Oce ColorWave 600 User Manual

Illustration
The main components of the Océ ColorWave 600 printing system
#
Description / Function
Component
Creates the printed output.
The 'Océ ColorWave ®
 600
Printer'
The 'Océ Express WebTools' provide multiple users a
remote view on the system and control on the system's
workflow, 
without any need to install software.
The 
'System administrator' or the 'Key operator' can
also 
use the 'Océ Express WebTools' to install the sys-
tem and fine tune the...

The Océ ColorWave 600 printing system consumables
#
Description
Consumable part
Consumable
Roll 
that carries the media. A roll can
have a
 2" core or a 3" core.
'Roll'
'Media'
The 
core of the media roll is the card-
board 
inner part of the roll.
'Core'
Toner cassette
 for cyan, yellow, black or
magenta

 
toner.
'Toner cartridge'
'Toner'
Solid 
and clean spherical-shaped toner
inside 
the cartridge.
'Océ 
TonerPearls
® '
Chapter 2
 - Get to know...

The Océ ColorWave 600 printer
Printer working area
 [Footprint]
The 
Océ ColorWave 600 requires a floor space / working area of at least 3100 mm x
2270
 mm (122 inch x 90 inch). Chapter 2
 - Get to know the printing system 23Printer working area
 [Footprint]
Downloaded From ManualsPrinter.com Manuals                

The printer hardware components (front)
Illustration
Component - function table
#
Description / Function
Component
Nr
'Lower left cover'
1
Media drawer that contains the media roll 5
and/or 6.
(see 

‘The 'Media 
drawer'’  on page 28)
'Media
 drawer'
2
Media drawer
 that contains the media roll 3
and/or 4.
(see 

‘The 'Media 
drawer'’  on page 28)
'Media
 drawer'
3
Media drawer
 that contains the media roll 1
and/or 2.
(see 

‘The 'Media 
drawer'’  on page...

Description / Function
Component
Nr
'Top left cover'
8
Toner cassette for cyan 'Océ TonerPearls®
'
'Toner

 cartridge' (cyan)
9
Toner cassette for yellow 'Océ TonerPearls ®
'
'Toner cartridge' (yellow)
10
Toner cassette
 for black 'Océ 
TonerPearls®
'
'Toner cartridge' (black)
11 /
B
Toner cassette for magenta 'Océ TonerPearls ®
'
'Toner cartridge' (magenta)
12
Delivery tray for the printed output.
Note:
It is possible to install an...

The printer hardware components (back)
Illustration
Component - function table
#
Description / Function
Component
Nr
'Wheel'
1
'Left cover of the media
drawer'
2
'Back cover
 of the media
drawer'
3
The 
connection panel of
• the 'Océ
 PowerM controller'
(standard embedded
  controller)
or
• the 'Océ

 PowerM Plus controller '
(high-end embedded

 controller)
'Connection 
panel'
4
'Back left cover' 5
Chapter 2
 - Get to know the printing system26The...

Description / Function
Component
Nr
Covers the 'Océ PowerM controller' / 'Océ
PowerM Plus
 controller '
'Ventilation cover'
6
'Maintenance tray drawer'
7
'Top back

 left cover'
8
Used 
for error recovery.
Note:
It is possible to install an optional
'Receiving rack
 (basket)' or a folder.
Note:
If you select 'External output (back)',
the printed output is lead through the
slot 
below the 'Top back cover'. 'Top back cover'
9
'Top...

The 'Media drawer'
Illustration
Component - function tableAttention:
Only use intact media rolls. Dented media rolls can damage the 'Imaging devices'.
#
Description / Function
Component
Nr
Media roll 3 
or 5 in other media drawers
'Roll' 1
1
Media roll 4 
or 6 in other media drawers
'Roll' 2
2
Carries 
the media roll
'Roll holder' 3
Chapter 2
 - Get to know the printing system28The 'Media drawer'
Downloaded From ManualsPrinter.com Manuals 

Description / Function
Component
Nr
Groove integrated behind the front cover of
the media
 drawer.
To 

load new media on the printer, the opera-
tor 
must proceed as follows
• place
 
the new media roll temporarily on
the roll
 loading station
• insert the

 roll holder into the new media
roll
• place 
the roll holder with the new media
roll in
 
the correct roll position
'Roll 
loading station'
4
Helps the operator to load a media roll.
'Roll 
loader' (optional) 5
Chapter 2
 - Get to...

The 'Imaging section'
Illustration
[15] When you open the 'Top cover' you get access to the 'Imaging section'.
Component - function table #
Description / Function
Component
Nr
The print surface is designed to keep the me-
dia that is printed on flat.
'Print surface'
1
The 
8 Imaging devices jet the toner on the
media.
'Imaging devices'
2
Carriage that contains the 8 
imaging devices
'Imaging carriage' 3
Chapter 2
 - Get to know the printing system30The...