Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  171
Operation
After receiving an offhook signal during a call:
Note:For details about handling multiple calls, see “Call Hold” on page 124.
Hardware Requirements
•N/A
Related Programming
• FF3: CO Off-Hook Signal.
Considerations
• The CO call type may be multiple ring, direct, BLF Ring, or camp-on.
• The System does not send the offhook signal under the following conditions:
•   During a conference call
•...

172 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To answer an OHVA: 
To transfer a call using OHVA:
3.   Enter the OHVA feature access code (default = 8).•   
OHVA EXT XXX displays if busy 
extension called (where XXX = calling 
extension.
•   EXT LED flashes
4.   Make your announcement
Action Result
1.   Press the OHVA Split key.
Note: You must program an FF key as a split key (default = 
*71) to use this feature.Split key flashes red
2.   To return...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  173
To answer a call after it has been announced using the OHVA:
Hardware Requirements
•N/A
Related Programming
• FF1 0 03: Extension COS OHVA Originate
• FF1 0 03: Extension COS OHVA Receive
• FF3: Extension COS Assignments
• FF4: FF Key Assignments
Considerations
• The held call is transferred as soon as the extension sending the OHVA hangs up.
• If the transferred call is not answered immediately, it...

174 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To assign an System Speed Dial (SSD) numbers to a one-touch key:
To chain 2 to 6 SSD numbers to a single one-touch key:
4.   Dial the phone number to be stored.
5.   Press the HOLD key.
6.   Replace the handset or press the ON/OFF key.
Action Result
1.   Lift the handset or press the ON/OFF key. Intercom dial tone
2.   Press the PROG key.
3.   Press the one-touch key to be programmed.
4.   Press the...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  175
To assign a feature code or extension number to a one-touch key:
To check a programmed one-touch key:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD Numbers
• FF8-1: PSD Names
Considerations
• One-touch keys 1-10 are the same as Personal Speed Dial (PSDs) numbers 80-89.
Onhook Dialing
CPC-96, CPC-288, and CPC-576 All Versions
Description
Onhook Dialing is a standard feature for key...

176 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To dial onhook:
Hardware Requirements
•N/A
Related Programming
•N/A
Considerations
•N/A
Paging
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System allows you to make both internal and external pages and announcements. Internal pages 
are made via the System’s key telephone speakers. External pages are made through the speakers of 
an external paging system connected to the...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  177
Meet-Me Answer
To answer a page using Meet-Me Answer:
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging.
Related Programming
• FF1-0-02: Paging Override
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• You can assign the paging access code to a one-touch or FF...

178 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To use Reset Call to dial another extension (after a busy extension):
Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
Considerations
• The second extension called using the Reset Call feature must have the same number of digits as 
the first extension.
Ringing Line Preference
CPC-96, CPC-288,...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  179
Considerations
• If disabled in Extension Programming, you must press the line key or enter the feature code for 
incoming pick-up in order to answer a call.
Speed Dialing
CPC-96, CPC-288, and CPC-576 All Versions
Description
The System supports the following speed dial features:
• Personal Speed Dial (PSD) 
• System Speed Dial (SSD)
• Speed Dial Linking
• Speed Dial Name Assignment
Personal Speed...

180 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To dial a PSD number by entering the speed dial bin number:
To check a PSD number:
To delete a PSD number:
Hardware Requirements
•N/A
Related Programming
• FF8-1: PSD NumbersAction Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   If necessary, access an outside line. Outside dial tone
3.   Press the AUTO
 key.
OR...
Enter the Speed Dial Originate code (default = 80
).
4....