Palm M125 Handheld Instructions Manual
Have a look at the manual Palm M125 Handheld Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 41 Palm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 7 Page 173 To select a connection type: 1. Tap the service field. 2. Tap Details. 3. Tap the Connection type pick list and select one of the following connection types: Note: If you are not sure, try PPP; if that doesn’t work, ask your Internet Service Provider or your System Administrator for the correct connection type. Idle timeout The Idle timeout setting defines how long your handheld waits before dropping the connection with your ISP or dial-in server when you switch out of a TCP/IP application. To set the Idle timeout: 1. Tap the Idle timeout pick list and select one of the following options: PPPPoint-to-Point protocol SLIPSerial Line Internet Protocol CSLIPCompressed Serial Line Internet Protocol 1 minuteWaits one minute for you to open another application before it drops the connection. 2 minutesWaits two minutes. 3 minutesWaits three minutes. Select connection type
Page 174 Setting Preferences for Your Handheld 2. Tap OK. Defining primary and secondary DNS The Domain Naming System (DNS) is a mechanism in the Internet for translating the names of host computers into IP addresses. When you enter a DNS number (or IP address), you are identifying a specific server that handles the translation services. Each IP address has four sections, separated by periods. In the Details dialog box, you enter each section separately. Each section of an IP address is made up of a number from 0 to 255; numbers are the only allowable characters in this field. Ask your Internet Service Provider or System Administrator for the correct Primary or Secondary DNS IP numbers. Tip: Many systems do not require that you enter a DNS. If you are not sure, leave the DNS field blank. To enter a primary and secondary DNS: 1. Tap the Query DNS check box to deselect it. 2. Tap the space to the left of the first period in the Primary DNS field, and then enter the first section of the IP address. Note: Each section must be a number from 0 to 255. 3. Repeat step 2 for the second, third, and last sections of the Primary DNS field. 4. Repeat steps 2 and 3 for the Secondary DNS number. 5. Tap OK. IP address Everyone who logs on to the Internet needs to have a unique identifier (an IP address), whether permanent or temporary. Some networks dynamically assign a temporary IP address when clients log in. The IP Address field lets you identify whether your network provides automatic (dynamic) temporary IP addressing. NeverKeeps your PPP or SLIP connection until you turn off your handheld (or until it times out). This option works best with the PalmModem accessory.
Chapter 7 Page 175 Note: If your IP address is permanently assigned, you need to get that information from your System Administrator. If you are not sure, select Automatic. To identify dynamic IP addressing: nTap the IP Address check box to select it. To enter a permanent IP address: 1. Tap the IP Address check box to deselect it and display a permanent IP address field below the check box. 2. Tap the space to the left of the first period then enter the first section of the IP address. Note: Each section must be a number from 0 to 255. 3. Tap and enter the remaining sections of the IP address. 4. Tap OK. Login scripts A login script is a series of commands that automates logging into a network server, for example, your corporate network or your ISP. A login script is associated with a specific service template created in Network Preferences. A login script is something that you are likely to receive from your IS System Administrator if your company has a system in which you log into the corporate servers from your handheld using a modem or network connection. The script is generally prepared by the System Administrator and distributed to users who need it. It automates the events that must take place in order to establish a connection between your handheld and the corporate servers. Tap to select automatic IP address
Page 176 Setting Preferences for Your Handheld You can create login scripts in two ways: nIn a text editor on your desktop computer, in which you create a file with the extension PNC, which you then install on your handheld using the Install Tool (this method is not available to Macintosh users) nIn the Login Script dialog box on your handheld, accessed from the Details dialog box in Network Preferences Note: You can also use non-ASCII and literal characters in your login script. See Appendix C for more information. Creating a login script on your handheld You can create login scripts by selecting commands from the Command pick list in the Login Script dialog. Some commands, such as Send, require you to supply additional information. Those commands have a parameter field so that you can add the necessary data. To create a login script: 1. Tap Script. 2. Tap the End pick list. Tap here to see the list of available commands Tap here
Chapter 7 Page 177 3. Tap the command you want from the Command list. If the command requires additional information, a field appears to the right of it for you to enter the information. The following commands are available: Wait ForTells your handheld to wait for specific characters from the TCP/IP server before executing the next command. Wait For PromptDetects a challenge-response prompt coming from the server and then displays the dynamically generated challenge value. You then enter the challenge value into your token card, which in turn generates a response value for you to enter on your handheld. This command takes two arguments, separated by a vertical bar (|) on the input line. SendTransmits specific characters to the TCP/IP server to which you are connecting. Send CRTransmits a carriage return or LF character to the TCP/IP server to which you are connecting. Send User IDTransmits the User ID information entered in the User ID field of the Network Preferences screen. Send PasswordTransmits the password entered in the Password field of the Network Preferences screen. If you did not enter a password, this command prompts you to enter one. The Password command is usually followed by a Send CR command. DelayTells your handheld to wait a specific number of seconds before executing the next command in the login script. Get IPReads an IP address and uses it as the IP address for your handheld. This command is used with SLIP connections. PromptOpens a dialog box and prompts you to enter text of some kind (for example, a password or a security code). EndIdentifies the last line in the login script.
