OKI C130n User Manual

							11 - C130n User’s Guide
Printer Parts
The following drawings illustrate the parts of your printer referred to 
throughout this guide, so please take some time to become familiar with 
them.
Front View
1—Output tray
2—Control panel
3—Front cover
4—Dust cover
5—Tray 1 (Multipurpose tray)
6—Top cover
7—Fuser unit
8—Fuser separator levers
9—Fuser cover lever
10—Imaging cartridge
11—Toner cartridge
1
2
3
4
6
5
88
7
10
11
9
7
11
10
Downloaded From ManualsPrinter.com Manuals 
						

							12 - C130n User’s Guide
Rear View
1—Power switch
2—Power connection
3—USB port
4—10Base-T/100Base-TX 
(IEEE 802.3) Ethernet 
Interface port
3
4
2
1
Downloaded From ManualsPrinter.com Manuals 
						

							13 - C130n User’s Guide
Printer CD 
PostScript Drivers
NoteA specific PPD file has been prepared for applications (such as 
PageMaker and Corel Draw) which require that a PPD file be specified 
when printing.
 
When specifying a PPD file while printing on Windows Server 2008, 
Vista, XP, Server 2003 and 2000, use the specific PPD file provided 
on the Printer CD.
PCL Drivers
PPD Files
Operating SystemUse/Benefit
Windows Server 2008/Vista/XP/
Server
 2003/2000
These drivers give you access to all of 
the printer features. See also 
“Displaying Printer Driver Settings” on 
page 19.Windows Server 2008/Vista/XP/
Server 2003 for 64bit
Operating SystemUse/Benefit
Windows Server 2008/Vista/XP/
Server 2003/2000These drivers give you access to all of 
the printer features. See also 
“Displaying Printer Driver Settings” on 
page 19.Windows Server 2008/Vista/XP/
Server 2003 for 64bit
Operating SystemUse/Benefit
Macintosh OS X (10.2.8/10.3/10.4/
10.5)These files are required in order to 
use the printer driver for each 
operating system. 
Macintosh OS X Server (10.2/10.3/
10.4/10.5)
Red Hat Linux 9.0, SuSE Linux 8.2
Downloaded From ManualsPrinter.com Manuals 
						

							14 - C130n User’s Guide
Utilities
Documentation
UtilityUse/Benefit
Status Monitor (Windows only)The current status of the printer in 
addition to the status of consumables 
and error information can be viewed. 
 
For details, refer to See “Using the 
Status Monitor” on page 26..
DocumentationUse/Benefit
User’s Guide (this manual)This manual provides details on 
general daily operations, such as 
using the drivers and control panel 
and replacing consumables.
Downloaded From ManualsPrinter.com Manuals 
						

							15 - C130n User’s Guide
System Requirements
Personal computer
–Pentium 2: 400 MHz (Pentium 3: 500 MHz or higher is recommended)
–Power Mac G3 or later (G4 or later is recommended)
–Macintosh equipped with an Intel processor
Operating System
— Microsoft Windows 
!Windows Server 2008 Standard/Enterprise
!Windows Server 2008 Standard/Enterprise x64 Edition,
!Windows Vista Home Basic/Home Premium/Ultimate/Business/
Enterprise, 
!Windows Vista Home Basic /Home Premium /Ultimate/Busi-
ness /Enterprise x64 Edition, 
!Windows XP Home Edition/Professional (Service Pack 1 or 
later; Service Pack 2 or later is recommended), 
!Windows XP Professional x64 Edition,
!Windows Server 2003, 
!Windows Server 2003 x64 Edition,
!Windows 2000 (Service Pack 4 or later)
— Mac OS X (10.2 or later; We recommend installing the newest 
patch), Mac OS X Server (10.2 or later)
— Red Hat Linux 9.0, SuSE Linux 8.2
Free hard disk space
–Approximately 20 MB of free hard disk space for printer driver and Sta-
tus Monitor
–Approximately 128 MB of free hard disk space for image processing
RAM 
128 MB or more
CD/DVD-ROM drive
I/O interface
–10Base-T/100Base-TX (IEEE 802.3) Ethernet interface port
–USB Revision 2.0 and USB Revision 1.1 compliant port.
Downloaded From ManualsPrinter.com Manuals 
						

