Oce ColorWave 600 User Manual

Description / Function
Component
Nr
Groove integrated behind the front cover of
the media
 drawer.
To 

load new media on the printer, the opera-
tor 
must proceed as follows
• place
 
the new media roll temporarily on
the roll
 loading station
• insert the

 roll holder into the new media
roll
• place 
the roll holder with the new media
roll in
 
the correct roll position
'Roll 
loading station'
4
Helps the operator to load a media roll.
'Roll 
loader' (optional) 5
Chapter 3
 - Prepare...

Unpack a media roll
How to unpack a media roll
Attention:
Handle the media roll with care. A dented media roll can damage the imaging devices.
Attention:
Please note down the media code (for example LFM090) indicated on the sticker on the
media box. You need this code to select 
the correct media type on the printer operator
panel.
Attention:
Always write the correct media name and media code inside the core, after you unpack
the
 media roll. In that case, 
if you replace a media roll before it is empty...

Illustration
Action Remove the plug from the media
roll.
2 Carefully remove the media roll
from the box.
3
Remove the other plug and
plastic

 around the media roll. 4
Chapter 3
 - Prepare the printing system for use and get started 73Unpack a
 media roll
Downloaded From ManualsPrinter.com Manuals 

Load a media roll
How to load a media roll
Attention:
Do not use dented media rolls to prevent damage to the imaging devices.
Attention:
Do not open the media drawer during the print process. When the last print is delivered,
wait 
10 seconds before you open the media drawer.
Attention:
Do not open more than one media drawer at the same time to prevent overbalance of
the printer.
Attention:
It is very important to select the media type with the correct media code (for example
LFM090).
 
You can find the...

#
Illustration
Action Open the correct media drawer
to load the new media roll.
1 Place 
the new media roll on the
roll loading
 station.
2 Pull the handle of the roll holder
locking mechanism towards you.3
Chapter 3
 - Prepare the printing system for use and get started 75Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 

Illustration
Action Slide the roll holder in the core
of the
 new media roll.
4 Align the roll with the correct
size 
indicator on the roll holder
(At 
the left and right hand side).
Release the handle of the locking
mechanism.
5 Remove the tapes from 
the new
media roll.
 Use both hands (as
indicated) 

to place the media roll
in 
the media drawer. 6
Chapter 3
 - Prepare the printing system for use and get started76Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 

Illustration
Action Keep the media tight on the roll
and in-line with the side edge.
7 Use both hands to turn the me-
dia 
roll backwards until the me-
dia flap has passed the metal pa-
per guide (1). 8
Chapter 3
 - Prepare the printing system for use and get started 77Load a
 media roll
Downloaded From ManualsPrinter.com Manuals
1  

Illustration
Action Use both hands to slide the me-
dia under the metal paper guide.
A "beep" confirms the correct
paper transport
 (2).
9 Close the media drawer.
Note:
Do not open the 'Media
drawer' during loading.10
Chapter 3
 - Prepare the printing system for use and get started78Load a
 media roll
Downloaded From ManualsPrinter.com Manuals
2  

Illustration
Action The following screen appears on
the printer operator panel.Note:
When you load a media
roll the printer automat-
ically detects the roll
width. 
If the detected
roll width
 
is not a stan-
dard width,
 the printer
selects the

 next smaller
roll

 width that 
is sup-
ported by
 the printer. 11
 /
B Chapter 3
 - Prepare the printing system for use and get started 79Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 

Complete the printer configuration in the Océ Express
WebTools
1.Open a web browser on a customer workstation connected to the network.
2. Enter the
 following address: 'http://' (for example
http://134.188.26.173)
 
to access the Océ Express WebTools.
Note:
If the Océ Express WebTools do not appear, contact the network administrator to check
the network parameters. Check if the Océ ColorWave 600 
network settings have been
registered in
 the network infrastructure. 3.
Select...