Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  211
Operation
To set Call Forwarding-All Calls:
To cancel Call Forwarding-All Calls:
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.Action Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   Enter the appropriate Set Call Forwarding code:
•   For your extension, enter 721
.
•   For another extension, enter 741
.
3.   If...

212 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Operation
To set Call Forwarding - Busy:
To cancel Call Forwarding - Busy:
Call Forwarding - No Answer
When Call Forwarding - No Answer is set, a call will ring until the Call Forward - No Answer timer 
expires. When the timer expires, the unanswered call is forwarded.Action Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   Enter the appropriate Set Call Forwarding code:
•   For...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  213
Operation
To set Call Forwarding - No Answer:
To cancel Call Forwarding - No Answer:
Call Forwarding and Do-Not-Disturb
The System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for your 
own extension in one step.
To cancel Call Forwarding and DND:Action Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   Enter the appropriate Set Call Forwarding code:
•...

214 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Call Forward/All/Busy/No-Answer and DND Cancel)
• FF1-0-03: Extension COS (Call Forward/All Calls)
• FF1-0-03: Extension COS (Call Forward/Busy)
• FF1-0-03: Extension COS (Call Forward/No Answer)
• FF1-0-03: Extension COS (Call Forward/Other)
• FF1-2: Dial Plan
Considerations
• Calls cannot be forwarded to an extension that already has...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  215
Operation
To place a call on System Hold: 
To retrieve a call placed on System Hold: 
To retrieve a held call on a specific trunk:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold by HOLD Key
• FF1-0-03: Extension COS (Hold Key Operation)
• FF3: Extension COS
Considerations
•N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held call from any...

216 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
To retrieve a call from Floating Hold:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold on HOLD Key
• FF1-2: Dial Plan
Exclusive Hold
With Exclusive Hold, only the extension that held the call can retrieve it. Exclusive Hold can be used 
to hold CO calls and extension calls.
Operation
To place a call on Exclusive Hold:
To retrieve a call from Exclusive Hold: 
Hardware Requirements
•N/A...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  217
Broker’s Hold
Broker’s Hold allows you to toggle between the current call and the last held call by pressing the 
HOLD key.
Operation
To place a call on Broker’s Hold:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Call Park
You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient 
of the call.
CO, Extension, and Network calls may be...

218 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transfered call park:
Hardware Requirements
•N/A
Related Programming
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• You cannot park more than one call at a time.
• No more than one Call Park Answer key may be assigned to a single telephone.
• If two calls are on...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  219
Call Pickup
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
The System allows the following types of call pickup:
• Extension Group Pickup
• Extension Direct Pickup
• Trunk Group Pickup 
• Trunk Direct Pickup
Extension Group Pickup
Extension Group Pickup allows you to pick up a direct ringing call (within your extension pickup 
group or in a different pickup group) without having to dial the number of the...

220 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
To use Specified Group Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-0-02: Intercom Voice Call Pickup
• FF1-2: Dial Plan
• FF5-6: Call Pickup Group Assignment
Considerations
• Extension Group Pickup - 12 / cabinet - maximum 72 group / 6 cabinet configuration
Extension Direct Pickup
Extension Direct Pickup allows you to answer a call to another extension by dialing the number of the 
ringing...