Nortel Modular Ics 6.1 System Coordinator Guide

Getting started with Norstar / 21
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Business Series Terminal programming overlay
Heading
BackShow
Next
Heading
BackShow
Next
Business
Se ries
Ter mi nal s
Programmi ng
Rec or d
Overlay placed over keys 
with indicators T7316E programming set
T7316 programming set 

22 / Getting started with Norstar
Modular ICS 6.1 System Coordinator Guide P0603535  02
Placing the programming overlay on Norstar sets 
Heading
Back NextShowNorstar Programming Overlay
Heading
Back NextShowNorstar Programming Overlay
HeadingHeading
BackNextNext
ShowNorstar Programming OverlayHeading
Back NextShow
Norstar Programming Overlay
PO698666  Issue 02
Printed in Canada
Displays the first setting 
within a menu level
Moves display one item forward 
on the current menu level Displays the heading...

Getting started with Norstar / 23
P0603535  02 Modular ICS 6.1 System Coordinator Guide
A map for using programming
The tables on the following three pages show the headings that 
display when you move through the display menu after pressing 
²¥¥‚¯öìéí and entering the password (the 
default password is  or ÛÜßÝß).
The default Basic password ( or 
ÛÛàÝÛ) can be used with a limited number of feature 
codes, including ¥¥æé÷ä and the codes for turning 
call services on and off. For more information, see...

24 / Getting started with Norstar
Modular ICS 6.1 System Coordinator Guide P0603535  02
System Coordinator user interface
Te r m i na l s  
& SetsShow set
Enter digits 
or press 
LIST.Capabilities Fwd no answer Fwd to
Fwd delay
Fwd on busy Fwd to
DND on busy
Handsfree
HF answer back
Pickup grp
Page zone
Paging
D-Dial
Priority call
Hotline Intrn #
Extrnl# .... Use prime 
line
Aux. ringer
Allow redirect
Redirect ring
ATA settings ATA ans timer
Msg Indicate
Name
User 
preferencesModel
Button 
progrming# of...

Getting started with Norstar / 25
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Note: Some headings will only show if required by the 
selected options for the previous heading.
Lines Show lines 
___
Enter digits or 
press LISTName
Services Ringing 
serviceSche d: Night
Evening
Lunch
Sche d 4
Sche d 5
Sche d 6Off, Manual, 
Auto
Restrn 
servicesSche d: Night
Evening
Lunch
Sche d 4
Sche d 5
Sche d 6Off, Manual, 
Auto
Routing 
serviceSche d: Night
Evening
Lunch
Sche d 4
Sche d 5
Sche d 6Off, Manual,...

26 / Getting started with Norstar
Modular ICS 6.1 System Coordinator Guide P0603535  02
System 
PrgrmingHunt Group Show  Group Member DNs
Line assignment Show line ___
Unassigned/
Assigned
Mode Broadcast
Sequential
Rotary
Hunt Delay
If Busy BusyTone/Queue
Q Timeout
Overflow
Name
Aux. Ringer
Distnct ring
Companion
(MICS-XC 
only)Registration Registration
Portable DNs Show DN
Available/
unavailable
Radio data Re-evaluation Status
Radios Cell Assignment/
Show radio
Assigned/
unassigned
Cells Show Cell
Cell...

Getting started with Norstar / 27
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Starting and ending a session
As system coordinator the first steps in making any change to the 
Norstar system are always the same. 
Ending a session
The system makes any changes you indicated in programming as 
soon as you move away from a setting, either by using the 
navigation buttons or by pressing ¨.
You can see if the changes you made to telephone programming 
have taken effect by pressing the UPDATE
 display...

28 / Getting started with Norstar
Modular ICS 6.1 System Coordinator Guide P0603535  02
Record any changes you make in the Modular ICS 6.1 
Programming Record. If there is a problem with the system, the 
installer needs to see a history of the changes you have made. 
Remember to inform people in your office of any changes you 
have made that affect them. For example, you may change 
system speed dial codes or change the number of rings before an 
unanswered telephone is forwarded. 

Frequently used programming operations / 29
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Frequently used 
programming operations
The following sections highlight the most frequently used 
programming operations. To consult these or other programming 
operations, see either the Table of Contents or the Index .
Changing the display time & date  
Entering letters and numbers using the dialpad
Press ².
Press ¥¥¡ÝßÜ 
(which is the same as 
¥¥æé÷ä).
PressÛÛàÝÛ ( ) or 
ÛÜßÝß ()
The passwords can be...

30 / Frequently used programming operations
Modular ICS 6.1 System Coordinator Guide P0603535  02
In this example, you are changing the time to 1:30 p.m.
Press CHANGE.
Press the dialpad buttons to enter the hour. Use 
two digits for all hours. The clock on the display 
shows either one or two digits.
The display prompts you to choose a.m. or p.m. 
Press 
CHANGE and OK to select p.m.
Press NEXT.
Press CHANGE.
Press the dialpad buttons to enter the minutes.
If you are only changing the time and not the...