Oce ColorWave 600 User Manual
Here you can view all the pages of manual Oce ColorWave 600 User Manual. The Oce manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 211
Use FTP to send a print job Introduction The Océ ColorWave 600 supports printing through FTP. If you send your print job through FTP the default Océ Express WebTools settings are leading. Note: You must enable printing through FTP in the Océ Express WebTools. How to send a print job via FTP You can print the files through FTP in the following ways. • Via a command line prompt • Enter the address ftp:// /jobs in your workstation browser. • Via an FTP application • From a Web browser The Océ...
Page 212
Use LPR to send a print job Introduction The Océ ColorWave 600 supports printing through LPR. If you send your print job through LPR the default Océ Express WebTools settings are leading. Note: You must enable printing through LPR in the Océ Express WebTools. How to send a print job via LPR Type the following line command after the DOS prompt: lpr -S -P . Note: You can use any name for , for example jobs .Chapter 5 - Use the printing system212Use LPR to send a print job Downloaded From...
Page 213
Monitor print jobs The job states # Description State The active job that the system is currently printing. 'Active job' The waiting jobs are all not-active jobs, regardless of their state. 'Waiting job' The system is processing the job data. 'Processing job' A job that requires user intervention before it can be printed (load media, enter accounting info, password… etc.). 'Attention job' A job that is being transferred over the network. 'Receiving job' A job...
Page 214
'Counter history' Introduction Navigate to the 'Support' - 'Counter history' tab to get an overview of the consumables used per printed job. The table below gives an overview of the 'Counter history' functionality that you can access to sort, group, save or print the information you need. Attention: To access the 'Counter history' functionality you must log on as a Key operator or as a System administrator. 'Counter history' functionality # Description...
Page 215
Description Functionali- ty When you click 'View total info' in the upper right corner of the counter history list, the total detailed counter information for all jobs in the list is displayed. View totals. When you click on a group name in the counter history list, the total detailed counter information for all jobs in the group is displayed. When you click on a job name in the counter history list, the total detailed counter information for the selected job is displayed. When you click...
Page 216
Control print jobs Pause, resume or delete an active job Introduction This section describes how to pause, resume or delete an active job. How to 'Pause' or 'Resume' an active print job # Remarks Action To pause the printer: In the 'Queue' screen use the 'Lower left softkey' key on the printer operator panel to pause the printer. The following message is displayed. • 'Printer pause requested' • 'The printer stops after this page', if the printer was...
Page 217
How to delete an active print job # Result Then If you use the The system aborts and deletes the job immediately. Press the 'Red stop key' Printer operator panel •Open the 'Jobs' tab. • In the 'Jobs - Queue' sec- tion place a checkmark in front of the job you want to delete and click 'Delete'. Océ Express WebTools Chapter 5 - Use the printing system 217Pause, resume or delete an active job Downloaded From ManualsPrinter.com Manuals
Page 218
Clear the system When to do If you want to remove all the jobs from the system. How to clear the system # Illustration Action From the 'Home' screen on the printer operator panel select the 'System' tab. 1 Select the 'Maintenance' tab with the upper left softkey. 2 Use the 'Scroll wheel' to select 'Clear system' and confirm with the 'Confirmation key' (above the 'Scroll wheel'). 3 Chapter 5 - Use the printing system218Clear the system...
Page 219
Illustration Action Follow the steps in the wizard. 4 Select 'Yes' to clear the system. Note: This action cannot be undone.5 Select 'Finish'. The system is now cleared. 6 Select 'Back' to return to the 'System' screen.7 Chapter 5 - Use the printing system 219Clear the system Downloaded From ManualsPrinter.com Manuals
Page 220
Illustration Action Select 'Home' to return to the 'Home' screen. 8 9 Chapter 5 - Use the printing system220Clear the system Downloaded From ManualsPrinter.com Manuals