Nortel Modular Ics 6.0 System Coordinator Guide

Frequently used programming operations / 31
P0992640 03 Modular ICS 6.0 System Coordinator Guide
The clock controls the schedules used for services such as ringing 
and routing services.
After a power failure, the clock is behind by the length of time 
power was lost. For example, if the power is out for two minutes, 
the clock is two minutes behind. 
Adding or changing a system speed dial
You program a speed dial on your Norstar so that anyone in your 
office can dial a frequently used number using a...

32 / Frequently used programming operations
Modular ICS 6.0 System Coordinator Guide P0992640 03
Add or change the telephone number
Select a line for the speed dial code  
If you assign a specific line to a system speed dial number, only telephones with 
an appearance of that line can use the speed dial number.
Press ≠.
Press ââÚ.
You can pick any system speed dial code between 001 and 255.
Press ≠.
Press CHANGE.
Use the dialpad to program the telephone number 
that you want to add. The telephone number...

Frequently used programming operations / 33
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Choose what shows up on the display  
Program a name for a speed dial
The system has a standard name to display, so it is not necessary for you to 
program one. However, if you have chosen not to display the telephone number, 
you may want a specific name.
Alpha tagging feature: This feature offers name display for calls coming in over 
lines that offer number-only display services. 
If  you specify a name...

34 / Frequently used programming operations
Modular ICS 6.0 System Coordinator Guide P0992640 03
Changing the name of a telephone
Begin the programming session 
 Change the name of a telephone
Use the dialpad and --> until you have the entire 
name.
The name can be up to 16 characters long, including spaces. 
Press # on the numeric dialpad to add spaces.
Press ‘.
Press ¨ to end your session.
Or you can press –, then ‘ to program another speed dial 
number.
Press ².
Press ¥¥ÛßßÜÝÝ.
Press ÛÜßÝß.
Press ≠....

Frequently used programming operations / 35
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Changing the name of a line
Begin the programming session 
Change the name of a line
Decide what name you want to give to the telephone number.
Press the numeric dialpad button that has the first 
letter of the name until the display shows the letter 
you want.
Press -->.
Use the dial pad and --> until you have the entire 
name.
Press  ‘ to use the name you have 
entered.
The name can be up to seven...

36 / Frequently used programming operations
Modular ICS 6.0 System Coordinator Guide P0992640 03
Making changes to Call Forward No Answer
Begin the programming session 
Enter the three-digit number of the line you want 
to name. In this example, the line is 002.
This is the name the display shows if you don’t change it.
Press ≠.
Press CHANGE.
Decide what name you want to give to the line.
Press the dialpad button that has the first letter of 
the name, until the display shows the letter you 
want.
Press...

Frequently used programming operations / 37
P0992640 03 Modular ICS 6.0 System Coordinator Guide
 Change where a call goes when there is no answer
Change the number of times the telephone rings before it is forwarded
Press ÛÜßÝß.
Press ≠.
Enter the internal number (DN) of the telephone or 
voice mail extension. In this example the DN is 225.
If the set has been given a name, it appears on the display.
Press ≠.
Press ≠.
Press ≠.
Press CHANGE and enter the internal number where 
you want the calls to be...

38 / Frequently used programming operations
Modular ICS 6.0 System Coordinator Guide P0992640 03
Making changes to Call Forward on Busy
 Begin the programming session 
Change where a call goes when a telephone is busy
Tip - If the Norstar set is a member of a Hunt Group, the 
Call Forward no answer feature is overridden and the 
Hunt Group call continues to ring until the hunt time has 
expired. For more information on Hunt Groups see 
Programming Hunt Groups on page 161.
Press ².
Press ¥¥ÛßßÜÝÝ.
Press...

Frequently used programming operations / 39
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Making Changes to Do Not Disturb on Busy
When you are on a call and a second call comes in, your 
telephone rings softly to alert you to the second call. You can turn 
this feature on or off for each telephone.
 Begin the programming session 
Change Do Not Disturb on Busy
You can press CLR  to change the destination back to None.
Press ¨ to end your session.
You can press ‘ to continue programming...

40 / Frequently used programming operations
Modular ICS 6.0 System Coordinator Guide P0992640 03
For more information on Call Forward and similar settings, see 
Forwarding your calls to another Norstar telephone on page 
105.
What would you like to do next?
Some of the most common programming tasks are listed below. 
For a comprehensive list of settings and instructions, see either 
the Table of Contents or the Index.
Enter the internal number of the telephone 
extension. This becomes the number for the...