Nortel Modular Ics 6.1 System Coordinator Guide

Using System features / 221
P0603535  02 Modular ICS 6.1 System Coordinator Guide
To turn a Service on:
1. Enter the appropriate feature code from a control 
telephone.
2. For Restriction and Routing service you have to enter the 
System Coordinator or Basic password.
3. Press N E X T
 to move through the schedules until the display 
shows the version of the service you want to be turned on.
4. Press OK
 to select the setting, or press QUIT to exit the 
feature without making any changes.
To turn a...

222 / Using System features
Modular ICS 6.1 System Coordinator Guide P0603535  02
3. Press EXIT to exit the feature.
Viewing the active Services on a one-line display
1. Press ²¡àâ. The display shows the first active 
Service.
2. Press £ to move through the active schedule.
3. Press ¨ to exit.
Displays
You are viewing the active Services. Press 
£ or NEXT to see  the other active 
Services. Press 
¨ or EXIT to quit.
The name of the current Restriction 
service schedule displays. Press
 £ or 
NEXT
 to see...

Using System features / 223
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Services that have been turned on automatically are indicated 
by an asterisk (*) before the name on the display. You can 
neither manually activate nor cancel automatically-scheduled 
services, although you can override them by manually turning 
on another schedule.
The control telephone can override Services that are turned on 
and off according to a schedule at any time by entering a 
Services feature code, and then...

224 / Using System features
Modular ICS 6.1 System Coordinator Guide P0603535  02
Using passwords
Your passwords prevent unauthorized or unintentional 
changes to your Norstar system. To keep your telephone 
service secure, distribute the password only to selected 
personnel or make use of the basic password described below. 
Record your password in a secure place and change it 
periodically.
If you forget the administration or basic passwords, you 
cannot do any programming. Call your customer service...

Using System features / 225
P0603535  02 Modular ICS 6.1 System Coordinator Guide
You can enter the Basic password after the following feature 
codes:
²¥¥ èêäå to access User Preferences 
² ¥¥æé÷ä to change the system time and 
date
Because the Basic password can be used to change the time, 
you should give it out with care and change it when necessary, 
for example, when an employee leaves the company. If 
restrictions, routing or other services operate on a schedule, 
changing the time can allow...

226 / Using System features
Modular ICS 6.1 System Coordinator Guide P0603535  02
7. Press ‘ until you see the name of the password 
you want to change.
8. Use ≠, CHANGE
 and the dialpad to enter the new 
password. Press OK
 to accept the new password.
You cannot erase or eliminate the ability to program 
passwords. 
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can 
clear it in programming. The individual can then enter a new 
password from his or her...

Using System features / 227
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Hospitality passwords
There are two passwords within the Hospitality feature. One 
provides secure access to the administration set for 
programming the service, and one provides secure access to a 
room condition setting from each room set for housekeeping 
staff.
Desk pswd
Change this administration password frequently, to maintain 
security.
At Hospitality:
1. Press ≠. Desk pswd: displays. (default is 4667)
2. Press...

228 / Using System features
Modular ICS 6.1 System Coordinator Guide P0603535  02
Silent Monitor password
Users must enter a password when they use ²¥ÞÞâ 
to monitor Hunt group calls.
It is advisable to change this password frequently.
At SM Passwd (default: 745368 (SILENT)):
1. Press CHANGE
. 
New pswd: displays
2. Use the keypad to enter a new password.
3. Press OK
.
Using special telephones
Direct-dial 
You can reach the direct-dial telephone by dialing a single 
digit. The direct-dial telephone is...

Using System features / 229
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Changing the direct-dial telephone assignments
Your installer or customer service representative sets up the 
direct-dial telephone.
You can change which direct-dial telephone a telephone is 
assigned to, or assign it no direct-dial telephone. 
You need the programming template found at the front of this 
guide. See Getting started with Norstar on page 13 for more 
information.
1. Press ²¥¥ÛßßÜÝÝ.
2. Press ÛÜßÝß (the...

230 / Using System features
Modular ICS 6.1 System Coordinator Guide P0603535  02
Hotline
A hotline telephone calls a preset internal or external 
telephone number when you pick up the receiver (or press the 
handsfree button).
Bypassing a Hotline
Press a line button, or use the Pre-Dial or the Automatic Dial 
feature before you pick up the receiver or press the  handsfree 
button on a hotline telephone. See the Telephone Feature Card 
or see Changing how you dial your calls on page 82.
Making a...