Nortel Modular Ics 6.0 System Coordinator Guide

Table of Contents / 11
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Using Set lock 221
Changing Set Lock programming for a telephone 222
Using an auxiliary ringer 222
Turning the auxiliary ringer for a telephone on or off 223
Using Host System dialing signals 223
Link 223
Preventing a telephone from using Link 224
Pause 225
Long Tones 225
Programmed Release 226
Run/Stop 226
Wait for Dial Tone 227
Using pulse dialing for a call 227
Using your Norstar system from an external location 228...

12 / Table of Contents
Modular ICS 6.0 System Coordinator Guide P0992640 03
Volume bar 241
Troubleshooting 243
Using the alarm telephone 243
Reporting and recording alarm codes 243
Testing the telephone 243
Testing the telephone display 244
Testing the telephone buttons 245
Testing the speaker in the telephone handset 245
Testing the telephone headset 245
Testing the telephone speaker 246
Testing the power supply to a telephone 246
Common feature displays 247
Glossary 251
Index 269
Backup programming...

P0992640 03 Modular ICS 6.0 System Coordinator Guide
 / 13
Getting started with Norstar
Your Norstar digital key system has many powerful features that 
can be customized to keep up with changes in your workplace. 
Using this guide
The person who is responsible for adding or moving telephones 
or making changes to the system is called the system coordinator. 
This guide is designed to give the system coordinator all the 
information he or she needs to carry out these kinds of jobs.
The first section...

14 / Getting started with Norstar
Modular ICS 6.0 System Coordinator Guide P0992640 03
Understanding programming 
When your system is installed, your installer or customer service 
representative programs it to work with your telephone lines, 
with your private network, if you have one, and with optional 
equipment. They customize the system for your office.  All 
programming is recorded in the 
Modular ICS 6.0 Programming 
Record
.
You may want to further customize your system. For example, 
you can...

Getting started with Norstar / 15
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Before you start
Before you begin programming, plan what changes you want to 
make. Record the changes in the 
Norstar Programming Record so 
that you have the information at hand. For example, if you are 
going to program system speed dial numbers, fill out the page in 
the 
Norstar Programming Record so that you have all the numbers 
and codes handy once you start programming.
What you need to be to do programming...

16 / Getting started with Norstar
Modular ICS 6.0 System Coordinator Guide P0992640 03
Using Buttons
The two-line telephone you use for everyday calling can be used 
for changes and maintenance. Examples of telephones with two-
line displays are shown in the illustration.
Sets used for programming and maintenance
 M7310
 M7324  T7316 

Getting started with Norstar / 17
P0992640 03 Modular ICS 6.0 System Coordinator Guide
The next illustration numbers the buttons that are used for both 
day-to-day communication and programming on the T7316 set.  
The following table describes what each numbered area is used 
for.
Business Series Terminal programming buttons
 DisplayShows instructions for everyday calling as well as 
for programming.
 Display buttonsHave a variety of uses. The current  use is shown 
on the display above each button....

18 / Getting started with Norstar
Modular ICS 6.0 System Coordinator Guide P0992640 03
This guide uses the icons for Business Series Terminal buttons 
in feature code examples. Your set may have different labels, 
or the buttons may be in slightly different locations. Refer to 
the table below for comparable Norstar icons
 Volume rocker switchTurns the volume you hear through the handset 
up or down.
During programming this switch is used to adjust 
settings, such as for the display contrast.
 Mute Mutes...

Getting started with Norstar / 19
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Using the buttons under the display
The three display buttons are used both for telephone features 
and programming. What each button does depends on what the 
display shows. Some display instructions that you may see when 
making changes on the system include OK
, CHANGE, or COPY. In 
this guide, display button instructions are underlined.
Display buttons
The programming overlay
When you begin programming, a group of...

20 / Getting started with Norstar
Modular ICS 6.0 System Coordinator Guide P0992640 03
Business Series Terminal programming overlay 
Placing the programming overlay on a Business Series Terminal 
Displays the first 
setting within a 
menu level
Moves display one 
item forward on the 
current menu level Displays the 
heading for the 
current level
Moves back one 
item on the 
current level
Business
Series
Terminals
Programming
Overlay
Heading
BackShow
Next
Business
Series
Terminals
Programming...