							16 - C130n User’s Guide
Using the 
Windows Printer 
Drivers
Downloaded From ManualsPrinter.com Manuals 
						

							17 - C130n User’s Guide
Selecting Driver Options/Defaults 
Before you start working with your printer, you need to verify/change the 
default driver settings. Also, if you have options installed, you should activate 
them in the driver.
1Choose the driver’s properties as follows:
–Windows Server 2008/Vista 
From the Start menu, click Control Panel > Hardware and Sound > 
Printers to open the Printers directory. Right-click the icon for this 
printer, and then click Properties.
–Windows XP/Server 2003 
From the Start menu, choose Printers and Faxes to display the 
Printers and Faxes directory. Right-click the icon for this printer and 
choose Properties.
–Windows 2000 
From the Start menu, choose Settings > Printers to display the 
Printers directory. Right-click the icon for this printer and choose 
Properties. 
2If you have installed options, proceed with the next step. Otherwise, skip 
to step 9.
3Select the Configure tab.
4Check that the installed options are correctly listed. If not, proceed with 
the next step. Otherwise, continue with step 8.
5Click Refresh to automatically configure installed options.
NoteThe Refresh is available only if bi-directional communication is 
available with the printer; otherwise it is grayed out.
6From the Device Options list, select an option, then select Enable or 
Disable from the Settings menu.
7Click Apply.
8Select the General tab.
9Click Printing Preferences.
The Printing Preference dialog box appears.
10Select the default settings for your printer, such as the default media 
format you use, on the appropriate tabs.
11Click Apply.
12Click OK twice.
Downloaded From ManualsPrinter.com Manuals 
						

							18 - C130n User’s Guide
Uninstalling the Printer Driver 
This section describes how to uninstall the printer driver if necessary.
1Close all applications.
2Choose the Uninstall Program as follows:
–Windows Server 2008/Vista/XP/Server 2003 
From the Start—All Programs menu, choose the item that contains 
the printer utilities, and then click Uninstall Printer Driver.
–Windows 2000 
From the Start—Programs menu, choose the item that contains the 
printer utilities, and then click Uninstall Printer Driver.
3When the Uninstall dialog box appears, select the name of the driver to be 
deleted, and then click the Uninstall button.
4Click Uninstall.
5Click OK, and restart your computer.
Downloaded From ManualsPrinter.com Manuals 
						

							19 - C130n User’s Guide
Displaying Printer Driver Settings 
Windows Server 2008/Vista
1From the Start menu, click Control Panel > Hardware and Sound > 
Printers to open the Printers directory.
2Right-click the icon for this printer, and then click Printing Preferences.
Windows XP/Server 2003
1From the Start menu, choose Printers and Faxes to display the Printers 
and Faxes directory.
2Right-click the icon for this printer and choose Printing Preferences.
Windows 2000
1From the Start menu, point to Settings > Printers to display the Printers 
directory.
2Right-click the icon for this printer and choose Printing Preferences.
Downloaded From ManualsPrinter.com Manuals 
						

							20 - C130n User’s Guide
Using the Postscript® and PCL® Printer 
Drivers
Favorite Setting Button
This button appears on each tab. It allows the current settings to be saved.
To save the current settings, specify the desired settings, and then click Add. 
Specify the settings described below, and then click OK.
Name: Type in the name of the settings to be saved.
Icon: Select an icon from the icon list to easily identify the settings. 
The selected icon appears in the drop-down list.
Sharing: Specify whether or not the settings to be saved can be used by 
other users logged onto the computer.
Comment: Add a simple comment.
Afterward, the saved settings can be selected from the drop-down list. To 
change a registered setting, click Edit.
In addition, predefined settings 2-up, Photo and Grayscale can be 
selected.
Select Defaults from the drop-down list to reset the functions in all tabs to 
their default values.
Printer View
Click the button to display an image of the printer in the figure area.
When this button is clicked, it changes to the Paper View button (when a tab 
other than the Quality tab is selected) or the Quality View button (when the 
Quality tab is selected).
NoteThis button does not appear on the Advanced tab.
Paper View
Click the button to display a sample of the page layout in the figure area.
When this button is clicked, it changes to the Printer View button.
NoteThis button does not appear on the Quality tab.
Quality View
Click the button to display a sample of the settings selected in the Quality tab.
Downloaded From ManualsPrinter.com Manuals