Page 178 Setting Preferences for Your Handheld 4. Repeat steps 2 and 3 until the login script is complete. 5. Tap OK. Plug-in applications You can create plug-in applications containing script commands that extend the functionality of the built-in script commands. A plug-in application is a standard PRC application that you install on your handheld just like any other application. After you install the plug-in application, you can use the new script commands in a login script. Plug-in applications have the following characteristics: nWritten in C language nCompiled into a device executable nCalled properly from a login script nAble to return control to a login script after it terminates nCreated using a development environment that supports Palm OS software, such as Metrowerks CodeWarrior for Palm Platform. For additional information on creating plug-in applications, send e-mail to Palm Developer Support at [email protected]. Deleting a service template There is only one way to delete a service template: use the Delete command from the Service menu. To delete a service template: 1. Tap the Service pick list. 2. Tap the service template you want to delete. 3. Tap the Menu icon . 4. Tap Service, and then tap Delete. 5. Tap OK. Network preferences menu commands The Network Preferences screen includes menu commands to make it fast and easy to create and edit service templates. TCP/IP application menus are shown here for your reference. See “Using menus” in Chapter 1 for more information about choosing menu commands.
Chapter 7 Page 179 Service menu Options menu TCP/IP troubleshooting If you are having a problem establishing a network connection using TCP/IP, try the suggestions listed. Displaying expanded Service Connection Progress messages It’s helpful to identify at what point in the login procedure the connection fails. An easy way to do this is to display the expanded Service Connection Progress messages. Expanded Service Connection Progress messages describe the current stage of the login procedure. Press the lower half of the scroll button at any point during login to display these messages. Viewing the Network Log If viewing the expanded Service Connection Progress messages does not give you enough information to find out why you cannot connect to your ISP or dial-in server, take a look at the Network Log. The Network Log lists all of the communication that occurs between your modem and your dial-in server during the login procedure. The information in the Network Log can help your ISP or your System Administrator pinpoint where the login procedure communication fails and why. To view the Network Log: 1. Tap Options, and then tap View Log. 2. Tap the up and down arrows of the scroll bar to see the entire Network Log. 3. Tap Done.
Page 180 Setting Preferences for Your Handheld Adding a DNS number If your ISP or dial-in server requires a DNS number and you did not enter that information in the Network Preferences screen, it will appear that you successfully logged into your network. When you try to use an application or look up information, however, the connection fails. If this occurs, try adding a DNS number. Ask your ISP or your System Administrator for the correct Primary and Secondary DNS IP numbers. Owner preferences The Owner Preferences screen enables you to record a name, company name, phone number, or any other information that you want to associate with your handheld. If you use the Security application to turn off and lock your handheld with a password, information that you put in the Owner Preferences displays the next time you turn on your handheld. See Chapter 1 for more information. To enter the Owner preferences: nEnter the text that you want to associate with your handheld in the Owner Preferences screen. If you enter more text than can fit on one screen, a scroll bar automatically appears on the right side of the screen. If you assign a password with the Security application, the information in the Owner Preferences screen cannot be changed. In this case, an Unlock button appears at the bottom of the screen.
Chapter 7 Page 181 To unlock the Owner Preferences screen: 1. Tap Unlock. 2. Enter the password that you defined in the Security application. 3. Tap OK. ShortCuts preferences The ShortCuts Preferences screen enables you to define abbreviations for entering text with Graffiti strokes. This section describes how to create, edit, and delete a ShortCut. See Chapter 2 for more information on the use of ShortCuts. Creating a ShortCut You can create a ShortCut for any words, letters, or numbers. All ShortCuts you create appear on the list in the ShortCut Preferences screen. All the ShortCuts are available in any of your handheld applications and are backed up on your computer when you perform a HotSync operation. To create a ShortCut: 1. Tap New. 2. On the ShortCut name line, enter the letters you want to use to activate the ShortCut. 3. Tap the ShortCut Text area and enter the text that you want to appear when you write the ShortCut characters. Tip: You may want to add a space (space character) after the last word in your ShortCut text. This way, a space automatically follows the ShortCut text. 4. Tap OK. Tap New
Page 182 Setting Preferences for Your Handheld Tip: To use a ShortCut, draw the ShortCut stroke followed by the ShortCut characters. When you draw the ShortCut stroke, the ShortCut symbol appears at the insertion point to show that you are in ShortCut mode. Editing a ShortCut After you create a ShortCut, you can modify it at any time. To edit a ShortCut: 1. Tap the ShortCut you want to edit. 2. Tap Edit. 3. Make the changes you want and tap OK. Deleting a ShortCut If you no longer need a ShortCut, you can delete it from the list of ShortCuts. To delete a ShortCut: 1. Tap the ShortCut you want to delete. 2. Tap Delete. 3. Tap Yes. ShortCut