Oce ColorWave 600 User Manual

Configure the media sizes
Introduction
You must indicate in the Océ Express WebTools the following settings.
• The 
core size of the media rolls
• The 
media sizes How to define the core size of the media
Attention:
Access the Océ Express WebTools. This setting is editable for the Key operator and the
Power user. 1.
Navigate 
to 'Configuration' - 'Printer setup'.
2. Click 
'Edit' in the 'Media' bar or click the value of the 'Two-inch core used' setting if
you 
also...

#
Media sizes
Media series
42x60 inch, E, D, C, B.
'ANSI small'
42x60
 inch, E+, A0, B1, A1, B2, A2, A3
'DIN'
42x60
 inch, F+, E+, E, D+, D, C+, C, B+, B.
'ANSI
 mixed'
42x60
 inch, 500x700 mm, 700x1000 mm, 800x1189 mm, A0,
A1, A2, A3, B0, E+.
'DIN

 Carto'
...
'Custom'
Note:
You cannot disable media sizes that are currently loaded on the printer.
Note:
When you load a media roll the printer automatically detects the roll width. If the detected
roll width is not a...

What is a media profile?
Definition A media profile is also called an Océ Media Profile (OMP file). The media profile contains
a number of preset values that 
give the best print result per media type for your system.
By
 default the system already has a number of media profiles available after installation,
but due to changes 
in the production methods for media, the profiles can also change
over 
time. When a new version is available you can retrieve the new profile from the
corporate
 web site...

Manage the media profiles
Introduction
The Océ Express WebTools allow you to manage the media profiles on the printer.
Before 
you begin This 
setting is editable for the Key operator or Power user.
How 
to manage the media profiles 1. Click the 'Support' - 'Media' tab in the Océ Express WebTools to get an overview of all
the media profiles that are 
available on your Océ ColorWave 600 printing system.
Note:
Please refer to ‘Preferred Océ media types and sizes’
 on page 408 and ‘Support...

Note:
The media profiles for non-Océ media types are generic media profiles that give the best
possible result for a variety of the specified non-Océ media types. Because the media
profiles for

 Océ media types are 
fine-tuned for each specific media type, the quality of
the printed
 output will improve if you 
use Océ media types. 2.
Click the media type, for example 'Océ Red Label 75gr', to check the media profile infor-
mation.
3. Click the check box of a media profile and click the...

Download a media profile from the Océ web site
When to do When a new media profile is available or an existing media profile needs to be updated
you 
can retrieve the required media profile from the corporate web site.
How 
to download a media profile from the Océ web site 1. Visit http://mediaguide.oce.com.
2. Click 
'Continue' in the Wide format printer section.
3. Select Océ
 ColorWave 600 
in the Printer name section and click 'Continue'.
4. Select
 one or more media types and click...

Upload a media profile
When to do When you have downloaded the new or updated media profile from the corporate web
site 

you need to upload this media profile to the Océ ColorWave 600 embedded controller.
Before you begin This 
setting is editable for the System administrator or Power user.
How 
to install a new media profile 1. Click 
'Support' - 'Media'.
2. Click 
the 'Install' button in the toolbar above the media profiles list.
3. Click 
Browse to navigate to the correct file...

Note:
If an older version of the file was active on the controller, this file will be overwritten by
the new file.•
Download a media profile from the web site
, on page  286
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system288Upload a
 media profile
Downloaded From ManualsPrinter.com Manuals 

Replace a media roll
The 'Media drawer'
Illustration Component - function table
Attention:
Only use intact media rolls. Dented media rolls can damage the 'Imaging devices'.
#
Description / Function
Component
Nr
Media roll 3 
or 5 in other media drawers
'Roll' 1
1
Media roll 4 
or 6 in other media drawers
'Roll' 2
2
Carries 
the media roll
'Roll holder' 3
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 289The 'Media drawer'
Downloaded From...

Description / Function
Component
Nr
Groove integrated behind the front cover of
the media
 drawer.
To 

load new media on the printer, the opera-
tor 
must proceed as follows
• place
 
the new media roll temporarily on
the roll
 loading station
• insert the

 roll holder into the new media
roll
• place 
the roll holder with the new media
roll in
 
the correct roll position
'Roll 
loading station'
4
Helps the operator to load a media roll.
'Roll 
loader' (optional) 5
Chapter 7
 - Manage...