset and dial the telephone 
number when the Trunk Callback alert tone rings.
Operation
To set Trunk Queuing:
To respond to the Trunk Callback alert tone:
Hardware...

Section 700 - Operation Chapter 7. SLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  289
Walking TRS Class of Service
Walking TRS Class of Service allows an extension user to “carry” his or her toll restrictions to another 
phone.
Before the Walking TRS Class of Service feature can be used, a Walking Class of Service code must 
be entered at your extension before using dialing privileges at another extension.
Operation
To use a Walking Class of Service code:
Hardware Requirements
•N/A
Related...

290 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 7. SLT Features Section 700 - Operation