Oce ColorWave 600 User Manual

Make a new media profile available on the printer operator
panel
How to make a new media profile available on the printer operator panel
1.Download 

the correct media profile from the Océ website. (see  ‘Download a media profile
from the Océ web 
site’  on page 286)
2. Upload
 the correct media profile to the Océ ColorWave 600 
embedded controller. (see
‘Upload a
 media profile’  
on page 287)
3. Click
 the check box of a media profile and click the 'Enable' button in the toolbar above
the media...

Load or replace a toner cartridge
Illustration #
Description / Function
Component
Nr
Toner cassette for cyan 'Océ TonerPearls ®
'
'Toner

 cartridge' (cyan)
9
Toner cassette for yellow 'Océ TonerPearls ®
'
'Toner cartridge' (yel-
low)
10
Toner cassette
 for black 'Océ 
TonerPearls®
'
'Toner cartridge'
(black)
11 / B
Toner  cassette for magenta 'Océ TonerPearls®
'
'Toner cartridge' (ma-
genta) 12
Chapter 5
 - Use the printing system162Load or...

How to load or replace a toner cartridge
#
Illustration
Action The printer operator panel dis-
plays 
a request when you must
load or replace a toner cartridge.
1 Unpack the toner cartridge.
Note:
Please do not throw
away
 the empty packag-
ing of the new toner
cartridge. This

 
packag-
ing is used as 
mainte-
nance tray. 2
Remove the empty toner car-
tridge.3
Chapter 5
 - Use the printing system 163Load or replace a
 toner cartridge
Downloaded From ManualsPrinter.com Manuals 

Illustration
Action Place the new toner cartridge.
Note:
You must place the ton-
er cartridge in the cor-
rect color

 position. The
toner cartridges

 have
fixed

 positions. 4
When the new toner cartridge is
placed 
correctly, the following
message is
 displayed on the
printer operator

 panel.
'Replace 
the maintenance tray.
Use 
the packaging of the new
toner cartridge.'
Follow 
the instructions in the
wizard.
 (see ‘Replace 
the mainte-
nance 
tray’  on page 67) 5
Chapter 5
 - Use the...

Replace the maintenance tray
Illustration
#
Description / Function
Component
Nr
'Maintenance tray
drawer'
7
How 
to replace the maintenance tray #
Illustration
Action The 
printer operator panel dis-
plays 
a request when you must
replace the maintenance tray. 1
Chapter 5
 - Use the printing system 165Replace the maintenance tray
Downloaded From ManualsPrinter.com Manuals
7   

Illustration
Action Follow the instructions in the
wizard.
Note:
Please note that the
'Maintenance
 tray
drawer' is

 located at the
rear

 
side of the Océ
ColorWave 
600 printer.
Push 
the 'Maintenance
tray drawer'  to open 
it. 2
Pull 
the 'Maintenance tray
drawer' open.
3 Lift 
the old maintenance tray
out. 4
Chapter 5
 - Use the printing system166Replace the maintenance tray
Downloaded From ManualsPrinter.com Manuals 

Illustration
Action Place the empty maintenance
tray.
5 Push 
the 'Maintenance tray
drawer' shut.
6 When the new maintenance tray
is placed correctly, press 'Finish'
on the 'Printer operator panel'
to 
continue.7
Chapter 5
 - Use the printing system 167Replace the maintenance tray
Downloaded From ManualsPrinter.com Manuals 

Monitor the printer
The system monitor and the system states
Introduction
You can activate the system monitor to get an overview of the current status of the
printing system.
How 

to activate the system monitor #
Then
If you use the
From the 'Home' screen select 'System' with the 'Lower left softkey'.
Printer opera-
tor 
panel #
Then
If you use the
Click on the 'System' tab in the lower left corner of the screen. The
system monitor pops-up. Océ 
Express
WebTools Chapter...

Then
If you use the How to view the system states
The system states provide you with additional information about the printer. The system
state messages are displayed on the printer operator panel and in the Océ Express
WebTools.
1. On
 
the printer operator panel.
The 
system state (for example: 'Ready to print') is displayed on the 'Home' screen of the
printer operator panel. 2. In the Océ Express WebTools.
Chapter 5
 - Use the printing system 169The system monitor and the system...

The system state (for example: 'Printing:') is displayed in the upper right corner of the
system monitor
 section of the Océ Express WebTools.
Overview 

of the system states #
Description
Icon
State
The user is requested to go to the printer and fol-
low 
the instructions displayed on the user panel.'User intervention re-
quired'
Status 

message when printer does not print because
the system memory is full. 'System memory is full'
Status message when printer does not print...