Oce ColorWave 600 User Manual

'Print Preview'
'Print Preview'
The system displays an interactive preview to represent:
• The
 
way the system will print the image
• The 
effects of the selected settings on the output.
Orientation 
of the image in the 'Print Preview'
The orientation of the image displayed in the 'Print Preview' depends on the 'Media size'
and cut method you select 
in the 'Media' settings: #
Then
When
The 
'Print Preview' displays the docu-
ment in
 
its reading...

Set the Basic and Advanced settings
'Basic' settings
Introduction
In this tab, you can view the general main settings of a document.
Illustration 'Media'
You can manually 
select in the lists the 'Media type' and the 'Media size' to be used.
The 
lists display all the media (type and size) enabled on the printer.
A roll
 status icon indicates if a specific media type on the printer is available, empty or
loaded.
When

 you select 
a 'Roll' in the 'Media...

Note:
If you select a media not loaded on the printer (or if the roll is empty) and submit the
job, 
the job status will turn into 'Waiting' ('Media not currently loaded on the printer.')
and the job will be held until you 
load the selected media.
Note:
'Warning' in case of folding: if the media you select does not support folding, an error
message is
 displayed. You must select a foldable media (type and size) or disable the
folding option

 to be able to print the job....

Note:
Some media types cannot be delivered to the 'Top Delivery Tray (TDT)' or to the
folder.
A media
 from a roll wider than 36 
inches cannot be delivered to the folder. 'General'
Enter the number of copies of the document to print, between 1 and 999 ('Copy count').
Chapter 6
 - The Océ Publisher Copy option264'Basic' settings
Downloaded From ManualsPrinter.com Manuals 

'Advanced' / 'Media' settings
Introduction
For each scanned original in the job, the system automatically selects the most appropriate
media to be used for printing, according to:
•Automatically applies
 the default print settings defined in the template
• The 
size of the image in the document
• The 
folder value
You can
 manually 
pick out the media to be used if either:
• When the system does not find 
an appropriate media
• You want
 
to use another media than the one selected by the...

Illustration
'Media'
You can manually select in the lists the 'Media type' and the 'Media size' to be used.
The 
lists display all the media (type and size) enabled on the printer.
A roll
 status icon indicates if a specific media type on the printer is available, empty or
loaded.
When

 you select 
a 'Roll' in the 'Media size', the media is cut to the size of the image.
To cut
 
to a standard sheet size, select a 'Sheet size'.
Note:
If you select a media...

Note:
'Warning' in case of folding: if the media you select does not support folding, an error
message is
 displayed. You must select a foldable media (type and size) or disable the
folding option

 to be able to print the job. 'Media information'
According to the media selected and the printer capabilities, the 'Media information' in-
dicates the 'Media source' to 
be used and the 'Media orientation' to be used.
Chapter 6
 - The Océ Publisher Copy option...

'Advanced' / 'Layout' settings
Introduction
You can define the layout of the image on the media.
Illustration 'Scale factor'
Define the 'Scale factor' if the image must be scaled on the printout. Select: #
to 
keep the original image size.
'1:1 Scale'
to 
define a custom scale value (the scale range depends on
the printer)
'Custom scale'
for an 'Automatic scale down when image is larger than
media'
'Reduce 
to fit'
for an 'Automatic...

•
'Automatic': the orientation of the image is selected by the system in order to optimize
the position of the image, according to the settings defined ('Folding', 'Legend posi-
tion'...).
• 'Manual', 
to manually define the orientation of the image on the media, according to
the media previously set in the 'Basic' or 'Media' tab. #
You can decide to:
When the

 'Media size'
is:
'Print 
image short edge first': 'The short edge of the...

You can change the alignment of the image on the media.
The reference is the image displayed in the 'Print Preview'. You can immediately check
the effect
 of the adjustment in the preview.
Activate the

 option and type in a value:
• In the

 'Horizontal' field, a positive value shifts the image to the right of media.
A negative

 is a shift to the left
• In the

 'Vertical' field, a positive value shifts the image to the bottom of media.
A negative

 value shifts it to the top....