Oce ColorWave 600 User Manual

Note:
You do not need a password for the normal use of the system.Chapter 4
 - Configure the printing system 111User roles and authorizations
Downloaded From ManualsPrinter.com Manuals 

Log in as an authorized user
Purpose In order to have write access for certain groups of settings, you must log in as an authorized
user. There are 3 user roles, System administrator, Key operator and Power user who have
authorization to

 edit specific groups of settings. You do not need 
to log in before you
start 
a session. The system will only display a message when you need to log in to perform
an action.
Before 

you begin Navigate 
through the tabs and select the value of a setting you wish to...

Log out after your session
Purpose When you have finished the modification of a setting, it is advised to log out again.
How

 to log out after you have finished your session 1. Click 
the log out hyperlink in the top right-hand corner
 of the screen.
or
2. Close the screen of your internet 
browser.
•
Log in as an authorized user
, on page  112
Chapter 4
 - Configure the printing system 113Log out after
 your session
Downloaded From ManualsPrinter.com Manuals 

Change the password for authorized users
When to do
For security reasons it is advised to periodically change the password for the 3 access
modes (Key operator, System administrator, Power user) to the Océ Express WebTools.
Attention:
Handle and store all passwords securely and with care. The machine has to be reinstalled
in 
case of forgotten passwords. How to change the password for authorized users
1.Click 
'Configuration' - 'Connectivity' - 'Passwords'.
2. Expand the...

E-shredding
Enable or disable the e-shredding function
Introduction
The e-shredding function allows you to securely erase jobs from the system. This prevents
unauthorized people from recovering the deleted jobs. When the e-shredding function
is enabled,
 you can 
select an e-shredding algorithm. You can enable the e-shredding
function in
 
the Océ Express WebTools. By factory default, the e-shredding function is
disabled.
How 
to enable the e-shredding function 1. Go to 
'Configuration' -...

Select the e-shredding algorithm
Introduction
The e-shredding function allows you to securely erase jobs from the system. This prevents
unauthorized people from accessing the deleted jobs.
You can
 select 
one of the following algorithms.
• 'Gutmann'.
All jobs on the system are erased 
in 35 overwrite passes.
• 'DoD 5220.22-M'.
All jobs on the system are erased 
in 3 overwrite passes.
• 'Custom' allows you to 
define the number of passes manually.
The 
factory default is 'DoD...

Specify the number of overwrite passes
Introduction
The e-shredding function allows you to erase jobs from the system. This prevents unau-
thorized people from accessing the jobs. You can manually enter the required number of
overwrite passes. Therefore, the setting 'E-shredding algorithm' must be set to 'Custom'.
The more passes you define, the more reliable the erasing of jobs is. However, more
passes 
take more time. You can enter any number from 1 to 35. The factory default is 3....

Configure the printer
The 'System properties' tab in the Océ Express
WebTools
What you need to know about default settings
Definition
Before you send print jobs to the Océ ColorWave 600, remember the following. The values defined in the Océ Express WebTools are default values for the general system
behavior. You can define a number of job settings in the Océ printer drivers or the Océ
job submission

 tools. The settings defined in the printer drivers or the job submission
tools always

 overrule...

Configure the regional settings of the Océ ColorWave 600
Purpose
The regional settings are configured during the installation of your Océ ColorWave 600.
If you want to change the initial configuration, you can do so in the 'Regional settings'.
Define
 the regional settings for the printer in the following order.
• 'First 
language' and 'Second language' of the printer operator panel
• 'Measurement unit'
• 'Time 
zone'
If you change the 'Time zone' 
you must...

Define the display languages of the printer
Introduction
The Océ Express WebTools allows you to define the 'First language' (the default display
language) and the 'Second language' (the alternative display language) for the printer
operator panel.
The 

'First language' and the 'Second language' you defined in the Océ Express WebTools
are 
also the display languages that are available on the printer operator panel. You can
toggle between
 these two languages using the...