Panasonic Digital Business System 576 Technical Manual

576-13-700 DBS 576 (USA), Revised 6/11/98 201
Chapter 6. DSLT Features
This chapter describes features that are available with the Digital Single Line Telephone (DSLT).
This chapter covers the following topics: 
Topic Page
Digital Single Line Telephone 203
Account Codes 203
Non-Verified Account Codes
204
Verified Account Codes
205
Attendant Group Calls 206
Auto Repeat Dial 207
Background Music 207
Busy Override 208
Callback Request 209
Call Forwarding 210
Call Forwarding-All Calls
210
Call Forwarding -...

202 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Do-Not-Disturb 228
DP to DTMF Signal Conversion 229
Flash 230
Hot Line 230
Intercom Calling 231
Last Number Redial 232
Message Waiting / Callback 232
Onhook Dialing 234
Offhook Signaling 234
Offhook Voice Announce 235
Paging 236
Meet-Me Answer
237
Reset Call 237
Speed Dialing 238
Personal Speed Dial
238
System Speed Dial
240
Speed Dial Linking
241
Timed Reminder Call 242
Trunk Access 243
Direct Trunk Access...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  203
Digital Single Line Telephone
Figure 5 illustrates the Digital Single Line Telephone (DSLT). For more information on DSLT 
operation, see the Digital SLT User’s Guide (Section 790).
Figure 5.  DSLT
Account Codes
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
You can assign account codes to clients to facilitate billing and to track call dates and times, numbers 
called, and outside line numbers used....

204 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
This feature works with Station Message Detail Recording (SMDR). During a phone call, a station 
user can silently enter an accounting or client billing code. The entered Code will display on the 
phone’s LCD as it’s dialed, so the user can tell it’s being registered. Then later, the SMDR reports will 
show the Code dialed for each call, and even sort the report by these Codes.
There are two different types of...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  205
To enter an account code during an outside call:
Verified Account Codes
Stations restricted from outside call origination by Toll Restriction Service (TRS) can be 
allowed to make outgoing calls by entering a Verified Account code that changes the TRS. 
After a call is made, the SMDR record for the call will show the verified account code.
Operation
To make an outside call that requires an account code:...

206 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
• Account Codes interact with TRS as shown in the following table:
Attendant Group Calls
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
You can call the attendant group from any extension by dialing the designated attendant number.
Operation
To call an attendant group:
Hardware Requirements
•N/A
Related Programming
• FF1-2: Dial Plan
• FF3-0: Extension Number
• FF5-0: Attendant Hunt Groups
Considerations...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  207
Auto Repeat Dial
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
If you press the 
REDIAL key while receiving busy tone on an outside call, the System automatically 
redials the number. The System continues to redial the number at set intervals
 until the called number 
answers, the caller hangs up, or the maximum of 15 redial attempts is made. 
Operation
To use Auto Repeat Dial:
Hardware Requirements...

208 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Operation
To turn Background Music on:
To turn Background Music off:
Hardware Requirements
• The music source must be purchased separately. It is not provided with the System.
Related Programming
•N/A
Considerations
•N/A
Busy Override 
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Busy Override allows you to break into one another’s outside or intercom calls to relay urgent 
information or to create...

Section 700 - Operation Chapter 6. DSLT Features
576-13-700 DBS 576 (USA), Revised 6/11/98  209
Operation
To use Extension Busy Override:
Hardware Requirements
•N/A
Related Programming
• FF1-0-01: Splash Tone (Busy Override)
• FF1-0-03: Extension COS (Manual DND Override Send)
• FF1-0-03: Extension COS (Forced DND Override)
• FF1-2: Dial Plan
• FF3: Extension COS
• FF3: Data Security
Considerations
• You cannot break in on three-party conference calls.
• The default for the Override Alert Tone is off. If...

210 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
To respond to the callback request: 
Hardware Requirements
•N/A
Related Programming
• FF1-0-03: Extension COS (Callback Request Send)
• FF1-0-03: Extension COS (Callback Request Receive)
• FF3: Extension COS
Considerations
•N/A
Call Forwarding 
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Call Forwarding allows you to send your calls to another extension, to an outside line, or to Voice 
Mail. Call...