Panasonic Digital Business System 576 Technical Manual

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  121
To cancel Call Forwarding-All Calls:
Call Forwarding - Busy
When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.
Operation
To set Call Forwarding - Busy:Action Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   Enter the appropriate Cancel Call Forwarding code:
•   For your extension, enter 731
.
•   For another extension, enter 751
.
3....

122 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To cancel Call Forwarding - Busy:
Call Forwarding - No Answer
When Call Forwarding - No Answer is set, a call will ring until the Call Forward - No Answer timer 
expires. When the timer expires, the unanswered call is forwarded.
Operation
To set Call Forwarding - No Answer:Action Result
1.   Lift the handset or press the ON/OFF
 key. Intercom dial tone
2.   Enter the appropriate Cancel Call Forwarding...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  123
To cancel Call Forwarding - No Answer:
Call Forwarding-All Calls and Do-Not-Disturb
The System allows you to cancel both Call Forwarding-All Calls and Do-Not-Disturb (DND) for your 
own extension in one step.
Operation
To cancel Call Forwarding-All Calls and DND:.
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Call Forward All/Busy/No-Answer/DND Cancel)
• FF1-0-03: Extension...

124 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
• You can set Call Forwarding - All Calls while Call Forwarding - No Answer and/or Call 
Forwarding - Busy are set. Canceling one mode only affects that mode; however, the other 
modes will remain set until canceled individually.
• An auto camp-on to a busy extension will forward to the Call Forward No Answer destination. A 
manual camp-on to a busy extension will not forward.
• If Call Forwarding No...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  125
To retrieve a call placed on System Hold from an extension other than the one that put 
it there:
To retrieve a held call on a specific trunk:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold on HOLD Key
• FF1-0-03: Extension COS (Hold Key Operation)
• FF1-2: Dial Plan
Considerations
•N/A
Floating Hold
Floating Hold is a type of System Hold that allows you to retrieve a held...

126 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
To retrieve a call from Floating Hold:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Floating Hold on HOLD Key
• FF1-2: Dial Plan
• FF4: FF-Key Feature Assignment
Considerations
•N/A
Exclusive Hold
With Exclusive Hold, only the extension that held the call can retrieve it. Exclusive Hold can be used 
to hold CO calls and extension calls.
Operation
To place a call on Exclusive Hold:
To...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  127
Related Programming
• FF1-0-01: Exclusive Hold (CO Key)
• FF1-0-03: Extension COS (Hold Key Operation - System vs. Exclusive)
Considerations
• Intercom calls will be held as Exclusive when placed on hold by pressing the HOLD key.
Broker’s Hold
Broker’s Hold allows you to toggle between the current call and the last held call by pressing the 
HOLD key.
Operation
To place a call on Broker’s Hold:...

128 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To park a call on this extension:
To retrieve a call parked at the originating extension from another extension:
To park a call at another extension:
To retrieve a transfered call park:Action Result
1.   While on a call, press the 
HOLD key. •   Current call on hold
•   
CO HOLD #XX displays (where XX = 
trunk number)
2.   Enter the Call Park Hold access code (default 
771) or press 
PARK...

Section 700 - Operation Chapter 5. Key Telephone Features
576-13-700 DBS 576 (USA), Revised 6/11/98  129
Hardware Requirements
•N/A
Related Programming
• FF1 (System): Extension Park Hold Recall Timer
Considerations
• You cannot park more than one call at a time.
• Call Park fucntions can be assigned to FF keys (see “Flexible Function Keys” on page 152).
• No more than one Call Park Answer key may be assigned to a single telephone.
• A Call Park Answer key may not be assigned to the EM/24 or DSS/72...

130 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 5. Key Telephone Features Section 700 - Operation
Operation
To use Extension Group Pickup - All Calls:
To use Extension Group Pickup - External Calls:
To use Specified Group Pickup:
Hardware Requirements
•N/A
Related Programming
• FF1-0-02: Intercom Voice Call Pickup
• FF1-2: Dial Plan
• FF5-6: Call Pickup Group Assignment
Considerations
• Extension Group Pickup - 12 / cabinet - maximum 72 group / 6 cabinet configuration
• The Call Pickup Group...